Difference between revisions of "Rock5/guide/build-u-boot-on-5b"

Latest revision as of 10:30, 18 July 2023

English

    ROCK 5 >  Guide >  Build U-Boot on ROCK 5B

Build Vendor U-Boot on Rock 5B

Vendor U-Boot can be compiled and flashed on the Rock 5B device from the Linux distribution. For mainline U-boot, please check collabora's upstream uboot note

Preparation

1. Install the necessary build dependencies:

sudo apt-get update
sudo apt-get install -y git  device-tree-compiler libncurses5 libncurses5-dev build-essential libssl-dev mtools bc python dosfstools flex bison

If you're not using Debian or Ubuntu, you'll need to install the equivalent packages for your distribution.

2. Set up your workspace and get the source code from the Radxa Git repositories:

mkdir ~/rk3588-sdk && cd ~/rk3588-sdk
git clone -b stable-5.10-rock5 https://github.com/radxa/u-boot.git
git clone -b master https://github.com/radxa/rkbin.git
git clone -b debian https://github.com/radxa/build.git

And you will get

/~/rk3588-sdk/
├── build
├── rkbin
└── u-boot

~/rk3588-sdk/build/: Radxa helper script files and configuration files for building U-Boot, Linux kernel and rootfs.
~/rk3588-sdk/rkbin/: Pre-built Rockchip binaries, including first stage loader and ATF (Arm Trustzone Firmware)
~/rk3588-sdk/u-boot/: Second stage bootloader used to start the OS (e.g. Linux or Android)

Build U-Boot

Compile U-Boot with the rock-5b-rk3588_defconfig:

cd ~/rk3588-sdk
./build/mk-uboot.sh rk3588-rock-5b     #For ROCK 5B

After a successful build, the ~/rk3588-sdk/out/u-boot directory will be populated

~/rk3588-sdk/out/u-boot
├── idbloader.img
├── rk3588_spl_loader_v1.08.111.bin
├── spi
│   └── spi_image.img
└── u-boot.itb

Flash U-Boot

Once you've built U-Boot, you can flash it to your desired storage device. Booting directly from an NVMe device requires flashing U-Boot to SPI (see SPI NVMe Boot Guide).

Note that flashable OS images already include U-Boot, so manually flashing U-Boot is not necessary for eMMC or SD Card installs.

The following commands assume they are run from the ~/rk3588-sdk directory.

eMMC

⚠️ Some versions of the Rock 5B kernel have the eMMC and SD Card devices swapped

sudo dd if=./out/u-boot/idbloader.img of=/dev/mmcblk0 bs=512 seek=64
sudo dd if=./out/u-boot/u-boot.itb of=/dev/mmcblk0 bs=512 seek=16384

SD Card

⚠️ Some versions of the Rock 5B kernel have the eMMC and SD Card devices swapped

sudo dd if=./out/u-boot/idbloader.img of=/dev/mmcblk1 bs=512 seek=64
sudo dd if=./out/u-boot/u-boot.itb of=/dev/mmcblk1 bs=512 seek=16384

SPI NOR

sudo dd if=./out/u-boot/idbloader.img of=/dev/mtdblock0 bs=512 seek=64
sudo dd if=./out/u-boot/u-boot.itb of=/dev/mtdblock0 bs=512 seek=16384

Alternative Method

The Radxa U-Boot build scripts also produce a 16MB convenience image suitable for flashing to SPI. This image includes the first-stage loader (idbloader.img) and U-Boot (u-boot.itb) at the right offsets and is sized appropriately for the SPI chip but is otherwise identical to flashing the individual components.

sudo dd if=./out/u-boot/spi/spi_image.img of=/dev/mtdblock0 bs=512

Troubleshooting

Check ROCK 5 FAQs first, if it doesn't help, start a new post on the forum https://forum.radxa.com/c/rock5.

