Difference between revisions of "Wireless module"
(→Schematic) |
RadxaYuntian (Talk | contribs) |
||
| Line 1: | Line 1: | ||
=== Introduction === | === Introduction === | ||
| − | Radxa Wireless Module is a series of wifi/ | + | Radxa Wireless Module is a series of wifi/BT module designed for ROCK Pi SBC. To meet the user's various requirement for the wireless module and to save cost and reduce sku, Radxa defined a custom m.2 wireless module called Radxa M2 Wireless Module. The Radxa M2 Wireless Module bases on a modified version of M.2 wireless standard from ''PCI Express M.2 Specification by PCI-SIG''. It has the following features: |
* Support wifi/bt or other wireless protocol in the future | * Support wifi/bt or other wireless protocol in the future | ||
Latest revision as of 03:39, 29 September 2022
Introduction
Radxa Wireless Module is a series of wifi/BT module designed for ROCK Pi SBC. To meet the user's various requirement for the wireless module and to save cost and reduce sku, Radxa defined a custom m.2 wireless module called Radxa M2 Wireless Module. The Radxa M2 Wireless Module bases on a modified version of M.2 wireless standard from PCI Express M.2 Specification by PCI-SIG. It has the following features:
- Support wifi/bt or other wireless protocol in the future
- Support up to four independent external antenna
- Support SDIO 3.0/USB 3.0/PCIe type wireless chip
- Support EEPROM to store module ID and device tree blob
(Radxa Wireless Module A3)
Models
| Model | Chip | WiFi | BT | Others |
|---|---|---|---|---|
| Radxa Wireless Module A1 | BCM43436B0 | 2.4G, 36Mbps | 4.2 | |
| Radxa Wireless Module A2 | BCM43456 | 2.4G&5G, 200Mbps | 5.0 | |
| Radxa Wireless Module A3 | BCM43598 | 2.4G&5G, >400Mbps | 5.0 | Support RSDB |
Pinout
Refer Radxa Wireless Module Pinout v10.xlsx
Schematic
Mechanical
