Difference between revisions of "Penta SATA HAT"

Revision as of 04:10, 8 December 2019

Introduction

ROCK Pi Penta SATA HAT is an addon HAT designed for ROCK Pi 4. It utilizes the high speed PCIe buses on ROCK Pi 4 and providing a complete NAS solution based on ROCK Pi 4. It has the following features:

• Up to 5x HDD/SSD, support 2.5inch or 3.5inch SSD, up to 100T Storage
• 4x SATA + 1x eSATA with power
• Utilize two lanes PCIe 2.1 buses on ROCK Pi 4
• Type C power input with USB PD support for both 2.5inch SSD and ROCK Pi 4
• External standard ATX power supply support for 3.5inch HDD
• Support HDD suspend mode
• Support software RAID 0/1/5
• Optional PWM control fan for HDD heat dispatching
• Optional OLED display for IP/Storage info

Supplied with this product

• Penta SATA HAT
• Mechanical spacers
• M.2 to FPC board and high speed FPC cable
• ATX 4P power cable
• 4x SATA 7+15p extension cable
• 1x eSATA cable

Display/Fan board(Optional)

• 0.91inch OLED
• One GPIO button
• PWM controlled 40x40mm FAN

Other hardware needed

For 2.5 inch HDD

• Power adapter with USB PD support more than 30W
• 2.5inch HDD/SSD
• ROCK Pi 4 with os running

For 3.5 inch HDD

• ATX Power Supply more than 100W
• 3.5inch HDD
• ROCK Pi 4 with os running

Model Number

The 2.5 inch version and 3.5 inch version HAT are the same hardware, the difference is the bundle accessories.

Getting Started

Software support

Dimensions