Difference between revisions of "Rockpi4/hardware/powersupply"
m (→Introduction: move usb pd and usb qc on same line) |
RadxaYuntian (Talk | contribs) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
=== Introduction === | === Introduction === | ||
| − | * The ROCK Pi 4 is powered by Type-C port and has a wide range of input voltage, from | + | * The ROCK Pi 4 is powered by Type-C port and has a wide range of input voltage, from 6V to 12V. |
| − | * USB Type-C PD 2.0 with 9V | + | * USB Type-C PD 2.0 with 9V/2A and 12V/2A is supported. QC 3.0/2.0 with 9V/2A and 12V/1.5A is also supported. |
* The Type-C cable being used needs to support data communication. | * The Type-C cable being used needs to support data communication. | ||
| − | |||
| − | |||
| − | |||
| − | |||
Latest revision as of 06:07, 20 September 2022
Introduction
- The ROCK Pi 4 is powered by Type-C port and has a wide range of input voltage, from 6V to 12V.
- USB Type-C PD 2.0 with 9V/2A and 12V/2A is supported. QC 3.0/2.0 with 9V/2A and 12V/1.5A is also supported.
- The Type-C cable being used needs to support data communication.