Difference between revisions of "PoE HAT"

Revision as of 11:11, 28 June 2019

English

    Home >  ROCK Pi PoE HAT

Introduction

ROCK Pi PoE HAT is a HAT accessories designed for Raspberry Pi and ROCK Pi 4. The PoE HAT allows you to power your Raspberry Pi or ROCK Pi 4 using Power over Ethernet–enabled networks; for this product to be used, the network it is connected to needs to have power-sourcing equipment installed.

It comes with the following features:

802.3at up to 21W(5V/4.2A)
PWM control FAN up to 12000RPM
Temperature sensor DS18B20
Optional 40PIN GPIO pass-through exported
Compatible with ROCK Pi 4, Raspberry Pi 3B+ and Raspberry Pi 4
Clean design by hiding the fan and the big transformer inside
EEPROM for HAT identity and driver probe

Supplied with this product

ROCK Pi PoE HAT
Mechanical spacers

Other hardware needed

A Raspberry Pi 4 Model B or Raspberry Pi 3 Model B+ or ROCK Pi 4
An Ethernet cable
Power-sourcing equipment for a 802.3af Power over Ethernet network

Model

Model	Description
F3	Design for Raspberry Pi 3B+/4
F4	Use with ROCK Pi 4

The difference between F3 and F4 is, F3 and F4 uses different GPIO for fan control. F4 use ADC for temperature detection, while F3 uses DS18B20.

PINOUT

Raspberry Pi	ROCK Pi 4	Pin#	Pin#	ROCK Pi 4	Raspberry Pi
		1	2	+5.0V	+5.0V
		3	4	+5.0V	+5.0V
		5	6	GND	GND
BCM4	GPIO2_B3	7	8
GND	GND	9	10
	PWM0	11	12
	PWM1	13	14	GND	GND
BCM22	GPIO4_C5	15	16	GPIO4_D2
		17	18
		19	20	GND	GND
		21	22
		23	24
GND	GND	25	26	ADC_IN0
I2C0_SDA	I2C2_SDA	27	28	I2C2_SLK	I2C0_SCL
		29	30	GND	GND
		31	32
PWM1	GPIO2_B4	33	34	GND	GND
		35	36
		37	38
GND	GND	39	40

@@ Line 53: / Line 53: @@
 === PINOUT ===
+{| class="wikitable"
+! Raspberry Pi || ROCK Pi 4 ||  Pin# || || Pin# || ROCK Pi 4 || Raspberry Pi
+|-
+|    || || 1 ||  || 2 || +5.0V || +5.0V
+|-
+|    ||  || 3 ||  || 4 || +5.0V || +5.0V
+|-
+|    ||  || 5 ||  || 6 || GND || GND
+|-
+| BCM4 || GPIO2_B3 || 7 ||  || 8 ||   ||
+|-
+| GND || GND|| 9 ||  || 10  ||    ||
+|-
+| || PWM0 || 11 ||  || 12 ||    ||
+|-
+| || PWM1 || 13 ||  || 14  || GND || GND
+|-
+| BCM22 || GPIO4_C5 || 15 ||  || 16  || GPIO4_D2 ||
+|-
+|    ||  || 17 ||  || 18 ||   ||
+|-
+|    ||  || 19 ||  || 20 || GND || GND
+|-
+|    || || 21 ||  || 22 ||    ||
+|-
+|    ||  || 23 ||  || 24 ||   ||
+|-
+| GND || GND || 25 ||  || 26 || ADC_IN0 ||
+|-
+| I2C0_SDA || I2C2_SDA || 27 ||  || 28 || I2C2_SLK || I2C0_SCL
+|-
+|    ||  || 29 ||  || 30 || GND || GND
+|-
+|    ||  || 31||  || 32 ||    ||
+|-
+| PWM1 || GPIO2_B4 || 33 ||  || 34 || GND || GND
+|-
+|    ||  || 35 ||  || 36 ||    ||
+|-
+|    ||  || 37 ||  || 38 ||    ||
+|-
+| GND || GND || 39 ||  || 40 ||    ||
+|}
 === Fan Speed Control ===
 === Dimensions ===