RockpiN10/dev/usb-install - Revision history

Hipboi: /* Boot the board to Maskrom mode */

2021-04-09T07:42:55Z

‎Boot the board to Maskrom mode

Stephen at 04:30, 28 December 2020

2020-12-28T04:30:52Z

Stephen: /* Flash system image via AndroidTool */

2020-12-28T04:28:37Z

‎Flash system image via AndroidTool

Stephen: /* Flash system image via AndroidTool */

2020-12-28T04:28:20Z

‎Flash system image via AndroidTool

Stephen: /* Operation on Windows PC */

2020-12-28T04:27:30Z

‎Operation on Windows PC

Stephen: /* Install by partitions(optional) */

2020-12-28T04:16:00Z

‎Install by partitions(optional)

Stephen: /* Flash system image */

2020-12-28T04:15:54Z

‎Flash system image

Stephen: /* Flash system image via AndroidTool */

2020-12-28T04:15:34Z

‎Flash system image via AndroidTool

Stephen at 04:15, 28 December 2020

2020-12-28T04:15:07Z

Stephen at 04:05, 28 December 2020

2020-12-28T04:05:57Z

@@ Line 18: / Line 18: @@
 To boot ROCK Pi N10 into maskrom mode is simple since we have the maskrom key on board.
-* Power off the board and '''remove any bootable storage media''' such as microSD card. If you have bootloader in SPI flash, you need to shortcut SPI flash first as picture below. Or you can erase SPI flash at first.
+* Power off the board and '''remove any bootable storage media''' such as microSD card. If your board has SPI Flash and you have bootloader in SPI flash, you need to shortcut SPI flash first as picture below. Or you can erase SPI flash at first.
 [[File:Rockpin10_spi_shortcut.jpeg | 300px ]](click to view large image)

@@ Line 6: / Line 6: @@
      [[rockpiN10 | ROCK Pi N10]] > [[rockpiN10/dev | Development]] > [[rockpiN10/dev/usb-install | Install from USB OTG ]]
-This guide describes how to flash the GPT-FORMAT system image from USB OTG port.
+This guide describes how to flash the '''GPT-FORMAT''' system image from USB OTG port.
 ROCK Pi N10 comes with on board eMMC, you can install images to eMMC with USB. The installation is running in Maskrom mode, which is a special running mode that the CPU is waiting for command from USB OTG port. We can flash the system image on Windwos/Linux/Mac. We recommend AndroidTool on Windows PC while rkdeveloptool on Linux/Mac.

@@ Line 69: / Line 69: @@
 * Step  5: Click "Run" and wait until the flash work is done.
-[[File:androidtool-setting.png | 500px ]]
+[[File:androidtool-setting.png | 800px ]]
-[[File:androidtool-download-image.png | 500px ]]
+[[File:androidtool-download-image.png | 800px ]]
 === Operation on Linux/Mac PC ===

@@ Line 69: / Line 69: @@
 * Step  5: Click "Run" and wait until the flash work is done.
-[[File:androidtool-setting.png]]
+[[File:androidtool-setting.png | 500px ]]
-[[File:androidtool-download-image.png]]
+[[File:androidtool-download-image.png | 500px ]]
 === Operation on Linux/Mac PC ===

@@ Line 68: / Line 68: @@
 * Step 4: Add one item line, the Image line. And select the system image.
 * Step  5: Click "Run" and wait until the flash work is done.
 === Operation on Linux/Mac PC ===

@@ Line 169: / Line 169: @@
 | 2 || 528MB ||rootfs || Rootfs
 |}
 When the board is in maskrom mode, flash the partitions with the following command and offset:

@@ Line 134: / Line 134: @@
 On your PC, run the rkdeveloptool
-    rkdeveloptool ld        # List the device
+  rkdeveloptool ld        # List the device
-    DevNo=1	Vid=0x2207,Pid=0x330c,LocationID=305	Maskrom
+  DevNo=1	Vid=0x2207,Pid=0x330c,LocationID=305	Maskrom
 Download the loader (flash helper) to init the ram and prepare the flashing environment etc. If you don't have it, you can download it from [https://dl.radxa.com/rockpin10/images/loader/ here]
-    rkdeveloptool db rk3399pro_loader_3GB_ddr_v1.22.115.bin  # For ROCK Pi N10 Model A
+  rkdeveloptool db rk3399pro_loader_3GB_ddr_v1.22.115.bin  # For ROCK Pi N10 Model A
-    rkdeveloptool db rk3399pro_loader_vxxxx.bin  # For ROCK Pi N10 Model B/C
+  rkdeveloptool db rk3399pro_loader_vxxxx.bin  # For ROCK Pi N10 Model B/C
 Write the GPT image to eMMC, start to write from offset '''0'''.
-    rkdeveloptool wl 0 /path/to/rockpin10xxx-gpt.img
+  rkdeveloptool wl 0 /path/to/rockpin10xxx-gpt.img
 Reboot the device
-    rkdeveloptool rd
+  rkdeveloptool rd
 Now the device should boot the new image on eMMC

