Difference between revisions of "ROCKPI wireless module"
| Line 7: | Line 7: | ||
* Support SDIO 3.0/USB 3.0/PCIe type wireless chip | * Support SDIO 3.0/USB 3.0/PCIe type wireless chip | ||
* Support EEPROM to store module ID and device tree blob | * Support EEPROM to store module ID and device tree blob | ||
| + | |||
| + | [[File:ROCKPI_wireless_module_A3.jpg | 600px]] | ||
| + | |||
| + | (ROCKPi Wireless Module A3) | ||
=== Models === | === Models === | ||
Revision as of 09:52, 4 December 2019
Contents
Introduction
ROCK Pi Wireless Module is a series of wifi/bluetooth module designed for ROCK Pi SBC. To meet the user's various requirement for the wireless module and to save cost and reduce sku, Radxa defined a custom m.2 wireless module called ROCK Pi M2 Wireless Module. The ROCK Pi M2 Wireless Module bases on a modified version of M.2 wireless standard from PCI Express M.2 Specification by PCI-SIG. It has the following features:
- Support wifi/bt or other wireless protocol in the future
- Support up to four independent external antenna
- Support SDIO 3.0/USB 3.0/PCIe type wireless chip
- Support EEPROM to store module ID and device tree blob
(ROCKPi Wireless Module A3)
Models
| Model | Chip | WiFi | BT | Others |
|---|---|---|---|---|
| ROCK Pi Wireless Module A1 | BCM43436B0 | 2.4G, 36Mbps | 4.2 | |
| ROCK Pi Wireless Module A2 | BCM43456 | 2.4G&5G, 200Mbps | 5.0 | |
| ROCK Pi Wireless Module A3 | BCM43598 | 2.4G&5G, >400Mbps | 5.0 | Support RSDB |
Pinout
Refer ROCKPi Wireless Module Pinout v10.xlsx
Mechanical
