Difference between revisions of "Rock/unbrick"
< Rock
(→Unbrick RADXA) |
(→Unbrick Rock) |
||
| Line 2: | Line 2: | ||
=== Unbrick Rock === | === Unbrick Rock === | ||
| − | Is it bricked? | + | Is it bricked?<br /> |
| − | When writing update.img to nand RKBatchTool failes with following message: "Prepare IDB Fail" (or similar error messages like "IDB download failed" when writing to nand with other tools) | + | When writing update.img to nand RKBatchTool failes with following message: "Prepare IDB Fail" (or similar error messages like "IDB download failed" when writing to nand with other tools)<br /> |
| − | Radxa is bricked. | + | Radxa is bricked.<br /> |
| − | To recover it: | + | To recover it:<br /> |
| + | |||
# Turn off Power. | # Turn off Power. | ||
Revision as of 22:06, 22 February 2014
Unbrick Rock
Is it bricked?
When writing update.img to nand RKBatchTool failes with following message: "Prepare IDB Fail" (or similar error messages like "IDB download failed" when writing to nand with other tools)
Radxa is bricked.
To recover it:
- Turn off Power.
- Connect pin 8 and 9 on the nand with a needle and plug OTG USB cable in the PC.
- After Plugin remove needle connection. In RKBatchTool the square should now show up blue (if it isn't blue, retry).
- Click the restore button and upload an update.img
Hints
- Its useful to use a magnifying glass or (smartphone-)camera zoom to get the right pins.
- Always start counting pins on the edge of the chip where the small circle is molded in or printed on.
