RockpiE/dev/Debian - Revision history

Stephen: /* Get the source code */

2021-05-23T04:06:08Z

‎Get the source code

Stephen: /* Update the source code */

2021-05-23T03:35:21Z

‎Update the source code

Stephen at 03:10, 23 May 2021

2021-05-23T03:10:17Z

Show changes

Stephen: /* Make rootfs image */

2021-01-21T05:03:21Z

‎Make rootfs image

Stephen: /* Make rootfs image */

2021-01-21T05:02:29Z

‎Make rootfs image

Stephen: /* Install toolchain and other build tools */

2021-01-06T07:17:13Z

‎Install toolchain and other build tools

Stephen: /* FAQs */

2020-05-28T03:38:01Z

‎FAQs

Stephen: /* Troubleshooting */

2020-05-28T02:27:43Z

‎Troubleshooting

Stephen at 02:27, 28 May 2020

2020-05-28T02:27:03Z

Stephen: /* Build kernel */

2020-02-26T05:59:57Z

‎Build kernel

@@ Line 38: / Line 38: @@
 ** Prebuilt Rockchip binaries, include first stage loader and ATF(Arm Trustzone Firmware).
 * rootfs:
-** Bootstrap a Debian based rootfs, support architechture armhf and arm64, support Debian Jessie and Stretch.
+** Bootstrap a Debian based rootfs, support architechture armhf and arm64, support Debian Jessie, Stretch and Buster.
 * u-boot:
 ** u-boot as the second stage bootloader

← Older revision		Revision as of 03:35, 23 May 2021
Line 43:		Line 43:

	==== Update the source code ====		==== Update the source code ====
		+
		+	The rockchip-bsp will be updated all the time, so you can update the source before building the system image.

	cd rockchip-bsp		cd rockchip-bsp

@@ Line 112: / Line 112: @@
 To build 32bit rootfs:
- export ARCH=armhf
+    export ARCH=armhf
 To build 64bit rootfs:
- export ARCH=arm64
+    export ARCH=arm64
 Building a base debian system by ubuntu-build-service from linaro.
- cd rootfs
+    cd rootfs
- sudo apt-get install binfmt-support qemu-user-static cpio gdisk
+    sudo apt-get install binfmt-support qemu-user-static cpio gdisk
- sudo dpkg -i ubuntu-build-service/packages/*        # ignore the broken dependencies, we will fix it next step
+    sudo dpkg -i ubuntu-build-service/packages/*        # ignore the broken dependencies, we will fix it next step
- sudo apt-get install -f
+    sudo apt-get install -f
- RELEASE=buster TARGET=desktop ARCH=arm64 ./mk-base-debian.sh
+    RELEASE=buster TARGET=desktop ARCH=arm64 ./mk-base-debian.sh
 This will bootstrap a Debian Buster image, you will get a rootfs tarball named '''linaro-buster-alip-xxxx.tar.gz'''.
@@ Line 130: / Line 130: @@
 Building the rk-debian rootfs.
- RELEASE=buster ARCH=arm64 ./mk-rootfs.sh
+    RELEASE=buster ARCH=arm64 ./mk-rootfs.sh
 Creating the ext4 image(linaro-rootfs.img):
- ./mk-image.sh
+    ./mk-image.sh
 == Combine everything into one image ==

@@ Line 107: / Line 107: @@
 == Make rootfs image ==
 To build 32bit rootfs:
-    export ARCH=armhf
+ export ARCH=armhf
 To build 64bit rootfs:
-    export ARCH=arm64
+ export ARCH=arm64
 Building a base debian system by ubuntu-build-service from linaro.
-    cd rootfs
+ cd rootfs
-    sudo apt-get install binfmt-support qemu-user-static cpio gdisk
+ sudo apt-get install binfmt-support qemu-user-static cpio gdisk
-    sudo dpkg -i ubuntu-build-service/packages/*        # ignore the broken dependencies, we will fix it next step
+ sudo dpkg -i ubuntu-build-service/packages/*        # ignore the broken dependencies, we will fix it next step
-    sudo apt-get install -f
+ sudo apt-get install -f
-    RELEASE=stretch TARGET=desktop ARCH=$ARCH ./mk-base-debian.sh
+ RELEASE=buster TARGET=desktop ARCH=arm64 ./mk-base-debian.sh
-This will bootstrap a Debian stretch image, you will get a rootfs tarball named '''linaro-stretch-alip-xxxx.tar.gz'''.
+Building the rk-debian rootfs.
-Building the rk-debain rootfs with debug:
+ RELEASE=buster ARCH=arm64 ./mk-rootfs.sh
-    VERSION=debug ARCH=$ARCH ./mk-rootfs-stretch.sh  && ./mk-image.sh
+Creating the ext4 image(linaro-rootfs.img):
-This will install Rockchip specified packages and hooks on the standard Debian rootfs and generate an ext4 format rootfs image at '''rootfs/linaro-rootfs.img'''.
+ ./mk-image.sh
 == Combine everything into one image ==

