Difference between revisions of "PoE HAT"

@@ Line 1: / Line 1: @@
-{{Languages|PoE_HAT}}
-__NOTOC__
-    [[home | Home]] > [[PoE_HAT | ROCK Pi PoE HAT]]
-=== Introduction ===
 <div class="col-md-12 ">
-    <div class="col-md-8 ">
+<div class="col-md-4 ">
+    <div class="panel panel-hearts-white">
+        <div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-hand-o-up"></i>  [[ROCKPI_23W_PoE_HAT | ROCK Pi 23W PoE HAT ]]</h3> </div>
+        <div class="panel-body">
-ROCK Pi PoE HAT is a HAT accessories designed for Raspberry Pi and ROCK Pi 4. The PoE HAT allows you to power your Raspberry Pi or ROCK Pi 4 using Power over Ethernet–enabled networks; for this product to be used, the network it is connected to needs to have power-sourcing equipment installed.
+[[File:Rockpi_with_poe_hat.png | 400px|link=ROCKPI_23W_PoE_HAT]]
-It comes with the following features:
-* 802.3at up to 21W(5V/4.2A)
-* PWM control FAN up to 12000RPM
-* Temperature sensor DS18B20
-* Optional 40PIN GPIO pass-through exported
-* Compatible with ROCK Pi 4, Raspberry Pi 3B+ and Raspberry Pi 4
-* Clean design by hiding the fan and the big transformer inside
-* EEPROM for HAT identity and driver probe
+        </div>
      </div>
-    <div class="col-md-4 ">
-[[File:Rockpi_with_poe_hat.png | 400px]]
-    </div>
 </div>
-=== Supplied with this product ===
+<div class="col-md-4 ">
-* ROCK Pi PoE HAT
+    <div class="panel panel-hearts-white">
-* Mechanical spacers
+        <div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-hand-o-up"></i>  [[ROCKPI_13W_PoE_HAT | ROCK Pi 13W PoE HAT ]]</h3> </div>
-=== Other hardware needed ===
+        <div class="panel-body">
-* A Raspberry Pi 4 Model B or Raspberry Pi 3 Model B+ or ROCK Pi 4
-* An Ethernet cable
-* Power-sourcing equipment for a 802.3af or 802.3at Power over Ethernet network
-=== Software support ===
+[[File:Rockpi_e_with_13w_poe_angel.jpg|400px|link=ROCKPI_13W_PoE_HAT]]
-'''For Raspberry Pi 3B+/4B'''
+        </div>
+    </div>
+</div>
-Install our software to  control the fan by following command
+<div class="col-md-4 ">
+    <div class="panel panel-hearts-white">
+        <div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-hand-o-up"></i>  [[ROCKPI_S_PoE_HAT | ROCK Pi S PoE HAT ]]</h3> </div>
+        <div class="panel-body">
-  curl -sL https://rock.sh/get-rockpi-poe | sudo -E bash -
+[[File:S_PoE_HAT.png|400px|link=ROCKPI_S_PoE_HAT]]
-'''For Rockpi 4'''
+        </div>
+    </div>
+</div>
-Work In Process. Coming soon.
+</div>
-=== Model ===
-{| class="wikitable" border="1"
-|-
-! Model
-! Description
-|-
-| F3
-| Design for Raspberry Pi 3B+/4
-|-
-| F3L
-| F3 with 40PIN GPIO pass-through exported
-|-
-| F4
-| Use with ROCK Pi 4
-|-
-| F4L
-| F4 with 40PIN GPIO pass-through exported
-|}
