Rockpi4/hardware/rockpi4/es es - Revision history

RadxaYuntian at 03:24, 29 September 2022

2022-09-29T03:24:22Z

HANLLEL at 14:03, 15 March 2019

2019-03-15T14:03:34Z

HANLLEL at 22:38, 19 February 2019

2019-02-19T22:38:06Z

HANLLEL at 21:19, 9 February 2019

2019-02-09T21:19:18Z

HANLLEL: /* Conector GPIO - Entrada/Salida de Propósito General */

2019-01-02T22:57:04Z

‎Conector GPIO - Entrada/Salida de Propósito General

HANLLEL: /* Conector GPIO - Entrada/Salida de Propósito General */

2019-01-02T19:41:37Z

‎Conector GPIO - Entrada/Salida de Propósito General

HANLLEL at 05:32, 29 December 2018

2018-12-29T05:32:33Z

HANLLEL at 05:00, 29 December 2018

2018-12-29T05:00:08Z

HANLLEL at 04:56, 29 December 2018

2018-12-29T04:56:03Z

HANLLEL at 07:11, 24 November 2018

2018-11-24T07:11:55Z

@@ Line 15: / Line 15: @@
 == Redes ==
 Los Modelos A y B del ROCK Pi 4 incluyen un puerto Giga Bit Ethernet. En nuestras pruebas hemos obtenido un ancho de banda de al menos 939Mbits/seg. Si te interesa POE (Alimentación sobre Ethernet), deberías adquirir el ROCK Pi 4 Modelo B.
-<br />El ROCK Pi 4 Modelo B incluye WIFI 2.4GHz 802.11 b/g/n y 5G ac/a. Además de Bluetooth 5.0.
+<br />El ROCK Pi 4 Modelo B incluye WIFI 2.4GHz 802.11 b/g/n y 5G ac/a. Además de BT 5.0.
 == Periféricos ==

@@ Line 313: / Line 313: @@
 |}
-== Conector GPIO - Entrada/Salida de Propósito General ==
+== <span id="gpio"> Conector GPIO - Entrada/Salida de Propósito General </span>==
 ROCK Pi 4 tiene 40 pines de expansión. Cada pin se distingue por un color.

