Difference between revisions of "RockpiN10/getting started"
| Line 29: | Line 29: | ||
|- | |- | ||
! Storage | ! Storage | ||
| − | | colspan="3" | 4MB SPI flash <br>μSD card (μSD slot supports up to 128 GB μSD card)<br />M.2 SSD (M.2 connector supports up to | + | | colspan="3" | 4MB SPI flash <br>μSD card (μSD slot supports up to 128 GB μSD card)<br />M.2 SSD (M.2 connector supports up to 8TB M2 NVME SSD) |
|- | |- | ||
! Display | ! Display | ||
| Line 41: | Line 41: | ||
|- | |- | ||
! Wireless | ! Wireless | ||
| − | | colspan="3" | None. Optional ROCK Pi Wireless Module | + | | colspan="3" | None. Optional [[ROCKPI_wireless_module | ROCK Pi Wireless Module]] |
|- | |- | ||
! USB | ! USB | ||
Revision as of 13:08, 3 December 2019
Contents
Features
| Model | ROCK PI N10 Model A | ROCK PI N10 Model B | ROCK PI N10 Model C |
|---|---|---|---|
| SoC CPU GPU NPU |
RK3399Pro Dual Cortex-A72, freqency 1.8Ghz with quad Cortex-A53, frequency 1.4Ghz Mali T860MP4, OpenGL ES 1.1 /2.0 /3.0 /3.1 /3.2, Vulkan 1.0, Open CL 1.1 1.2, DX11 | ||
| Memory | LPDDR3 4GB 64bit dual channel LPDDR3@1866Mb/s, 3GB for CPU/GPU, 1GB for NPU |
LPDDR3 6GB 64bit dual channel LPDDR3@1866Mb/s, 4GB for CPU/GPU, 2GB for NPU |
LPDDR3 8GB 64bit dual channel LPDDR3@1866Mb/s, 4GB for CPU/GPU, 4GB for NPU |
| Storage | on board high performance eMMC 16GB | on board high performance eMMC 32GB | on board high performance eMMC 64GB |
| Storage | 4MB SPI flash μSD card (μSD slot supports up to 128 GB μSD card) M.2 SSD (M.2 connector supports up to 8TB M2 NVME SSD) | ||
| Display | HDMI 2.0 up to 4k@60 MIPI DSI 2 lanes via FPC connector 4 lanes eDP 1.3, up to 4K*2K@60 Any two of HDMI, MIPI DSI and eDP can work at the same time, support mirror mode or extend mode. | ||
| Audio | 3.5mm jack with mic HD codec that supports up to 24-bit/96KHz audio. | ||
| Camera | MIPI CSI 2 lanes via FPC connector, support up to 800 MP camera. | ||
| Wireless | None. Optional ROCK Pi Wireless Module | ||
| USB | USB 3.0 OTG X1, hardware switch for host/device switch, front one USB 2.0 HOST X2 | ||
| Ethernet | GbE LAN with Power over Ethernet (PoE) support additional HAT is required for powering from PoE | ||
| IO | 40-pin expansion header 2 x UART 2 x SPI bus 3 x I2C bus 1 x PCM/I2S 1 x SPDIF 2 x PWM 1 x ADC 6 x GPIO 2 x 5V DC power in 2 x 3.3V DC power in | ||
| Others | RTC RTC battery connector for time backup(optional) | ||
| Power | USB PD, support USB Type C PD 2.0, 9V/2A, 12V/2A, 15V/2A, 20V/2A. Qualcomm® Quick ChargeTM: Supports QC 3.0/2.0 adapter, 9V/2A, 12V/1.5A | ||
| Size | 100mm x 100mm | ||