@@ Line 4: / Line 4: @@
      [[rock5 | ROCK 5]] > [[rock5/guide | Guide]] > [[rock5/guide/build-u-boot-on-5b | Build U-Boot on ROCK 5B]]
-== Build U-Boot on ROCK 5B ==
+== Build Vendor U-Boot on Rock 5B ==
-=== Rockchip Debian SDK ===
+Vendor U-Boot can be compiled and flashed on the Rock 5B device from the Linux distribution. For mainline U-boot, please check [https://gitlab.collabora.com/hardware-enablement/rockchip-3588/notes-for-rockchip-3588/-/blob/main/upstream_uboot.md collabora's upstream uboot note]
-Below is the instructions of how to build u-boot image for ROCK 5 on rock5b board.
+=== Preparation ===
-Available boards:
+. Install the necessary build dependencies:
-* ROCK 5B
+ sudo apt-get update
+ sudo apt-get install -y git  device-tree-compiler libncurses5 libncurses5-dev build-essential libssl-dev mtools bc python dosfstools flex bison
-==== Get the source code ====
+If you're not using Debian or Ubuntu, you'll need to install the equivalent packages for your distribution.
-You need Git to get multiple git repositories to build the image.
+. Set up your workspace and get the source code from the Radxa Git repositories:
-Install Git if you don't have it.
- sudo apt-get update
- sudo apt-get install git
-Clone the source code
   mkdir ~/rk3588-sdk && cd ~/rk3588-sdk
@@ Line 31: / Line 25: @@
 And you will get
-  build   rkbin u-boot
+  /~/rk3588-sdk/
+ ├── build
+ ├── rkbin
+ └── u-boot
-Directories usage introductions:
+* <code>~/rk3588-sdk/build/</code>: Radxa helper script files and configuration files for building U-Boot, Linux kernel and rootfs.
+* <code>~/rk3588-sdk/rkbin/</code>: Pre-built Rockchip binaries, including first stage loader and ATF (Arm Trustzone Firmware)
+* <code>~/rk3588-sdk/u-boot/</code>: Second stage bootloader used to start the OS (e.g. Linux or Android)
-* build:
+=== Build U-Boot ===
-** Some script files and configuration files for building u-boot, kernel and rootfs.
-* rkbin:
-** Prebuilt Rockchip binaries, include first stage loader and ATF(Arm Trustzone Firmware).
-* u-boot:
-** u-boot as the second stage bootloader
-==== Install other build tools ====
- sudo apt-get install device-tree-compiler libncurses5 libncurses5-dev build-essential libssl-dev mtools bc python dosfstools flex bison
-==== Build u-boot ====
-Need to checkout branch to '''stable-5.10-rock5'''.
-Build u-boot with default '''rock-5b-rk3588_defconfig'''.
+Compile U-Boot with the <code>rock-5b-rk3588_defconfig</code>:
   cd ~/rk3588-sdk
   ./build/mk-uboot.sh rk3588-rock-5b     #For ROCK 5B
-The generated images will be copied to out/u-boot folder
+After a successful build, the <code>~/rk3588-sdk/out/u-boot</code> directory will be populated
+ ~/rk3588-sdk/out/u-boot
+ ├── idbloader.img
+ ├── rk3588_spl_loader_v1.08.111.bin
+ ├── spi
+ │   └── spi_image.img
+ └── u-boot.itb
+=== Flash U-Boot ===
+Once you've built U-Boot, you can flash it to your desired storage device.
+Booting directly from an NVMe device requires flashing U-Boot to SPI (see [[rock5/guide/spi-nvme-boot | SPI NVMe Boot Guide]]).
- ls out/u-boot/
+Note that [[Rock5/downloads | flashable OS images]] already include U-Boot, so manually flashing U-Boot is not necessary for eMMC or SD Card installs.
- idbloader.img  rk3588_spl_loader_v1.07.111.bin  spi  u-boot.itb
-==== Write u-boot ====
+The following commands assume they are run from the <code>~/rk3588-sdk</code> directory.
-. you should check file in out/u-boot should be like this:
+===== eMMC =====
+⚠️ Some versions of the Rock 5B kernel have the eMMC and SD Card devices swapped
-  ls out/u-boot/
+  sudo dd if=./out/u-boot/idbloader.img of=/dev/mmcblk0 bs=512 seek=64
- idbloader.img  rk3588_spl_loader_v1.07.111.bin  spi  u-boot.itb
+  sudo dd if=./out/u-boot/u-boot.itb of=/dev/mmcblk0 bs=512 seek=16384
-. flash u-boot to you storage
+===== SD Card =====
-* emmc
+⚠️ Some versions of the Rock 5B kernel have the eMMC and SD Card devices swapped
- sudo dd if=./idbloader.img of=/dev/mmcblk1 bs=512 seek=64
- sudo dd if=./u-boot.itb of=/dev/mmcblk1 bs=512 seek=16384
-* sdcard
+  sudo dd if=./out/u-boot/idbloader.img of=/dev/mmcblk1 bs=512 seek=64
-  sudo dd if=./idbloader.img of=/dev/mmcblk0 bs=512 seek=64
+  sudo dd if=./out/u-boot/u-boot.itb of=/dev/mmcblk1 bs=512 seek=16384
-  sudo dd if=./u-boot.itb of=/dev/mmcblk0 bs=512 seek=16384
-* spi nor
+===== SPI NOR =====
-  sudo dd if=./idbloader.img of=/dev/mtdblock0 bs=512 seek=64
+  sudo dd if=./out/u-boot/idbloader.img of=/dev/mtdblock0 bs=512 seek=64
-  sudo dd if=./u-boot.itb of=/dev/mtdblock0 bs=512 seek=16384
+  sudo dd if=./out/u-boot/u-boot.itb of=/dev/mtdblock0 bs=512 seek=16384
-==== FAQs ====
+====== Alternative Method ======
+The Radxa U-Boot build scripts also produce a 16MB convenience image suitable for flashing to SPI.
+This image includes the first-stage loader (<code>idbloader.img</code>) and U-Boot (<code>u-boot.itb</code>) at the right offsets and is sized appropriately for the SPI chip but is otherwise identical to flashing the individual components.
+ sudo dd if=./out/u-boot/spi/spi_image.img of=/dev/mtdblock0 bs=512
-==== Troubleshooting ====
+=== Troubleshooting ===
 Check [[rock5/FAQs |ROCK 5 FAQs]] first, if it doesn't help, start a new post on the forum https://forum.radxa.com/c/rock5.