@@ Line 50: / Line 50: @@
      git submodule update
-== Install toolchain and other build tools ==
+== Install toolchain from Linaro ==
      sudo apt-get install gcc-aarch64-linux-gnu device-tree-compiler libncurses5 libncurses5-dev build-essential libssl-dev mtools

@@ Line 134: / Line 134: @@
 == FAQs ==
-==== 1.With an USB to TTL serial cable connected with UART2 pins (pin#10, pin#8, ping#6 on 40-PIN Header) on ROCK Pi E, system log is shown as follows. ====
+==== 1.I have built one ROCK Pi E system image using rockchip-bsp SDK. With an USB to TTL serial cable connected with UART2 pins (pin#10, pin#8, ping#6 on 40-PIN Header) on ROCK Pi E, the last one line of system logs is shown as follows. ====
-     [    0.001996] Console: colour dummy device 80x25
+     [    0.932225] bootconsole [uart0] disabled
-    [    0.002413] console [tty0] enabled
-    [    0.002743] bootconsole [uart0] disabled
-In fact the system starts up with no system log information shown on screen. If your ROCK Pi E system supports Ethernet/WiFi and SSH, you can access ROCK Pi E by SSH.
+In fact the system starts up. If your ROCK Pi E system supports Ethernet/WiFi and SSH, you can access ROCK Pi E via SSH.
-The FIQ Debugger is disabled by default. If you want to use debugger console, you can modify ROCK Pi E device tree, rk3328-rock-pi-e.dts to enable fiq_debugger node.
+If you read the kernel command line of system log, you will find that the default console is ttyS2 (1500000n8). But due to uart2 is disabled by default in file rk3328-rock-pi-e.dts, there will be no more system logs on the screen.
-    fiq_debugger: fiq-debugger {
+To enable console ttyS2, you need to enable uart2 node. Add the following lines at the end of file rk3328-rock-pi-e.dts.
-        compatible = "rockchip,fiq-debugger";
-        rockchip,serial-id = <2>;
+    &uart2 {
-        rockchip,signal-irq = <159>;
-        rockchip,wake-irq = <0>;
-        /* If enable uart uses irq instead of fiq */
-        rockchip,irq-mode-enable = <0>;
-        rockchip,baudrate = <1500000>;  /* Only 115200 and 1500000 */
-        interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
          status = "okay";
      };

← Older revision		Revision as of 02:27, 28 May 2020
Line 158:		Line 158:
	== Troubleshooting ==		== Troubleshooting ==

−	Check [[RockpiE/FAQs \|ROCK Pi E FAQs]] first, if it doesn't help, start a new post on the forum https://forum.radxa.com/c/~~dev~~	+	Check [[RockpiE/FAQs \|ROCK Pi E FAQs]] first, if it doesn't help, start a new post on the forum https://forum.radxa.com/c/rockpie

@@ Line 131: / Line 131: @@
 When install system image, system.img to uSD card, need APP '''Etcher''' or tool '''dd'''.
 == Troubleshooting ==
 Check [[RockpiE/FAQs |ROCK Pi E FAQs]] first, if it doesn't help, start a new post on the forum https://forum.radxa.com/c/dev

@@ Line 70: / Line 70: @@
 == Build kernel ==
-Need to checkout branch to '''release-4.4-rockpi4'''.
+Need to checkout branch to '''stable-4.4-rockpie'''.
 Build kernel with default '''rockchip_linux_defconfig'''.