Stephen: Created page with "{{rockpiE_header}} {{Languages|rockpiE/dev/usbnet}} ROCK Pi E > Network Management This guide describes how to manage the..."

2020-07-17T03:07:34Z

Created page with "{{rockpiE_header}} {{Languages|rockpiE/dev/usbnet}} ROCK Pi E > Network Management This guide describes how to manage the..."

New page

{{rockpiE_header}}

{{Languages|rockpiE/dev/usbnet}}

[[rockpiE | ROCK Pi E]] > [[RockpiE/network-management | Network Management]]

This guide describes how to manage the network on ROCK Pi E running Ubuntu/Debian system.

=== Part 1: Set Ethernet static IP Address ===

Install some dependency packages

root@rockpie:~# apt-get install netplan.io

Create file, /etc/netplan/01-ethernet.yaml. If there is no /etc/netplan folder, create it.

root@rockpie:~# touch /etc/netplan/01-ethernet.yaml

Add the following contents to the file, /etc/netplan/01-ethernet.yaml and save it.

<pre>
root@rockpie:~# cat /etc/netplan/01-ethernet.yaml
network:
version: 2
renderer: networkd
ethernets:
eth0:
addresses:
- 192.168.42.200/24
gateway4: 192.168.42.1
nameservers:
search:
- mydomain
- otherdomain
addresses:
- "192.168.42.1"
- "8.8.8.8"
eth1:
addresses:
- 192.168.1.205/24
gateway4: 192.168.1.1
nameservers:
search:
- mydomain
- otherdomain
addresses:
- "192.168.1.1"
- "8.8.8.8"
</pre>

Run the commands below to apply the changes.

root@rockpie:~# netplan apply

To validate that your changes are apply, run the commands below to view the IP address configuration details.

<pre>
root@rockpie:~# ip addr show dev eth0
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether b2:ce:7d:ac:34:13 brd ff:ff:ff:ff:ff:ff
inet 192.168.42.200/24 brd 192.168.42.255 scope global eth0
valid_lft forever preferred_lft forever
inet 192.168.42.39/24 brd 192.168.42.255 scope global secondary noprefixroute eth0
valid_lft forever preferred_lft forever
inet6 fe80::c392:6679:1adc:aa9a/64 scope link noprefixroute
valid_lft forever preferred_lft forever

root@rockpie:~# ip addr show dev eth1
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether b2:ce:7d:ac:34:12 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.205/24 brd 192.168.1.255 scope global eth1
valid_lft forever preferred_lft forever
inet 192.168.1.108/24 brd 192.168.1.255 scope global secondary noprefixroute eth1
valid_lft forever preferred_lft forever
inet6 fe80::6aa0:d0f7:4298:b441/64 scope link noprefixroute
valid_lft forever preferred_lft forever
</pre>

=== Part 2: Set Wi-Fi static IP Address ===

<pre>
root@rockpie:~# cat /etc/netplan/02-wireless.yaml
network:
version: 2
renderer: networkd
wifis:
wlan0:
dhcp4: no
dhcp6: no
addresses: [192.168.31.220/24]
gateway4: 192.168.31.1
nameservers:
addresses: [192.168.31.1, 8.8.8.8]
access-points:
"rockpi-5g":
password: "rockpistar"
</pre>

Run the commands below to apply the changes.

root@rockpie:~# netplan apply

Validate that your changes are apply.

<pre>
root@rockpie:~# ip addr show dev wlan0
4: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 7c:a7:b0:0f:e1:b4 brd ff:ff:ff:ff:ff:ff
inet 192.168.31.220/24 brd 192.168.31.255 scope global wlan0
valid_lft forever preferred_lft forever
inet 192.168.1.109/24 brd 192.168.1.255 scope global noprefixroute wlan0
valid_lft forever preferred_lft forever
inet6 fe80::13d9:a11b:7463:40ce/64 scope link noprefixroute
valid_lft forever preferred_lft forever
</pre>

=== Troubleshooting ===

* Refer [[RockpiE/getting_started/troubleshooting | Troubleshooting page]]
* Post your issue on the forum: https://forum.radxa.com/c/rockpie

RockpiE/network-management - Revision history

Stephen: Created page with "{{rockpiE_header}} {{Languages|rockpiE/dev/usbnet}} ROCK Pi E > Network Management This guide describes how to manage the..."