@@ Line 318: / Line 318: @@
 {| class="wikitable"
-! Función3 || Función2 || Función1 ||  GPIO ||  Pin# || || Pin# || GPIO || Función1 || Función2 || Función3
+! Número GPIO || Función2 || Función1 ||  GPIO ||  Pin# || || Pin# || GPIO || Función1 || Función2 || Número GPIO
 |-
 | || || +3.3V ||  || style="background:yellow"| 1 ||  ||style="background:red"| 2 ||  || +5.0V ||  ||
 |-
-| CIF_D7 || VOP_D7 || style="background:orange"| I2C7_SDA || GPIO2_A7 || style="background:green; color:white"| 3 || ||  style="background:red"| 4 || || +5.0V ||   ||
+| 71 || || I2C7_SDA || GPIO2_A7 || style="background:green; color:white"| 3 || ||  style="background:red"| 4 || || +5.0V ||   ||
 |-
-| CIF_VSYNC || VOP_CLK || style="background:orange"| I2C7_SCL || GPIO2_B0 || style="background:green; color:white"| 5 || || style="background:black; color:white"| 6 ||  || GND ||   ||
+| 72 || || I2C7_SCL || GPIO2_B0 || style="background:green; color:white"| 5 || || style="background:black; color:white"| 6 ||  || GND ||   ||
 |-
-| CIF_CLKOUT || VOP_DEN || SPI2_CLK || GPIO2_B3 || style="background:green; color:white"| 7 || || style="background:green; color:white"| 8 || GPIO4_C4 || style="background:orange"|DEBUG_TXD ||   ||
+| 75 || || SPI2_CLK || GPIO2_B3 || style="background:green; color:white"| 7 || || style="background:green; color:white"| 8 || GPIO4_C4 || style="background:orange"|DEBUG_TXD ||   || 148
 |-
-| || ||  GND ||  || style="background:black; color:white"| 9 || || style="background:green; color:white"|10 || GPIO4_C3 || style="background:orange"|DEBUG_RXD ||   ||
+| || ||  GND ||  || style="background:black; color:white"| 9 || || style="background:green; color:white"|10 || GPIO4_C3 || style="background:orange"|DEBUG_RXD ||   || 147
 |-
-|VOP1_PWM  || VOP0_PWM ||  PWM0 || GPIO4_C2 || style="background:green; color:white"|11 || || style="background:green; color:white"|12 || GPIO4_A3 || I2S1_SCLK ||   ||
+|146  || ||  PWM0 || GPIO4_C2 || style="background:green; color:white"|11 || || style="background:green; color:white"|12 || GPIO4_A3 || I2S1_SCLK ||   || 131
 |-
-| || || PWM1 || GPIO4_C6 || style="background:green; color:white"|13 ||  || style="background:black; color:white"|14 || || GND ||   ||
+| 150 || || PWM1 || GPIO4_C6 || style="background:green; color:white"|13 ||  || style="background:black; color:white"|14 || || GND ||   ||
 |-
-| || || SPDIF_TX ||  GPIO4_C5 || style="background:green; color:white"|15 || || style="background:green; color:white"|16 || GPIO4_D2 || ||   ||
+| || || SPDIF_TX ||  GPIO4_C5 || style="background:green; color:white"|15 || || style="background:green; color:white"|16 || GPIO4_D2 || ||   || 154
 |-
-| || ||  +3.3V || || style="background:yellow"|17 || || style="background:green; color:white"|18 || GPIO4_D4 || ||   ||
+| || ||  +3.3V || || style="background:yellow"|17 || || style="background:green; color:white"|18 || GPIO4_D4 || ||   || 156
 |-
-| || UART4_TXD ||  SPI1_TXD || GPIO1_B0 || style="background:green; color:white"|19 ||  ||style="background:black; color:white"|20 || || GND ||   ||
+|40 || UART4_TXD ||  SPI1_TXD || GPIO1_B0 || style="background:green; color:white"|19 ||  ||style="background:black; color:white"|20 || || GND ||   ||
 |-
-| || UART4_RXD || SPI1_RXD || GPIO1_A7  || style="background:green; color:white"|21  ||   || style="background:green; color:white"|22  || GPIO4_D5  ||   ||
+|15 || UART4_RXD || SPI1_RXD || GPIO1_A7  || style="background:green; color:white"|21  ||   || style="background:green; color:white"|22  || GPIO4_D5  ||   || || 157
 |-
-| || PMCU_JTAG_TCK ||  SPI1_CLK || GPIO1_B1 || style="background:green; color:white"|23 ||  || style="background:green; color:white"|24 || GPIO1_B2  || SPI1_CSn  || PMCU_JTAG_TMS  ||
+| || ||  SPI1_CLK || GPIO1_B1 || style="background:green; color:white"|23 ||  || style="background:green; color:white"|24 || GPIO1_B2  || SPI1_CSn  ||  || 42
 |-
 | || ||  GND  ||  || style="background:black; color:white"|25  ||   || style="background:green; color:white"|26 ||  || ADC_IN0 ||   ||
 |-
-| CIF_D0 || VOP_D0 ||  I2C2_SDA  || GPIO2_A0 || style="background:blue; color:white"|27  ||  || style="background:blue; color:white"|28 || GPIO2_A1 || I2C2_CLK ||  VOP_D1 || CIF_D1
+| 64 || ||  I2C2_SDA  || GPIO2_A0 || style="background:blue; color:white"|27  ||  || style="background:blue; color:white"|28 || GPIO2_A1 || I2C2_CLK ||  || 65
 |-
-| CIF_CLKIN || I2C6_SCL ||  SPI2_TXD  || GPIO2_B2 || style="background:green; color:white"|29  ||  || style="background:black; color:white"|30 ||  || GND ||   ||
+| 74 || I2C6_SCL ||  SPI2_TXD  || GPIO2_B2 || style="background:green; color:white"|29  ||  || style="background:black; color:white"|30 ||  || GND ||   ||
 |-
-| CIF_HREF || I2C6_SDA ||  SPI2_RXD  || GPIO2_B1 || style="background:green; color:white"|31  ||  || style="background:green; color:white"|32 || GPIO3_C0 || SPDIF_TX || MAC_COL || UART3_CTSn
+| 73 || I2C6_SDA ||  SPI2_RXD  || GPIO2_B1 || style="background:green; color:white"|31  ||  || style="background:green; color:white"|32 || GPIO3_C0 || SPDIF_TX || UART3_CTSn || 112
 |-
-| || ||   SPI2_CSn || GPIO2_B4 || style="background:green; color:white"|33  ||  || style="background:black; color:white"|34 ||  || GND ||   ||
+| 76 || ||   SPI2_CSn || GPIO2_B4 || style="background:green; color:white"|33  ||  || style="background:black; color:white"|34 ||  || GND ||   ||
 |-
-| || ||   I2S1_LRCK_TX || GPIO4_A5 || style="background:green; color:white"|35  ||  || style="background:green; color:white"|36 || GPIO4_A4 || I2S1_LRCK_RX ||   ||
+| 133 || ||   I2S1_LRCK_TX || GPIO4_A5 || style="background:green; color:white"|35  ||  || style="background:green; color:white"|36 || GPIO4_A4 || I2S1_LRCK_RX ||   || 132
 |-
-|  || ||   || GPIO4_D6 || style="background:green; color:white"|37  ||  || style="background:green; color:white"|38 || GPIO4_A6 || I2S1_SDI ||   ||
+| 158 || ||   || GPIO4_D6 || style="background:green; color:white"|37  ||  || style="background:green; color:white"|38 || GPIO4_A6 || I2S1_SDI ||   || 134
 |-
-| || ||   GND ||  || style="background:black; color:white"|39  ||  ||style="background:green; color:white"|40  || GPIO4_A7 || I2S1_SDO ||   ||
+| || ||   GND ||  || style="background:black; color:white"|39  ||  ||style="background:green; color:white"|40  || GPIO4_A7 || I2S1_SDO ||   || 135
 |}

