Difference between revisions of "Penta SATA HAT"

Revision as of 02:53, 12 December 2019

    Home >  SATA HAT >  Penta SATA HAT

Introduction

ROCK Pi Penta SATA HAT is an addon HAT designed for ROCK Pi 4. It utilizes the high speed PCIe buses on ROCK Pi 4 and providing a complete NAS solution based on ROCK Pi 4. It has the following features:

• Up to 5x HDD/SSD, support 2.5inch or 3.5inch SSD, up to 100T Storage
• 4x SATA + 1x eSATA with power
• Utilize two lanes PCIe 2.1 buses on ROCK Pi 4
• Type C power input with USB PD support for both 2.5inch SSD and ROCK Pi 4
• External standard ATX power supply support for HDD and ROCK Pi 4
• 12V DC input for HDD power and ROCK Pi 4.
• Support HDD suspend mode
• Support software RAID 0/1/5
• Optional PWM control fan for HDD heat dispatching
• Optional OLED display for IP/Storage info

Supplied with this product

• Penta SATA HAT
• Mechanical spacers
• M.2 to FPC board and high speed FPC cable
• eSATA to SATA 7+15P cable with power

SATA HAT top board(Optional)

• 0.91inch OLED
• One GPIO button
• PWM controlled 40x40mm FAN
• Cable for SATA HAT to top board

Metal Case(Optional)

• Holds up to four 2.5 inch HDDs/SSDs
• Bottom big heatsink for ROCK Pi 4 CPU
• Supports top board
• Top acrylic cover for OLED display
• One button for powering off and OLED info switch
• eSATA connector exported
• Support fan for HDD heat dispatching air flow

Other hardware needed

• Proper power adapter(Check power options below for more info)
• 2.5inch or 3.5inch HDD/SSD
• ROCK Pi 4 with os running
• optional 7+15P SATA cable(For 3.5inch HDD or extending the length)

Model Number

The Penta SATA HAT is designed for ROCK Pi 4, one model only.

Getting Started

Power Options

Software support

Dimensions