Difference between revisions of "Rock/resize linux rootfs"
< Rock
PeiYao Wang (Talk | contribs) (Created page with "The default size of lubuntu firmware's roofts is about 2.0G, it's too small, you can do as follows to expends it 1: For Nand image If you flash the image on nand flash, you c...") |
PeiYao Wang (Talk | contribs) |
||
| Line 1: | Line 1: | ||
| − | |||
| + | '''The default size of lubuntu firmware's roofts is about 2.0G, it's too small, you can do as follows to expends it. | ||
| + | '''But there are two kinds of firmware, one is for nand,and another one is for sdcard. So you should use different method to do it''' | ||
| + | |||
| + | |||
1: For Nand image | 1: For Nand image | ||
If you flash the image on nand flash, you can execute the below command on the terminal in the board's lubuntu system | If you flash the image on nand flash, you can execute the below command on the terminal in the board's lubuntu system | ||
| Line 13: | Line 16: | ||
If you use the sdcard's image, you should put the sdcard into a card reader ,and put the card reader into PC and resize the partations | If you use the sdcard's image, you should put the sdcard into a card reader ,and put the card reader into PC and resize the partations | ||
| − | + | ||
| + | |||
| + | a) For PC with Linux | ||
Use gparted | Use gparted | ||
| Line 25: | Line 30: | ||
[[File:wiki_resize_sd_3.jpg]] | [[File:wiki_resize_sd_3.jpg]] | ||
| − | + | b) For PC with windows | |
| + | |||
| + | //No useful methods has found. | ||
Revision as of 04:39, 20 December 2014
The default size of lubuntu firmware's roofts is about 2.0G, it's too small, you can do as follows to expends it. But there are two kinds of firmware, one is for nand,and another one is for sdcard. So you should use different method to do it
1: For Nand image
If you flash the image on nand flash, you can execute the below command on the terminal in the board's lubuntu system
"resize2fs /dev/block/mtd/by-name/linux-root "
to expand the rootfs
2: For sdcard image
If you use the sdcard's image, you should put the sdcard into a card reader ,and put the card reader into PC and resize the partations
a) For PC with Linux
Use gparted
- sudo gparted /dev/sdb
b) For PC with windows
//No useful methods has found.