Difference between revisions of "Rock/unbrick"
< Rock
(Created page with " === UNBRICK RADXA === Is it bricked? When writing update.img to nand RKBatchTool failes with following message: "Prepare IDB Fail" (or similar error messages like "IDB downl...") |
(→Hints) |
||
| Line 13: | Line 13: | ||
=== Hints === | === Hints === | ||
| − | Its useful to use a magnifying glass or (smartphone-)camera zoom to get the right pins. | + | * Its useful to use a magnifying glass or (smartphone-)camera zoom to get the right pins. |
| − | Always start counting pins on the edge of the chip where the small circle is molded in or printed on. | + | * Always start counting pins on the edge of the chip where the small circle is molded in or printed on. |
Revision as of 21:18, 22 February 2014
UNBRICK RADXA
Is it bricked? When writing update.img to nand RKBatchTool failes with following message: "Prepare IDB Fail" (or similar error messages like "IDB download failed" when writing to nand with other tools) Radxa is bricked. To recover it:
- Turn off Power.
- Connect pin 8 and 9 on the nand INSERT_PIC_LINK_HERE with a needle and plug OTG USB cable in the PC.
- After Plugin remove needle connection. In RKBatchTool the square should now show up blue (if it isn't blue, retry).
- Click the restore button and upload an update.img
Hints
- Its useful to use a magnifying glass or (smartphone-)camera zoom to get the right pins.
- Always start counting pins on the edge of the chip where the small circle is molded in or printed on.