Difference between revisions of "Penta SATA HAT"

Revision as of 02:26, 12 December 2019

    Home >  SATA HAT >  Penta SATA HAT

Introduction

ROCK Pi Penta SATA HAT is an addon HAT designed for ROCK Pi 4. It utilizes the high speed PCIe buses on ROCK Pi 4 and providing a complete NAS solution based on ROCK Pi 4. It has the following features:

• Up to 5x HDD/SSD, support 2.5inch or 3.5inch SSD, up to 100T Storage
• 4x SATA + 1x eSATA with power
• Utilize two lanes PCIe 2.1 buses on ROCK Pi 4
• Type C power input with USB PD support for both 2.5inch SSD and ROCK Pi 4
• External standard ATX power supply support for HDD and ROCK Pi 4
• 12V DC input for HDD power and ROCK Pi 4.
• Support HDD suspend mode
• Support software RAID 0/1/5
• Optional PWM control fan for HDD heat dispatching
• Optional OLED display for IP/Storage info

Supplied with this product

• Penta SATA HAT
• Mechanical spacers
• M.2 to FPC board and high speed FPC cable
• ATX 4P power cable
• 4x SATA 7+15p extension cable
• 1x eSATA cable

SATA HAT top board(Optional)

• 0.91inch OLED
• One GPIO button
• PWM controlled 40x40mm FAN

Metal Case(Optional)

• Holds up to four 2.5 inch HDDs/SSDs
• Bottom big heatsink for ROCK Pi 4 CPU
• Supports top board
• Top acrylic cover for OLED display
• One button for powering off and OLED info switch
• eSATA connector exported
• Support fan for HDD heat dispatching air flow

Other hardware needed

For 2.5 inch HDD

• Power adapter with USB PD > 30W
• 2.5inch HDD/SSD
• ROCK Pi 4 with os running

For 3.5 inch HDD

• ATX Power Supply more than 100W or 12V/8A power adapter
• 3.5inch HDD
• ROCK Pi 4 with os running

Model Number

The Penta SATA HAT is designed for ROCK Pi 4, one model only.

Getting Started

Power Options

Software support

Dimensions