Difference between revisions of "Dual Quad SATA HAT"
| Line 7: | Line 7: | ||
=== Introduction === | === Introduction === | ||
[[File:Quad_sata_hat_angle.png | 500px|right]] | [[File:Quad_sata_hat_angle.png | 500px|right]] | ||
| − | |||
ROCK Pi Dual/Quad SATA HAT is an addon HAT designed for Raspberry Pi 4. It utilizes the high speed USB3 buses on Raspberry Pi 4 and providing a complete NAS solution based on Raspberry Pi 4. It has the following features: | ROCK Pi Dual/Quad SATA HAT is an addon HAT designed for Raspberry Pi 4. It utilizes the high speed USB3 buses on Raspberry Pi 4 and providing a complete NAS solution based on Raspberry Pi 4. It has the following features: | ||
| Line 263: | Line 262: | ||
=== Getting Started === | === Getting Started === | ||
| + | [[File:Quad_sata_hat_ports.jpg | 600px]] | ||
| + | |||
=== Software support === | === Software support === | ||
Revision as of 10:47, 10 December 2019
Home > SATA HAT > Dual/Quad SATA HAT
Introduction
ROCK Pi Dual/Quad SATA HAT is an addon HAT designed for Raspberry Pi 4. It utilizes the high speed USB3 buses on Raspberry Pi 4 and providing a complete NAS solution based on Raspberry Pi 4. It has the following features:
- Up to 4x HDD/SSD, support 2.5inch or 3.5inch SSD
- Utilize two independent USB3 buses on Raspberry Pi 4
- Type C power input with USB PD support for both 2.5inch SSD and Raspberry Pi 4
- External standard ATX power supply support for 3.5inch HDD
- Support HDD suspend mode
- Support software RAID 0/1/5
- Optional PWM control fan for HDD heat dispatching
- Optional OLED display for IP/Storage info
Supplied with this product
Dual version
- ROCK Pi Dual SATA HAT
- Mechanical spacers
- 2x USB 3.0 connection adapter *1
- SATA 7+15P extend cable *2
- ATX 4P power cable *1
Quad version
- ROCK Pi Quad SATA HAT
- Mechanical spacers
- 4x USB 3.0 connection adapter *1
- SATA 7+15P extend cable *4
- ATX 4P power cable *1
SATA HAT Top board(Optional)
- 0.91inch OLED
- One GPIO button
- PWM controlled 40x40mm FAN
Other hardware needed
For 2.5 inch HDD
- Power adapter with USB PD support more than 40W(2.5Q) or 30W(2.5D)
- 2.5inch HDD/SSD
- Raspberry Pi 4 or ROCK Pi 4 with OS running
For 3.5 inch HDD
- ATX PSU > 60W
- 3.5inch HDDs
- Raspberry Pi 4 or ROCK Pi 4 with OS running
Model Number
Since the Raspberry Pi 4 changes the form factor(swapping USB and RJ45), we need different USB connection adapter. The ROCK Pi 4 shares form factor with Raspberry Pi 3/3B+. Below is the different model number:
| Model | Description |
|---|---|
| DF3 | Dual version for ROCK Pi 4, Raspberry Pi 3/3B+ |
| DF4 | Dual version for Raspberry Pi 4 |
| QF3 | Quad version for ROCK Pi 4, Raspberry Pi 3/3B+ |
| QF4 | Quad version for Raspberry Pi 4 |
PINOUT
Pinout for 2x20 PIN
| Description | Function | Pin# | Pin# | Function | Description | |
|---|---|---|---|---|---|---|
| 1 | 2 | VCC5V0_SYS | ||||
| OLED I2C | I2C_SDA | 3 | 4 | VCC5V0_SYS | ||
| OLED I2C | I2C_SCL | 5 | 6 | |||
| 7 | 8 | |||||
| 9 | 10 | |||||
| top board key | GPIO4_C2 | 11 | 12 | |||
| GPIO4_C6 | 13 | 14 | ||||
| 15 | 16 | GPIO4_D2 | reset OLED | |||
| 17 | 18 | |||||
| 19 | 20 | |||||
| 21 | 22 | GPIO_RST1 | reset SATA1/2 | |||
| 23 | 24 | |||||
| 25 | 26 | ADC_IN0 | ||||
| SDA | 27 | 28 | SCL | |||
| 29 | 30 | |||||
| 31 | 32 | |||||
| control tb-fan speed | PWM_33 | 33 | 34 | |||
| 35 | 36 | |||||
| reset SATA3/4 | GPIO_RST2 | 37 | 38 | |||
| 39 | 40 |
Pinout for 2x5 PIN
| Function | Pin# | Pin# | Function | |
|---|---|---|---|---|
| I2C_SDA | 1 | 2 | VCC3V3_SYS | |
| I2C_SCL | 3 | 4 | VCC5V0_SYS | |
| GPIO4_D2 | 5 | 6 | GPIO4_C2 | |
| GND | 7 | 8 | PWM_33 | |
| GND | 9 | 10 | NC |
Getting Started
