Notice: Radxa Wiki is no longer maintained and content is for reference only. Please visit the latest Radxa Documentation site:
docs.radxa.com
Difference between revisions of "Rock/unbrick"
< Rock
(→Unbrick RADXA) |
(→Hints) |
||
| Line 15: | Line 15: | ||
* Its useful to use a magnifying glass or (smartphone-)camera zoom to get the right pins. | * Its useful to use a magnifying glass or (smartphone-)camera zoom to get the right pins. | ||
* Always start counting pins on the edge of the chip where the small circle is molded in or printed on. | * Always start counting pins on the edge of the chip where the small circle is molded in or printed on. | ||
| + | |||
| + | [[File:7w6fu.png]] | ||
Revision as of 22:03, 22 February 2014
Unbrick RADXA
Is it bricked? When writing update.img to nand RKBatchTool failes with following message: "Prepare IDB Fail" (or similar error messages like "IDB download failed" when writing to nand with other tools) Radxa is bricked. To recover it:
- Turn off Power.
- Connect pin 8 and 9 on the nand with a needle and plug OTG USB cable in the PC.
- After Plugin remove needle connection. In RKBatchTool the square should now show up blue (if it isn't blue, retry).
- Click the restore button and upload an update.img
Hints
- Its useful to use a magnifying glass or (smartphone-)camera zoom to get the right pins.
- Always start counting pins on the edge of the chip where the small circle is molded in or printed on.
