Difference between revisions of "Rock5/hardware/camera/"

Revision as of 06:22, 8 September 2022

    ROCK 5 >  Hardware >  Camera module

MIPI Camera

Radxa Camera 4K

Hardware connection

Software configuration

Add one line to file /boot/config.txt. Like this.

dtoverlay=rock-5ab-camera-imx415

And then execute command.

update_extlinux.sh

Reboot the device, you would see devices /dev/video0 to /dev/video19 are created.

Test command.

gst-launch-1.0 v4l2src device=/dev/video0 io-mode=4 ! videoconvert ! video/x-raw,format=NV12,width=1920,height=1080 ! jpegenc ! multifilesink location=%d.jpg

You would see generated pictures.

USB Camera

Troubleshooting

Post your issue on the forum: https://forum.radxa.com/c/rock5

@@ Line 11: / Line 11: @@
 [[File:Rock-5b-radxa-camera-4k.jpeg | 400px]]
 ==== Software configuration ====
-Find rock-5ab-camera-imx415.dtbo according to the following path
+Add one line to file /boot/config.txt. Like  this.
-        root@rock-5b:/boot/dtbs/5.10.66-20-rockchip-g0cdf37b755fe/rockchip/overlay#
-Edit extlinux.conf in root mode
+ dtoverlay=rock-5ab-camera-imx415
-        root@rock-5b:/boot/extlinux# vi extlinux.conf
-Mount rock-5ab-camera-imx415.dtbo to fdtoverlays
+And then execute command.
-        fdtoverlays  /dtbs/5.10.66-20-rockchip-g0cdf37b755fe/rockchip/overlay/rock-5ab-camera-imx415.dtbo
+ update_extlinux.sh
-==== Verify command（Reference） ====
+Reboot the device, you would see devices /dev/video0 to /dev/video19 are created.
-Camera capture command
-        gst-launch-1.0 v4l2src device=/dev/video0 io-mode=4 ! videoconvert ! video/x-raw,format=NV12,width=1920,height=1080 ! jpegenc ! multifilesink location=%d.jpg
-== USB Camera ==
+Test command.
+ gst-launch-1.0 v4l2src device=/dev/video0 io-mode=4 ! videoconvert ! video/x-raw,format=NV12,width=1920,height=1080 ! jpegenc ! multifilesink location=%d.jpg
+You would see generated pictures.
+== USB Camera ==