Difference between revisions of "Dual Quad SATA HAT"
(→Introduction) |
|||
| Line 9: | Line 9: | ||
* Support HDD suspend mode | * Support HDD suspend mode | ||
* Support software RAID 0/1/5 | * Support software RAID 0/1/5 | ||
| − | * | + | * Optional PWM control fan for HDD heat dispatching |
* Optional OLED display for IP/Storage info | * Optional OLED display for IP/Storage info | ||
Revision as of 10:45, 23 September 2019
Contents
Introduction
ROCK Pi Dual/Quad SATA HAT is an addon HAT designed for Raspberry Pi 4. It utilizes the high speed USB3 buses on Raspberry Pi 4 and providing a complete NAS solution based on Raspberry Pi 4. It has the following features:
- Up to 4x HDD/SSD, support 2.5inch or 3.5inch SSD
- Utilize two independent USB3 buses on Raspberry Pi 4
- Type C power input with USB PD support for both 2.5inch SSD and Raspberry Pi 4
- External standard ATX power supply support for 3.5inch HDD
- Support HDD suspend mode
- Support software RAID 0/1/5
- Optional PWM control fan for HDD heat dispatching
- Optional OLED display for IP/Storage info
Supplied with this product
2.5 inch version
- Dual/Quad SATA HAT
- Mechanical spacers
- 4x USB connector/2x USB connector
3.5 inch version
- Quad SATA HAT
- Mechanical spacers
- 4x USB connector
- SATA 4P power cable
- SATA 15P extend cable
Display/Fan board(Optional)
- 0.91inch OLED
- One GPIO button
- PWM controlled 40x40mm FAN
Other hardware needed
2.5 inch version
- Power adapter with USB PD support more than 40W(2.5Q) or 30W(2.5D)
- 2.5inch HDD/SSD
3.5 inch version
- ATX Power Supply more than 100W
- 3.5inch HDD
Model Number
The 2.5 inch version and 3.5 inch version HAT are the same hardware, the difference is the bundle accessories.
| Model | Description |
|---|---|
| 2.5D | Support 2x 2.5inch HDD/SSD |
| 2.5Q | Support 4x 2.5inch HDD/SSD |
| 3.5Q | Support 4x 3.5inch HDD |