Difference between revisions of "Dual Quad SATA HAT"
(→Supplied with this product) |
(→Model Number) |
||
| Line 46: | Line 46: | ||
=== Model Number === | === Model Number === | ||
| − | + | Since the Raspberry Pi 4 changes the form factor(swapping USB and RJ45), we need different USB connection adapter. Below is the different model number: | |
| − | + | ||
{| class="wikitable" border="1" | {| class="wikitable" border="1" | ||
| Line 54: | Line 53: | ||
! Description | ! Description | ||
|- | |- | ||
| − | | | + | | DF3 |
| − | | | + | | Dual version for ROCK Pi 4 |
|- | |- | ||
| − | | | + | | DF4 |
| − | | | + | | Dual version for Raspberry Pi 4 |
|- | |- | ||
| − | | | + | | QF3 |
| − | | | + | | Quad version for ROCK Pi 4 |
| + | |- | ||
| + | | QF4 | ||
| + | | Quad version for Raspberry Pi 4 | ||
|} | |} | ||
| − | |||
=== Getting Started === | === Getting Started === | ||
Revision as of 03:12, 8 December 2019
Contents
Introduction
ROCK Pi Dual/Quad SATA HAT is an addon HAT designed for Raspberry Pi 4. It utilizes the high speed USB3 buses on Raspberry Pi 4 and providing a complete NAS solution based on Raspberry Pi 4. It has the following features:
- Up to 4x HDD/SSD, support 2.5inch or 3.5inch SSD
- Utilize two independent USB3 buses on Raspberry Pi 4
- Type C power input with USB PD support for both 2.5inch SSD and Raspberry Pi 4
- External standard ATX power supply support for 3.5inch HDD
- Support HDD suspend mode
- Support software RAID 0/1/5
- Optional PWM control fan for HDD heat dispatching
- Optional OLED display for IP/Storage info
Supplied with this product
Dual version
- ROCK Pi Dual SATA HAT
- Mechanical spacers
- 2x USB 3.0 connection adapter *1
- SATA 7+15P extend cable *2
- ATX 4P power cable *1
Quad version
- ROCK Pi Quad SATA HAT
- Mechanical spacers
- 4x USB 3.0 connection adapter *1
- SATA 7+15P extend cable *4
- ATX 4P power cable *1
SATA HAT Top board(Optional)
- 0.91inch OLED
- One GPIO button
- PWM controlled 40x40mm FAN
Other hardware needed
For 2.5 inch HDD
- Power adapter with USB PD support more than 40W(2.5Q) or 30W(2.5D)
- 2.5inch HDD/SSD
- Raspberry Pi 4 or ROCK Pi 4 with OS running
For 3.5 inch HDD
- ATX PSU > 60W
- 3.5inch HDDs
- Raspberry Pi 4 or ROCK Pi 4 with OS running
Model Number
Since the Raspberry Pi 4 changes the form factor(swapping USB and RJ45), we need different USB connection adapter. Below is the different model number:
| Model | Description |
|---|---|
| DF3 | Dual version for ROCK Pi 4 |
| DF4 | Dual version for Raspberry Pi 4 |
| QF3 | Quad version for ROCK Pi 4 |
| QF4 | Quad version for Raspberry Pi 4 |