Difference between revisions of "Penta SATA HAT"
(→Supplied with this product) |
(→Power Options) |
||
| Line 69: | Line 69: | ||
==== Power Options ==== | ==== Power Options ==== | ||
| + | |||
| + | Power consumptions for typical disks: | ||
| + | |||
| + | {| class="wikitable" | ||
| + | ! | ||
| + | ! Power Consumption | ||
| + | |- | ||
| + | | SSD | ||
| + | | <3W | ||
| + | |- | ||
| + | | 2.5 HDD | ||
| + | | 3 ~ 5W | ||
| + | |- | ||
| + | | 2.5 HDD | ||
| + | | 5 ~10W | ||
| + | |} | ||
| + | |||
| + | Note: the table above is for reference, check your disk label for the exact power consumption. | ||
| + | More info can be found [https://linustechtips.com/main/topic/1062501-35-vs-25-hdd-power-consumption/ here]. | ||
| + | |||
| + | =====Option 1: Powering from ROCK Pi 40P GPIO header ===== | ||
| + | |||
| + | The ROCK Pi 4 GPIO +5V can provide up to 4A current. You can drive four SSD/HDD directly if your power adapter can provide > 35W power. | ||
| + | |||
| + | =====Option 2: Powering from 12V DC Jack on SATA HAT===== | ||
| + | |||
| + | For Penta SATA HAT, we use 12V DC power jack on SATA HAT since 12V power adapter is much cheaper than USB C PD adapter. Also, users want to power 3.5inch HDD with power adapter instead of ATX PSU. The 12V DC jack is 5.5x2.1mm diameter. You need at least 12V/4A to power four 2.5inch HDD plus eSATA and 12V/6A to power four 3.5inch HDD plus eSATA. | ||
| + | |||
| + | =====Option 3: Power from ATX PSU===== | ||
| + | |||
| + | If you plan to put the SATA HAT in a PC enclosure, then you can use the ATX PSU. Mostly ATX PSU can meet the power requirement. You need a ATX 4P HDD power cable to power the SATA HAT and ROCK Pi 4. | ||
=== Software support === | === Software support === | ||
=== Dimensions === | === Dimensions === | ||
Revision as of 08:21, 12 December 2019
Home > SATA HAT > Penta SATA HAT
Introduction
ROCK Pi Penta SATA HAT is an addon HAT designed for ROCK Pi 4. It utilizes the high speed PCIe buses on ROCK Pi 4 and providing a complete NAS solution based on ROCK Pi 4. It has the following features:
- Up to 5x HDD/SSD, support 2.5inch or 3.5inch SSD, up to 100T Storage
- 4x SATA + 1x eSATA with power
- Utilize two lanes PCIe 2.1 buses on ROCK Pi 4
- Type C power input with USB PD support for both 2.5inch SSD and ROCK Pi 4
- External standard ATX power supply support for HDD and ROCK Pi 4
- 12V DC input for HDD power and ROCK Pi 4.
- Support HDD suspend mode
- Support software RAID 0/1/5
- Optional PWM control fan for HDD heat dispatching
- Optional OLED display for IP/Storage info
Supplied with this product
- Penta SATA HAT
- Mechanical spacers
- M.2 to FPC board and high speed FPC cable
- eSATA to SATA 7+15P cable with power
SATA HAT top board(Optional)
- 0.91inch OLED
- One GPIO button
- PWM controlled 40x40mm FAN
- Cable for SATA HAT to top board
Metal Case(Optional)
- Holds up to four 2.5 inch HDDs/SSDs
- Bottom big heatsink for ROCK Pi 4 CPU
- Supports top board
- Top acrylic cover for OLED display
- One button for powering off and OLED info switch
- eSATA connector exported
- Support fan for HDD heat dispatching air flow
Other hardware needed
- Proper power adapter(Check power options below for more info)
- 2.5inch or 3.5inch HDD/SSD
- ROCK Pi 4 with os running
- optional 7+15P SATA cable(For 3.5inch HDD or extending the length)
Model Number
The Penta SATA HAT is designed for ROCK Pi 4, one model only.
| Model | Description |
|---|---|
| PF4 | Support four 2.5/3.5inch HDD/SSD plus one eSATA |
Getting Started
Power Options
Power consumptions for typical disks:
| Power Consumption | |
|---|---|
| SSD | <3W |
| 2.5 HDD | 3 ~ 5W |
| 2.5 HDD | 5 ~10W |
Note: the table above is for reference, check your disk label for the exact power consumption. More info can be found here.
Option 1: Powering from ROCK Pi 40P GPIO header
The ROCK Pi 4 GPIO +5V can provide up to 4A current. You can drive four SSD/HDD directly if your power adapter can provide > 35W power.
Option 2: Powering from 12V DC Jack on SATA HAT
For Penta SATA HAT, we use 12V DC power jack on SATA HAT since 12V power adapter is much cheaper than USB C PD adapter. Also, users want to power 3.5inch HDD with power adapter instead of ATX PSU. The 12V DC jack is 5.5x2.1mm diameter. You need at least 12V/4A to power four 2.5inch HDD plus eSATA and 12V/6A to power four 3.5inch HDD plus eSATA.
Option 3: Power from ATX PSU
If you plan to put the SATA HAT in a PC enclosure, then you can use the ATX PSU. Mostly ATX PSU can meet the power requirement. You need a ATX 4P HDD power cable to power the SATA HAT and ROCK Pi 4.