Difference between revisions of "Penta SATA HAT"
(→Getting Started) |
(→Model Number) |
||
| Line 52: | Line 52: | ||
=== Model Number === | === Model Number === | ||
| − | The | + | The Penta SATA HAT is designed for ROCK Pi 4, one model only. |
{| class="wikitable" border="1" | {| class="wikitable" border="1" | ||
| Line 59: | Line 59: | ||
! Description | ! Description | ||
|- | |- | ||
| − | | | + | | PF4 |
| − | | Support | + | | Support four 2.5/3.5inch HDD/SSD plus one eSATA |
| − | + | ||
| − | + | ||
| − | + | ||
|} | |} | ||
| − | |||
=== Getting Started === | === Getting Started === | ||
Revision as of 05:47, 8 December 2019
Introduction
ROCK Pi Penta SATA HAT is an addon HAT designed for ROCK Pi 4. It utilizes the high speed PCIe buses on ROCK Pi 4 and providing a complete NAS solution based on ROCK Pi 4. It has the following features:
- Up to 5x HDD/SSD, support 2.5inch or 3.5inch SSD, up to 100T Storage
- 4x SATA + 1x eSATA with power
- Utilize two lanes PCIe 2.1 buses on ROCK Pi 4
- Type C power input with USB PD support for both 2.5inch SSD and ROCK Pi 4
- External standard ATX power supply support for 3.5inch HDD
- Support HDD suspend mode
- Support software RAID 0/1/5
- Optional PWM control fan for HDD heat dispatching
- Optional OLED display for IP/Storage info
Supplied with this product
- Penta SATA HAT
- Mechanical spacers
- M.2 to FPC board and high speed FPC cable
- ATX 4P power cable
- 4x SATA 7+15p extension cable
- 1x eSATA cable
SATA HAT top board(Optional)
- 0.91inch OLED
- One GPIO button
- PWM controlled 40x40mm FAN
Metal Case(Optional)
- Holds up to four 2.5 inch HDDs/SSDs
- Bottom big heatsink for ROCK Pi 4 CPU
- Supports top board
- eSATA connector exported
- Support fan for HDD heat dispatching air flow
Other hardware needed
For 2.5 inch HDD
- Power adapter with USB PD support more than 30W
- 2.5inch HDD/SSD
- ROCK Pi 4 with os running
For 3.5 inch HDD
- ATX Power Supply more than 100W
- 3.5inch HDD
- ROCK Pi 4 with os running
Model Number
The Penta SATA HAT is designed for ROCK Pi 4, one model only.
| Model | Description |
|---|---|
| PF4 | Support four 2.5/3.5inch HDD/SSD plus one eSATA |