Notice: Radxa Wiki is no longer maintained and content is for reference only. Please visit the latest Radxa Documentation site:
docs.radxa.com
Difference between revisions of "Dual Quad SATA HAT"
(→Display/Fan board(Optional)) |
(→Supplied with this product) |
||
| Line 13: | Line 13: | ||
=== Supplied with this product === | === Supplied with this product === | ||
| − | ==== | + | ====Dual version==== |
| − | * Dual | + | * ROCK Pi Dual SATA HAT |
* Mechanical spacers | * Mechanical spacers | ||
| − | * | + | * 2x USB 3.0 connector *1 |
| + | * SATA 7+15P extend cable *2 | ||
| + | * ATX 4P power cable *1 | ||
| − | ==== | + | ====Quad version==== |
| − | * Quad SATA HAT | + | * ROCK Pi Quad SATA HAT |
* Mechanical spacers | * Mechanical spacers | ||
| − | * 4x USB connector | + | * 4x USB 3.0 connector *1 |
| − | * | + | * SATA 7+15P extend cable *4 |
| − | * | + | * ATX 4P power cable *1 |
| − | ==== | + | ==== SATA HAT Top board(Optional) ==== |
* 0.91inch OLED | * 0.91inch OLED | ||
* One GPIO button | * One GPIO button | ||
Revision as of 02:14, 8 December 2019
Contents
Introduction
ROCK Pi Dual/Quad SATA HAT is an addon HAT designed for Raspberry Pi 4. It utilizes the high speed USB3 buses on Raspberry Pi 4 and providing a complete NAS solution based on Raspberry Pi 4. It has the following features:
- Up to 4x HDD/SSD, support 2.5inch or 3.5inch SSD
- Utilize two independent USB3 buses on Raspberry Pi 4
- Type C power input with USB PD support for both 2.5inch SSD and Raspberry Pi 4
- External standard ATX power supply support for 3.5inch HDD
- Support HDD suspend mode
- Support software RAID 0/1/5
- Optional PWM control fan for HDD heat dispatching
- Optional OLED display for IP/Storage info
Supplied with this product
Dual version
- ROCK Pi Dual SATA HAT
- Mechanical spacers
- 2x USB 3.0 connector *1
- SATA 7+15P extend cable *2
- ATX 4P power cable *1
Quad version
- ROCK Pi Quad SATA HAT
- Mechanical spacers
- 4x USB 3.0 connector *1
- SATA 7+15P extend cable *4
- ATX 4P power cable *1
SATA HAT Top board(Optional)
- 0.91inch OLED
- One GPIO button
- PWM controlled 40x40mm FAN
Other hardware needed
2.5 inch version
- Power adapter with USB PD support more than 40W(2.5Q) or 30W(2.5D)
- 2.5inch HDD/SSD
3.5 inch version
- ATX Power Supply more than 100W
- 3.5inch HDD
Model Number
The 2.5 inch version and 3.5 inch version HAT are the same hardware, the difference is the bundle accessories.
| Model | Description |
|---|---|
| 2.5D | Support 2x 2.5inch HDD/SSD |
| 2.5Q | Support 4x 2.5inch HDD/SSD |
| 3.5Q | Support 4x 3.5inch HDD |