Difference between revisions of "Dual Quad SATA HAT"

Revision as of 02:16, 8 December 2019

Introduction

ROCK Pi Dual/Quad SATA HAT is an addon HAT designed for Raspberry Pi 4. It utilizes the high speed USB3 buses on Raspberry Pi 4 and providing a complete NAS solution based on Raspberry Pi 4. It has the following features:

• Up to 4x HDD/SSD, support 2.5inch or 3.5inch SSD
• Utilize two independent USB3 buses on Raspberry Pi 4
• Type C power input with USB PD support for both 2.5inch SSD and Raspberry Pi 4
• External standard ATX power supply support for 3.5inch HDD
• Support HDD suspend mode
• Support software RAID 0/1/5
• Optional PWM control fan for HDD heat dispatching
• Optional OLED display for IP/Storage info

Supplied with this product

Dual version

• ROCK Pi Dual SATA HAT
• Mechanical spacers
• 2x USB 3.0 connector *1
• SATA 7+15P extend cable *2
• ATX 4P power cable *1

Quad version

• ROCK Pi Quad SATA HAT
• Mechanical spacers
• 4x USB 3.0 connector *1
• SATA 7+15P extend cable *4
• ATX 4P power cable *1

SATA HAT Top board(Optional)

• 0.91inch OLED
• One GPIO button
• PWM controlled 40x40mm FAN

Other hardware needed

For 2.5 inch HDD

• Power adapter with USB PD support more than 40W(2.5Q) or 30W(2.5D)
• 2.5inch HDD/SSD
• Raspberry Pi 4 or ROCK Pi 4 with OS running

For 3.5 inch HDD

• ATX PSU > 60W
• 3.5inch HDDs
• Raspberry Pi 4 or ROCK Pi 4 with OS running

Model Number

The 2.5 inch version and 3.5 inch version HAT are the same hardware, the difference is the bundle accessories.

Getting Started

Software support

Dimensions