Difference between revisions of "Rock/sd lubuntu"

Revision as of 04:51, 24 February 2014

How to set up booting from an SD Card

Get a parameter file from http://dl.radxa.com/rock/images/ubuntu/ change root command entry of parameter file to "root=/dev/mmcblk0p1" upload it with RKBatchTool from here. to the RADXA It should now boot from SD Card

Example parameter file:

FIRMWARE_VER:4.2.2
MACHINE_MODEL:radxa_rock
MACHINE_ID:007
MANUFACTURER:RADXA
MAGIC: 0x5041524B
ATAG: 0x60000800
MACHINE: 3066
CHECK_MASK: 0x80
KERNEL_IMG: 0x60408000
#RECOVER_KEY: 1,1,0,20,0
CMDLINE:console=ttyFIQ0,115200 console=tty0 root=/dev/mmcblk0p1 rw rootfstype=ext4 mac_addr=12:21:34:43:56:65 init=/sbin/init initrd=0x62000000,0x00800000 mtdparts=rk29xxnand:0x00008000@0x00002000(boot),-@0x0000A000(linuxroot)

Create Lubuntu SD Card

Get a rootfs-desktop.img file from http://dl.radxa.com/rock/images/ubuntu/ Create an ext4 partition on sd card you want to boot from

# TODO bash commands

Finally copy root-fs.img to sd card.

$ sudo dd if=mydir/rootfs-desktop.img of=/dev/mmcblk0p1
$ sync

@@ Line 20: / Line 20: @@
 </PRE>
-=== How to make radxa as a WIFI_AP and save the setting that enable WIFI-AP under  android  ===
-If you want to use the radxa rock as a WIFI-AP under android . you can enable the item in settings(More->Portable hotspot->Portable Wi-Fi hotspot).
-But the setting will be cancelled after reboot. we provider image resolves the problem,you can download here.[http://dl.radxa.com/rock/images/android/2014-02-24_softAp/140224_android_softAp.tgz  140224_android_softAp.tgz].
 === Create Lubuntu SD Card ===