← Older revision		Revision as of 21:19, 9 February 2019
Line 1:		Line 1:
−	~~{{rockpi4_header_es}}~~
	{{Languages\|rockpi4/hardware}}		{{Languages\|rockpi4/hardware}}
		+	{{rockpi4_header_es}}

	<div class="col-md-12" style="text-shadow: 2px 2px 4px #DDDDDD; box-shadow: 2px 2px 5px #999999;">		<div class="col-md-12" style="text-shadow: 2px 2px 4px #DDDDDD; box-shadow: 2px 2px 5px #999999;">

@@ Line 330: / Line 330: @@
 | || ||  GND ||  || style="background:black; color:white"| 9 || || style="background:green; color:white"|10 || GPIO4_C3 || style="background:orange"|DEBUG_RXD ||   ||
 |-
-|VOP1_PWM  || VPO0_PWM ||  PWM0 || GPIO4_C2 || style="background:green; color:white"|11 || || style="background:green; color:white"|12 || GPIO4_A3 || I2S1_SCLK ||   ||
+|VOP1_PWM  || VOP0_PWM ||  PWM0 || GPIO4_C2 || style="background:green; color:white"|11 || || style="background:green; color:white"|12 || GPIO4_A3 || I2S1_SCLK ||   ||
 |-
 | || || PWM1 || GPIO4_C6 || style="background:green; color:white"|13 ||  || style="background:black; color:white"|14 || || GND ||   ||

@@ Line 2: / Line 2: @@
 {{Languages|rockpi4/hardware}}
-<div class="col-md-12" style="box-shadow: 2px 2px 5px #999999;">
+<div class="col-md-12" style="text-shadow: 2px 2px 4px #DDDDDD; box-shadow: 2px 2px 5px #999999;">
 __NOTOC__

@@ Line 1: / Line 1: @@
 {{rockpi4_header_es}}
 {{Languages|rockpi4/hardware}}
 __NOTOC__
@@ Line 369: / Line 371: @@
 * Para I2C-2 y I2C-7
 ** Hemos hecho pruebas usando el dispositivo i2c "e2prom". Necesitamos abrir el fichero de dispositivo i2c, y entonces realizar operaciones de lectura y escritura.