Difference between revisions of "Rock/FreeBSD"
Wheelcomplex (Talk | contribs) (→How to boot FreeBSD) |
Wheelcomplex (Talk | contribs) (→How to boot FreeBSD) |
||
| Line 14: | Line 14: | ||
https://wiki.freebsd.org/FreeBSD/arm/Radxa%20Rock | https://wiki.freebsd.org/FreeBSD/arm/Radxa%20Rock | ||
| + | |||
Ubuntu 13.10 amd64 rkflashtool build note: | Ubuntu 13.10 amd64 rkflashtool build note: | ||
| + | |||
| + | |||
1. install libusb.h by sudo apt-get -y install libusb-1.0-0-dev | 1. install libusb.h by sudo apt-get -y install libusb-1.0-0-dev | ||
| − | 2. Use follow Makefile: | + | |
| + | 2. use dmesg or lsusb to check radxa rock is connect ok: | ||
| + | |||
| + | dmesg: | ||
| + | <PRE> | ||
| + | [187435.036508] usb 2-1.1.3: new high-speed USB device number 49 using ehci-pci | ||
| + | [187435.141573] usb 2-1.1.3: New USB device found, idVendor=2207, idProduct=0006 | ||
| + | [187435.141586] usb 2-1.1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=4 | ||
| + | [187435.141592] usb 2-1.1.3: Product: radxa rock | ||
| + | [187435.141598] usb 2-1.1.3: Manufacturer: radxa | ||
| + | [187435.141603] usb 2-1.1.3: SerialNumber: 16EM84955F | ||
| + | </PRE> | ||
| + | |||
| + | lsusb: | ||
| + | |||
| + | <PRE> | ||
| + | Bus 002 Device 050: ID 2207:0006 | ||
| + | </PRE> | ||
| + | |||
| + | we got device ID 0x0006, and modify rkflashtool.c line 49 from #define PID_RK3188 0x310b to #define PID_RK3188 0x0006 | ||
| + | |||
| + | 3. Use follow Makefile: | ||
<PRE> | <PRE> | ||
# | # | ||
Revision as of 07:21, 8 January 2014
Contents
Status
Ganbold, a FreeBSD developer, now get FreeBSD booting on rockchip platform. Ganbold told us only basic stuffs, gpio, dwc usb host mode are working. But this is just a start :) If you are interested, ping ganbold at #radxa irc channel on freenode for more details.
How to boot FreeBSD
The instructions are at FreeBSD ARM wiki
https://wiki.freebsd.org/FreeBSD/arm/Radxa%20Rock
Ubuntu 13.10 amd64 rkflashtool build note:
1. install libusb.h by sudo apt-get -y install libusb-1.0-0-dev
2. use dmesg or lsusb to check radxa rock is connect ok:
dmesg:
[187435.036508] usb 2-1.1.3: new high-speed USB device number 49 using ehci-pci [187435.141573] usb 2-1.1.3: New USB device found, idVendor=2207, idProduct=0006 [187435.141586] usb 2-1.1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [187435.141592] usb 2-1.1.3: Product: radxa rock [187435.141598] usb 2-1.1.3: Manufacturer: radxa [187435.141603] usb 2-1.1.3: SerialNumber: 16EM84955F
lsusb:
Bus 002 Device 050: ID 2207:0006
we got device ID 0x0006, and modify rkflashtool.c line 49 from #define PID_RK3188 0x310b to #define PID_RK3188 0x0006
3. Use follow Makefile:
# all: rkflashtool rkflashtool: rkflashtool.c gcc -o rkflashtool rkflashtool.c -I/usr/include/libusb-1.0/ -lusb-1.0 -O2 -W -Wall clean: rm -f rkflashtool param: sudo ./rkflashtool r 0x0000 0x2000 > /tmp/parm #
Boot log
Boot log can be found here:
http://radxa.com/2013/10/18/freebsd-11-0-is-booting-on-radxa-rock/