Difference between revisions of "ROCKPI wireless module"
(→Pinout) |
|||
| Line 44: | Line 44: | ||
=== Pinout === | === Pinout === | ||
| − | Refer ROCKPi Wireless Module Pinout v10.xlsx | + | [https://dl.radxa.com/accessories/wireless-module/ROCKPi_M2_Wireless_Module_Pinout_v10.xlsx Refer ROCKPi M2 Wireless Module Pinout v10.xlsx] |
=== Mechanical === | === Mechanical === | ||
[[File:ROCKPI_Wireless_Module_2D.png]] | [[File:ROCKPI_Wireless_Module_2D.png]] | ||
Revision as of 06:57, 10 December 2019
Contents
Introduction
ROCK Pi Wireless Module is a series of wifi/bluetooth module designed for ROCK Pi SBC. To meet the user's various requirement for the wireless module and to save cost and reduce sku, Radxa defined a custom m.2 wireless module called ROCK Pi M2 Wireless Module. The ROCK Pi M2 Wireless Module bases on a modified version of M.2 wireless standard from PCI Express M.2 Specification by PCI-SIG. It has the following features:
- Support wifi/bt or other wireless protocol in the future
- Support up to four independent external antenna
- Support SDIO 3.0/USB 3.0/PCIe type wireless chip
- Support EEPROM to store module ID and device tree blob
(ROCKPi Wireless Module A3)
Models
| Model | Chip | WiFi | BT | Others |
|---|---|---|---|---|
| ROCK Pi Wireless Module A1 | BCM43436B0 | 2.4G, 36Mbps | 4.2 | |
| ROCK Pi Wireless Module A2 | BCM43456 | 2.4G&5G, 200Mbps | 5.0 | |
| ROCK Pi Wireless Module A3 | BCM43598 | 2.4G&5G, >400Mbps | 5.0 | Support RSDB |
Pinout
Refer ROCKPi M2 Wireless Module Pinout v10.xlsx
Mechanical