@@ Line 6: / Line 6: @@
      [[rockpiN10 | ROCK Pi N10]] > [[rockpiN10/dev | Development]] > [[rockpiN10/dev/usb-install | Install from USB OTG ]]
-ROCK Pi N10 comes with on board eMMC, you can install images to eMMC with USB. The installation is running in Maskrom mode, which is a special running mode that the CPU is waiting for command from USB OTG port. We can flash the system image on Windwos/Linux/Mac. We recommend AndroidTool on Windows PC while rkdeveloptool on Linux/Mac
+This guide describes how to flash the GPT-FORMAT system image from USB OTG port.
 === Requirement ===
@@ Line 41: / Line 43: @@
 [[File:RK_Driver_Assistant_Install_Usb_driver.png]]
-=== Install necessary tools on PC ===
+=== Operation on Windows PC ===
-==== Setup tools, Rockchip_DriverAssitant and AndroidTool, On Windows ====
+==== Setup tools Rockchip_DriverAssitant ====
 Download and extract [https://dl.radxa.com/rock/tools/windows/DriverAssitant_v4.8.zip Rockchip_DriverAssitant V4.8].
@@ Line 56: / Line 58: @@
 Now the driver has been installed successfully!
 Download and extract [https://dl.radxa.com/tools/windows/AndroidTool_Release_v2.69.zip AndroidTool V2.69]
@@ Line 63: / Line 67: @@
 * Step 3: Add one item line, the Loader line. And select the loader.  [https://dl.radxa.com/rockpin10/images/loader/rk3399pro_loader_3GB_ddr_v1.22.115.bin rk3399pro_loader_3GB_ddr_v1.22.115.bin] for ROCK Pi N10 Model A and [https://dl.radxa.com/rockpin10/images/loader/rk3399pro_loader_v1.20.115.bin rk3399pro_loader_v1.20.115.bin] for ROCK Pi N10 Model B/C.
 * Step 4: Add one item line, the Image line. And select the system image.
-* Step  5: Click "Run" and wait until the flash work is done.
+* Step  5: Click "Run" and wait until the flash work is don
 ==== Setup tool rkdeveloptool on Linux PC ====
@@ Line 126: / Line 131: @@
    sudo cp rkdeveloptool /usr/local/bin/
-=== Install to eMMC via USB ===
+==== Flash system image ====
 On your PC, run the rkdeveloptool
@@ Line 148: / Line 153: @@
 Now the device should boot the new image on eMMC
-=== Install by partitions(optional) ===
+==== Install by partitions(optional) ====
 Sometimes we only want to update a partition of the image, for example only the boot partition to update kernel only. We can flash by partitions
@@ Line 168: / Line 173: @@
 When the board is in maskrom mode, flash the partitions with the following command and offset:
-    rkdeveloptool db rk3399pro_loader_*.bin
+  rkdeveloptool db rk3399pro_loader_*.bin
-    rkdeveloptool wl 64 idbloader.img
+  rkdeveloptool wl 64 idbloader.img
-    rkdeveloptool wl 16384 uboot.img
+  rkdeveloptool wl 16384 uboot.img
-    rkdeveloptool wl 24576 trust.img
+  rkdeveloptool wl 24576 trust.img
-    rkdeveloptool wl 32768 boot.img
+  rkdeveloptool wl 32768 boot.img
-    rkdeveloptool wl 1081344 rootfs.img
+  rkdeveloptool wl 1081344 rootfs.img
 === Troubleshooting ===
 * If you have issue with flashing via USB OTG, start a new post on the forum. https://forum.radxa.com/c/dev

@@ Line 43: / Line 43: @@
 === Install necessary tools on PC ===
-==== On Windows ====
+==== Setup tools, Rockchip_DriverAssitant and AndroidTool, On Windows ====
 ==== Setup tool rkdeveloptool on Linux PC ====
@@ Line 63: / Line 82: @@
    ./configure: line 4269: syntax error near unexpected token `LIBUSB1,libusb-1.0'
    ./configure: line 4269: `PKG_CHECK_MODULES(LIBUSB1,libusb-1.0)'
 You should install pkg-config libusb-1.0