Difference between revisions of "Rock5/CM5"
< Rock5
(Created page with "{{rock3_header}} {{Languages|rock5/cm5}} __NOTOC__ == ROCK5 Compute Module == Radxa ROCK5 Computing Module(Radxa CM5) is a System-on-Module based on the ROCK5, containing...") |
|||
| Line 1: | Line 1: | ||
| − | {{ | + | {{rock5_header}} |
{{Languages|rock5/cm5}} | {{Languages|rock5/cm5}} | ||
| Line 91: | Line 91: | ||
| 3 x 100Pin B2B connector | | 3 x 100Pin B2B connector | ||
|} | |} | ||
| + | |||
| + | [[File:Cm5_pcb_top.png | 400px ]] [[File:Cm5_pcb_bottom.png | 400px]] | ||
Revision as of 11:26, 27 January 2022
ROCK5 Compute Module
Radxa ROCK5 Computing Module(Radxa CM5) is a System-on-Module based on the ROCK5, containing processor, memory, eMMC Flash and Power Management Unit. These modules allow a designer to leverage the ROCK5 hardware and software stack in their own custom systems and form factors. In addition these modules have extra IO interfaces over and above what is available on the ROCK5 boards, opening up more options for the designer.
Radxa CM5 is compatible with CM3 and Raspberry Pi CM4.
Specification
| Raspberry Pi CM4 | Radxa CM3 | Radxa CM5 |
|---|---|---|
| Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz | Rockchip RK3566, Quad core Cortex-A55 (ARM v8) 64-bit SoC @ 2.0GHz | Rockchip RK3588S, Quad core Cortex-A76 (ARM v8) 64-bit SoC @ 2.4GHz + Quad core Cortex-A55 64-bit SoC @ 1.8GHz |
| Small Footprint 55mm × 40mm × 4.7mm module | Small Footprint 55mm × 40mm × 4.7mm module | Small Footprint 55mm × 40mm × 4.7mm module |
| Options for 1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM with ECC | Options for 1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM with ECC | Options for 4GB or 8GB or 16GB LPDDR4x-4224 SDRAM |
| Options for 0GB (CM4Lite), 8GB, 16GB, or 32GB eMMC Flash memory, Peak eMMC bandwidth 100MBytes/s | Options for 0GB, 8GB, 16GB, 32GB, 64GB, 128GB eMMC Flash memory, Peak eMMC bandwidth 250MBytes/s | Options for 0GB, 8GB, 16GB, 32GB, 64GB, 128GB eMMC Flash memory, Peak eMMC bandwidth 250MBytes/s |
| Option for WiFi5/BT5 | Option for WiFi5/BT5 | Option for WiFi6E/BT 5.2 |
| Gigabit Ethernet PHY supporting IEEE 1588 | Gigabit Ethernet PHY(RTL8211F), optional IEEE 1588 support | 1x GMAC, without phy on SoM |
| 1 × USB 2.0 port ( highspeed ) | 1 x USB 2.0 port ( highspeed ), 1 x USB 3.0 port (5Gbps) | 1 x USB 2.0 port, 1 x USB C 3.1 port (5Gbps), 1x USB 3.0 host port |
| 1 × PCIe 1-lane Host, Gen 2 ( 5Gbps ) | 1 x PCIe 1-lane Host, Gen 2 ( 5Gbps ) | 2 x PCIe 1-lan host, Gen 2.1 (5Gbps) |
| N/A | 2 x SATA ports, one shared with USB 3, one shared with PCIe | 2 x SATA ports, one shared with USB 3, one shared with PCIe |
| 2 x HDMI 2.0(up to 4K60) | 1 x HDMI(up to 4K60) | 1 x HDMI(up to 8K60) |
| MIPI DSI: - 1 × 2-lane MIPI DSI display port - 1 × 4-lane MIPI DSI display port |
MIPI DSI: - 2 × 4-lane MIPI DSI display port(MIPI DSI0, MIPI DSI1) - 1 x 4-lane LVDS support(shared with MIPI DSI0) |
MIPI DSI: - 2 × 4-lane MIPI DSI display port(MIPI DSI0, MIPI DSI1) |
| eDP: - 1 x eDP up to 4K60 |
eDP: - 1 x eDP up to 8K60(shared with HDMI) | |
| MIPI CSI-2: - 1 × 2-lane MIPI CSI camera port - 1 × 4-lane MIPI CSI camera port |
MIPI CSI-2: - 1 × 2-lane MIPI CSI camera port - 1 × 4-lane MIPI CSI camera port |
MIPI CSI-2: - 1 × 2-lane MIPI CSI camera port - 1 × 4-lane MIPI CSI camera port |
| 1 × SDIO 2.0 (CM4Lite only) | 1 x SDIO 3.0 | 1 x SDIO 3.0 |
| N/A | Audio Codec | |
| 28 × GPIO supporting either 1.8v or 3.3v signalling and peripheral options: - Up to 5 × UART - Up to 5 × I2C - Up to 5 × SPI - 1 × SDIO interface - 1 × DPI (Parallel RGB Display) - 1 × PCM Up to - 2× PWM channels - Up to 3× GPCLK outputs |
50 × GPIO supporting either 1.8v or 3.3v signalling and peripheral options: - Up to 8 × UART - Up to 8 × I2C - Up to 4 × SPI - 1 × SDIO interface - 1 × PCM - Up to 8 × PWM channels - 2 x ADC |
50 × GPIO supporting either 1.8v or 3.3v signalling and peripheral options: - Up to 8 × UART - Up to 8 × I2C - Up to 4 × SPI - 1 × SDIO interface - 1 × PCM - Up to 8 × PWM channels - 2 x ADC |
| Single +5v PSU input | Single +5v PSU input | Single +5v PSU input |
| 2 x 100Pin B2B connector | 3 x 100Pin B2B connector | 3 x 100Pin B2B connector |
