Difference between revisions of "ROCKPI wireless module"
(→Mechanical) |
|||
| Line 45: | Line 45: | ||
[https://dl.radxa.com/accessories/wireless-module/ROCKPi_M2_Wireless_Module_Pinout_v10.xlsx Refer ROCKPi M2 Wireless Module Pinout v10.xlsx] | [https://dl.radxa.com/accessories/wireless-module/ROCKPi_M2_Wireless_Module_Pinout_v10.xlsx Refer ROCKPi M2 Wireless Module Pinout v10.xlsx] | ||
| + | |||
| + | === Schematic === | ||
| + | |||
| + | * [https://dl.radxa.com/accessories/wireless-module/rockpi_wireless_module_a1_a2_sch_20191102.pdf ROCKPi Wireless Module A1 and A2 schematic] | ||
| + | * [https://dl.radxa.com/accessories/wireless-module/rockpi_wireless_module_a3_sch_20191102.pdf ROCKPi Wireless Module A3 schematic] | ||
| + | |||
=== Mechanical === | === Mechanical === | ||
[[File:ROCKPI_Wireless_Module_2D.png | 800px]] | [[File:ROCKPI_Wireless_Module_2D.png | 800px]] | ||
Revision as of 07:07, 10 December 2019
Introduction
ROCK Pi Wireless Module is a series of wifi/bluetooth module designed for ROCK Pi SBC. To meet the user's various requirement for the wireless module and to save cost and reduce sku, Radxa defined a custom m.2 wireless module called ROCK Pi M2 Wireless Module. The ROCK Pi M2 Wireless Module bases on a modified version of M.2 wireless standard from PCI Express M.2 Specification by PCI-SIG. It has the following features:
- Support wifi/bt or other wireless protocol in the future
- Support up to four independent external antenna
- Support SDIO 3.0/USB 3.0/PCIe type wireless chip
- Support EEPROM to store module ID and device tree blob
(ROCKPi Wireless Module A3)
Models
| Model | Chip | WiFi | BT | Others |
|---|---|---|---|---|
| ROCK Pi Wireless Module A1 | BCM43436B0 | 2.4G, 36Mbps | 4.2 | |
| ROCK Pi Wireless Module A2 | BCM43456 | 2.4G&5G, 200Mbps | 5.0 | |
| ROCK Pi Wireless Module A3 | BCM43598 | 2.4G&5G, >400Mbps | 5.0 | Support RSDB |
Pinout
Refer ROCKPi M2 Wireless Module Pinout v10.xlsx
Schematic
Mechanical
