RockpiS/hardware/revisions - Revision history

RadxaYuntian at 08:39, 15 September 2022

2022-09-15T08:39:24Z

Jack-ma at 06:44, 11 March 2022

2022-03-11T06:44:37Z

Hipboi: /* V1.2 */

2020-08-21T08:37:46Z

‎V1.2

Hipboi at 07:27, 17 October 2019

2019-10-17T07:27:59Z

Hipboi at 06:37, 17 October 2019

2019-10-17T06:37:20Z

Hipboi at 06:34, 17 October 2019

2019-10-17T06:34:11Z

Hipboi: Created page with "This page describe the hardware revisions of ROCK Pi S. For the different models and features of each models, please refer models page. === V1.0 === * This is the first vers..."

2019-10-17T06:29:14Z

Created page with "This page describe the hardware revisions of ROCK Pi S. For the different models and features of each models, please refer models page. === V1.0 === * This is the first vers..."

New page

This page describe the hardware revisions of ROCK Pi S. For the different models and features of each models, please refer models page.

=== V1.0 ===

* This is the first version of the board, 11 samples are made

=== V1.1===
* Board color changes to yellow :-)
* Change GPIO header to be compatible with ROCK Pi 4
* Swap USB Host on type A and USB OTG on type C, make more sense with single cable for power and adb
* Change SPI flash to SD Nand

===V1.2===
* Add full PDM support on GPIO header according the discussion on the forum
* Swap ethernet status led JP1 pin 11/12 and pin 13/14
* Change resistor R9608 R90304 value to reduce brightness of LED
* Add 5.1K pull down resistor on type C CC pin :-)

@@ Line 32: / Line 32: @@
 Because of the supply chain challenge, Rockchip updated RK3308 version to RK3308BS. For ROCK Pi S V1.3 version manufactured in 2022 and later, we now use the new RK3308B-S version. The [https://dl.radxa.com/rockpis/docs/hw/datasheets/RK3308_Series_S-version_Chip_Hardware_Design_Modification_Introduction_V1.0.1_20211019.pdf hardware difference of S version can be found here] and [https://dl.radxa.com/rockpis/docs/sw/RK3308B-S&RK3308H-S_Software_Compatibility_Introduction_V1.0.0_20211016.pdf software difference explanation can be found here].
-The new ROCK Pi S images released in 2022 already supports both chip version, it's backward compatible with all ROCK Pi S versions.
+<s>The new ROCK Pi S images released in 2022 already supports both chip version, it's backward compatible with all ROCK Pi S versions.</s>Currently the new image is not compatible with the older hardware version. Please refer to the image release page for more information.
 * SoC RK3308 now changed to RK3308B-S version

← Older revision		Revision as of 06:44, 11 March 2022
Line 27:		Line 27:
	===V1.3===		===V1.3===
	* Change 4 PINs MIC on 26P header 2 with SPI/I2C/UART function, as required by some applications. Check [[RockpiS/hardware/gpio#26-pin_Header_2_4 \| V13 GPIO PINOUT]] (Pin 13/14/15/16) for more details		* Change 4 PINs MIC on 26P header 2 with SPI/I2C/UART function, as required by some applications. Check [[RockpiS/hardware/gpio#26-pin_Header_2_4 \| V13 GPIO PINOUT]] (Pin 13/14/15/16) for more details
		+
		+	===V1.3(2022)===
		+
		+	Because of the supply chain challenge, Rockchip updated RK3308 version to RK3308BS. For ROCK Pi S V1.3 version manufactured in 2022 and later, we now use the new RK3308B-S version. The [https://dl.radxa.com/rockpis/docs/hw/datasheets/RK3308_Series_S-version_Chip_Hardware_Design_Modification_Introduction_V1.0.1_20211019.pdf hardware difference of S version can be found here] and [https://dl.radxa.com/rockpis/docs/sw/RK3308B-S&RK3308H-S_Software_Compatibility_Introduction_V1.0.0_20211016.pdf software difference explanation can be found here].
		+
		+	The new ROCK Pi S images released in 2022 already supports both chip version, it's backward compatible with all ROCK Pi S versions.
		+
		+	* SoC RK3308 now changed to RK3308B-S version

← Older revision		Revision as of 08:37, 21 August 2020
Line 24:		Line 24:
	* Change resistor R9608 R90304 value to reduce brightness of LED		* Change resistor R9608 R90304 value to reduce brightness of LED
	* Add 5.1K pull down resistor on type C CC pin :-)		* Add 5.1K pull down resistor on type C CC pin :-)
		+
		+	===V1.3===
		+	* Change 4 PINs MIC on 26P header 2 with SPI/I2C/UART function, as required by some applications. Check [[RockpiS/hardware/gpio#26-pin_Header_2_4 \| V13 GPIO PINOUT]] (Pin 13/14/15/16) for more details

← Older revision		Revision as of 06:37, 17 October 2019
Line 7:		Line 7:


−	This page describe the hardware revisions of ROCK Pi S. For the different models and features of each models, please refer models page.	+	This page describe the hardware revisions of ROCK Pi S. For the different models and features of each models, please refer [[RockpiS/hardware/models \| models]] page.

	=== V1.0 ===		=== V1.0 ===

@@ Line 20: / Line 20: @@
 ===V1.2===
-* Add full PDM support on GPIO header according the discussion on the forum
+* Add full PDM support on GPIO header according to the [https://forum.radxa.com/t/audio-support-rock-pi-s/1686/12 discussion on the forum]
 * Swap ethernet status led JP1 pin 11/12 and pin 13/14
 * Change resistor R9608 R90304 value to reduce brightness of LED
 * Add 5.1K pull down resistor on type C CC pin :-)

@@ Line 1: / Line 1: @@
 This page describe the hardware revisions of ROCK Pi S. For the different models and features of each models, please refer models page.
 === V1.0 ===
-* This is the first version of the board, 11 samples are made
+* This is the first version of the board, 15 samples are made
 === V1.1===