RockpiE/getting started - Revision history

RadxaYuntian at 03:29, 29 September 2022

2022-09-29T03:29:39Z

2020-08-22T14:10:10Z

‎3. Boot the board: fix a typo "dtorage" -> "storage"

2020-07-18T02:29:06Z

‎Close look of ROCK Pi E

2020-06-01T03:10:11Z

‎Option 2: SSH

2020-06-01T03:09:50Z

‎8.LED

2020-06-01T03:04:15Z

‎10.GPIO

2020-06-01T03:04:08Z

‎4. Access from the Host PC/Laptop

2020-06-01T02:57:08Z

‎3. Boot the board

2020-06-01T02:52:02Z

‎Write Image

2020-06-01T02:46:41Z

‎3. Boot the board

@@ Line 61: / Line 61: @@
 |-
 ! Wireless
-| colspan="2" | 802.11 b/g/n wifi <br /> Bluetooth 4.0(rtl8723du/rtl8821cu) <br /> external antenna
+| colspan="2" | 802.11 b/g/n wifi <br /> BT 4.0(rtl8723du/rtl8821cu) <br /> external antenna
 |-
 ! USB
@@ Line 175: / Line 175: @@
 Check [[rockpiE/Debian#WIFI Connection|  WIFI Connection]].
-=== 7.Bluetooth ===
+=== 7.BT ===
-Check [[rockpiE/Debian#Bluetooth|  Bluetooth]].
+Check [[rockpiE/Debian#BT|  BT]].
 === 8.LED ===

@@ Line 130: / Line 130: @@
 ===  3. Boot the board ===
-* Now insert the system dtorage media, uSD Card or eMMC Module into the socket on the board.
+* Now insert the system storage media, uSD Card or eMMC Module into the socket on the board.
 * (Optional) Use the USB to TTL serial cable to setup a connection between PC and ROCK Pi E board. See [[rockpiE/dev/serial-console | Serial Console]].

@@ Line 39: / Line 39: @@
 == Close look of ROCK Pi E ==
 * ROCK Pi E front view
-[[File:ROCKPIE_Front_View.png|700px]]
+[[File:rockpie_view_front.jpg|700px]]
 * ROCK Pi E front with an angle view
-[[File:ROCKPIE_Angle_View.png|700px]]
+[[File:rockpie_view_angle.jpg|700px]]
 * ROCK Pi E back view
-[[File:ROCKPIE_Back_View.png|700px]]
+[[File:rockpie_view_back.jpg|700px]]
 == <span id="get_start_specs"></span> Features ==

@@ Line 159: / Line 159: @@
      ssh rock@ip-of-device
-Note: You can also get the IP of ROCK Pi S from option 1 if you can not access network administrator page.
+Note: You can also get the IP of ROCK Pi E from option 1 if you can not access network administrator page.
 === 5.Network state ===

@@ Line 181: / Line 181: @@
 === 8.LED ===
-ROCK Pi S has Power LED and User LED.
+ROCK Pi E has Power LED and User LED.
 * Power LED

@@ Line 191: / Line 191: @@
 The user LED is green. By default, its blink status shows the running kernel.
-=== 10.GPIO ===
+=== 9.GPIO ===
 ROCK Pi E has one 40-pin expansion headers. Each pin is distinguished by color, more information click [https://wiki.radxa.com/RockpiE/hardware/gpio here]

← Older revision		Revision as of 03:04, 1 June 2020
Line 160:		Line 160:

	Note: You can also get the IP of ROCK Pi S from option 1 if you can not access network administrator page.		Note: You can also get the IP of ROCK Pi S from option 1 if you can not access network administrator page.
		+
		+	=== 5.Network state ===
		+
		+	*Look at network configure:
		+
		+	$ sudo ifconfig
		+
		+	*Test network:
		+
		+	$ ping -c 5 www.google.com
		+
		+	=== 6.WIFI Connection ===
		+
		+	Check [[rockpiE/Debian#WIFI Connection\| WIFI Connection]].
		+
		+	=== 7.Bluetooth ===
		+
		+	Check [[rockpiE/Debian#Bluetooth\| Bluetooth]].
		+
		+	=== 8.LED ===
		+
		+	ROCK Pi S has Power LED and User LED.
		+
		+	* Power LED
		+
		+	The power LED is green. It is always on when ROCK Pi E is given power by default,
		+
		+	* User LED
		+
		+	The user LED is green. By default, its blink status shows the running kernel.
		+
		+	=== 10.GPIO ===
		+
		+	ROCK Pi E has one 40-pin expansion headers. Each pin is distinguished by color, more information click [https://wiki.radxa.com/RockpiE/hardware/gpio here]
		+
		+	Development for GPIO. ROCK Pi E supports libmraa GPIO library, click [[RockpiE/dev/libmraa \| here]] to get more information.

	== Next Step ==		== Next Step ==

← Older revision		Revision as of 02:57, 1 June 2020
Line 137:		Line 137:

	* ROCK Pi E will boot with the green power Led on. And after a while, the another green Led starts blinking.		* ROCK Pi E will boot with the green power Led on. And after a while, the another green Led starts blinking.
		+
		+	=== 4. Access from the Host PC/Laptop ===
		+
		+	==== Option 1: Serial console ====
		+
		+	Check [[rockpiE/dev/serial-console \| Serial Console]]
		+
		+	==== Option 2: SSH ====
		+	SSH server is enabled on port 22 of ROCK Pi E default image.
		+
		+	Please use [https://angryip.org/ angryip] to find your board IP address.
		+
		+	To access ROCK Pi E by SSH, try
		+
		+	ping rockpie.local
		+	ssh rock@rockpie.local
		+
		+	or if your router/network doesn't support Local Domain, you need to check your network/router administrator page and look for the ROCK Pi E ip address.
		+
		+	ping ip-of-device
		+	ssh rock@ip-of-device
		+
		+	Note: You can also get the IP of ROCK Pi S from option 1 if you can not access network administrator page.

	== Next Step ==		== Next Step ==

← Older revision		Revision as of 02:52, 1 June 2020
Line 101:		Line 101:

	=== Write Image ===		=== Write Image ===
		+
		+	* Download the official Ubuntu/Debian system image from [[rockpiE/downloads \| Downloads]].

	* Download the flash tool, etcher, from [[rockpiE/downloads \| Downloads]]. Choose the right version for your host operation system. Here we operate on host Ubuntu 16.04.		* Download the flash tool, etcher, from [[rockpiE/downloads \| Downloads]]. Choose the right version for your host operation system. Here we operate on host Ubuntu 16.04.

@@ Line 134: / Line 134: @@
 * Power on ROCK Pi E by adapter with type C port. The input voltage should be 5V.
-* ROCK Pi E will boot, the green power Led is on, and after a while, the another green Led starts blinking.
+* ROCK Pi E will boot with the green power Led on. And after a while, the another green Led starts blinking.
 == Next Step ==