Hipboi at 02:06, 28 March 2022

2022-03-28T02:06:33Z

Hipboi: Created page with "{{rockpiS_header}} {{Languages|rockpiS/dev/usbip}} ROCK Pi S > Development > USB IP"

2022-03-25T12:09:43Z

Created page with "{{rockpiS_header}} {{Languages|rockpiS/dev/usbip}} ROCK Pi S > Development > USB IP"

New page

{{rockpiS_header}}

{{Languages|rockpiS/dev/usbip}}

[[rockpiS | ROCK Pi S]] > [[rockpiS/dev | Development]] > [[rockpiS/dev/usbip | USB IP]]

← Older revision		Revision as of 02:06, 28 March 2022
Line 4:		Line 4:

	[[rockpiS \| ROCK Pi S]] > [[rockpiS/dev \| Development]] > [[rockpiS/dev/usbip \| USB IP]]		[[rockpiS \| ROCK Pi S]] > [[rockpiS/dev \| Development]] > [[rockpiS/dev/usbip \| USB IP]]
		+
		+	__TOC__
		+
		+	The USB/IP Project aims to develop a general USB device sharing system over IP network. To share USB devices between computers with their full functionality, USB/IP encapsulates "USB I/O messages" into TCP/IP payloads and transmits them between computers.
		+
		+	The following guide works on the vendor 4.4 kernel, for mainline kernel, the steps are similar.
		+
		+	=== Install gcc 7 ===
		+
		+	apt remove gcc-8
		+	apt install gcc-7
		+	ln -sf /usr/bin/gcc-7 /usr/bin/gcc
		+
		+	=== Install required libraries ===
		+
		+	apt install libtool
		+	apt install libudev-dev make
		+	apt install hwdata
		+
		+	=== Build ===
		+
		+	USBIP source code is from the Linux kernel, which can be found on [https://github.com/radxa/kernel/tree/stable-4.4-rockpis/tools/usb/usbip github]:
		+
		+	./autogen.sh
		+	./configure --with-tcp-wrappers=no
		+	make install
		+	which usbip
		+
		+	=== Run ===
		+
		+	Plug the USB device to ROCK Pi S USB 2.0 A port:
		+
		+	modprobe usbip_host
		+	usbip list -l
		+	usbip bind -b 3-1