-The difference between F3 and F4 is, F3 and F4 uses different GPIO for fan control. F4 use ADC for temperature detection, while F3 uses DS18B20.
-=== PINOUT ===
-==== PoE HAT for ROCK Pi 4(Model F4) ====
-{| class="wikitable"
-! Description || Function ||  Pin# || || Pin# || Function || Description
-|-
-|    || || 1 ||  || 2 ||    ||
-|-
-|    ||  || 3 ||  || 4 ||    ||
-|-
-|    ||  || 5 ||  || 6 ||    ||
-|-
-|    || GPIO2_B3 || 7 ||  || 8 ||   ||
-|-
-|    ||  || 9 ||  || 10  ||    ||
-|-
-|   ||   || 11 ||  || 12 ||    ||
-|-
-| control fan speed || PWM1 || 13 ||  || 14  ||    ||
-|-
-|   || GPIO4_C5 || 15 ||  || 16  || GPIO4_D2 || enable/disable fan control chip
-|-
-|    ||  || 17 ||  || 18 ||   ||
-|-
-|    ||  || 19 ||  || 20 ||    ||
-|-
-|    || || 21 ||  || 22 ||    ||
-|-
-|    ||  || 23 ||  || 24 ||   ||
-|-
-|    ||  || 25 ||  || 26 || ADC_IN0 || Get ADC value to get the temperature value
-|-
-| connect to EEPROM SDA pin || I2C2_SDA || 27 ||  || 28 || I2C2_SCL || connect to EEPROM SCL pin
-|-
-|    ||  || 29 ||  || 30 ||    ||
-|-
-|    ||  || 31||  || 32 ||    ||
-|-
-|   ||   || 33 ||  || 34 ||    ||
-|-
-|    ||  || 35 ||  || 36 ||    ||
-|-
-|    ||  || 37 ||  || 38 ||    ||
-|-
-|    ||  || 39 ||  || 40 ||    ||
-|}
-==== PoE HAT for Raspberry Pi 3B+/4 (Model F3) ====
-{| class="wikitable"
-! Description || Function ||  Pin# || || Pin# || Function || Description
-|-
-|    || || 1 ||  || 2 ||    ||
-|-
-|    ||  || 3 ||  || 4 ||    ||
-|-
-|    ||  || 5 ||  || 6 ||    ||
-|-
-| get data from DS18B20 || BCM4 || 7 ||  || 8 ||   ||
-|-
-|    ||  || 9 ||  || 10  ||    ||
-|-
-| ||   || 11 ||  || 12 ||    ||
-|-
-| ||   || 13 ||  || 14  ||    ||
-|-
-| enable/disable fan control chip  || BCM22 || 15 ||  || 16  ||   ||
-|-
-|    ||  || 17 ||  || 18 ||   ||
-|-
-|    ||  || 19 ||  || 20 ||    ||
-|-
-|    || || 21 ||  || 22 ||    ||
-|-
-|    ||  || 23 ||  || 24 ||   ||
-|-
-|    ||  || 25 ||  || 26 ||   ||
-|-
-| connect to EEPROM SDA pin || I2C0_SDA || 27 ||  || 28 || I2C0_SCL || connect to EEPROM SDA pin
-|-
-|    ||  || 29 ||  || 30 ||    ||
-|-
-|    ||  || 31||  || 32 ||    ||
-|-
-| control fan speed || PWM1 || 33 ||  || 34 ||    ||
-|-
-|    ||  || 35 ||  || 36 ||    ||
-|-
-|    ||  || 37 ||  || 38 ||    ||
-|-
-|    ||  || 39 ||  || 40 ||    ||
-|}
-=== Fan Control ===
-Turn the  fan on or off by systemctl
-  sudo systemctl start rockpi-poe.service
-  sudo systemctl stop rockpi-poe.service
-Edit /etc/rockpi-poe.conf to set up temperature of the fan speed level, take it effect by below command
-  sudo systemctl restart rockpi-poe.service
-=== Dimensions ===
-* [https://dl.radxa.com/accessories/poe-hat/rockpi_poe_hat_V1.2_20190521.dwg Download 2D file(.dwg) for ROCK Pi PoE HAT]

Difference between revisions of "PoE HAT"

Latest revision as of 10:14, 25 August 2020

ROCK Pi 23W PoE HAT

ROCK Pi 13W PoE HAT

ROCK Pi S PoE HAT