Difference between revisions of "Rock5/accessories/radxa-camera-4k"
< Rock5 | accessories
(Created page with "{{rock5_header}} {{Languages|rock5/guide/debian}} ROCK 5 > Accessories > rock5/accessories/radxa-camera-4k | How to use Radxa Camer...") |
|||
| Line 24: | Line 24: | ||
* Reboot the device, you would see devices /dev/video0 to /dev/video19 are created. | * Reboot the device, you would see devices /dev/video0 to /dev/video19 are created. | ||
| + | |||
| + | * Check media pineline | ||
| + | |||
| + | # media-ctl -p | ||
* Start rkaiq camera preview. | * Start rkaiq camera preview. | ||
| Line 30: | Line 34: | ||
$ sudo su | $ sudo su | ||
| − | # gst-launch-1.0 v4l2src device=/dev/video11 ! video/x-raw,format=NV12,width=3840,height=2160, framerate=30/1 ! xvimagesink | + | # test_camera_rkaiq.sh |
| + | |||
| + | The content of file test_camera_rkaiq.sh | ||
| + | |||
| + | <pre> | ||
| + | # cat /usr/local/bin/test_camera_rkaiq.sh | ||
| + | #!/bin/bash | ||
| + | |||
| + | #export GST_DEBUG=*:5 | ||
| + | export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/lib/aarch64-linux-gnu/gstreamer-1.0 | ||
| + | echo "Start RKAIQ Camera Preview!" | ||
| + | |||
| + | # Example: Radxa Camera 4K on ROCK 5B | ||
| + | gst-launch-1.0 v4l2src device=/dev/video11 ! video/x-raw,format=NV12,width=3840,height=2160, framerate=30/1 ! xvimagesink | ||
| + | </pre> | ||
==== Troubleshooting ==== | ==== Troubleshooting ==== | ||
* Post your issue on the forum: https://forum.radxa.com/c/rock5 | * Post your issue on the forum: https://forum.radxa.com/c/rock5 | ||
Latest revision as of 03:27, 3 December 2022
ROCK 5 > Accessories > How to use Radxa Camera 4K
Contents
How to use Radxa Camera 4K
Hardware connection
Software configuration
- Add one line to file /boot/config.txt. Like this.
dtoverlay=rock-5ab-camera-imx415
- And then execute command.
# update_extlinux.sh
- Reboot the device, you would see devices /dev/video0 to /dev/video19 are created.
- Check media pineline
# media-ctl -p
- Start rkaiq camera preview.
Execute the following command with root user in terminal on desktop.
$ sudo su # test_camera_rkaiq.sh
The content of file test_camera_rkaiq.sh
# cat /usr/local/bin/test_camera_rkaiq.sh #!/bin/bash #export GST_DEBUG=*:5 export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/lib/aarch64-linux-gnu/gstreamer-1.0 echo "Start RKAIQ Camera Preview!" # Example: Radxa Camera 4K on ROCK 5B gst-launch-1.0 v4l2src device=/dev/video11 ! video/x-raw,format=NV12,width=3840,height=2160, framerate=30/1 ! xvimagesink
Troubleshooting
- Post your issue on the forum: https://forum.radxa.com/c/rock5