Rockpi4/dev/u-boot/es es - Revision history

HANLLEL at 08:02, 20 October 2019

2019-10-20T08:02:49Z

HANLLEL at 07:38, 20 October 2019

2019-10-20T07:38:19Z

HANLLEL at 07:23, 20 October 2019

2019-10-20T07:23:37Z

HANLLEL: Created page with "{{rockpi4_header}} {{Languages|rockpi4/dev/u-boot}} ROCK Pi 4 > Development > U-boot =Compilar U-boot y ejecutarl..."

2019-10-20T07:19:43Z

Created page with "{{rockpi4_header}} {{Languages|rockpi4/dev/u-boot}} ROCK Pi 4 > Development > U-boot =Compilar U-boot y ejecutarl..."

New page

{{rockpi4_header}}
{{Languages|rockpi4/dev/u-boot}}
[[rockpi4 | ROCK Pi 4]] > [[rockpi4/dev | Development]] > [[rockpi4/dev/u-boot | U-boot]]

=Compilar U-boot y ejecutarlo en ROCK Pi4=

=== Requirement ===
* ROCK Pi 4 mainboard
* A EMMC module or a microSD card
* Power adapter
* '''USB Male A to Male A cable'''(important) USB-C has been seen as not working, an adaptor for USB-C to USB-A has worked. [https://forum.radxa.com/t/otg-flashing-not-working/717 See discussion].
*A a PC/laptop running Linux

==Step 1 Get the source code ==

You need Git to get multiple git repositories to build the image.

Install Git if you don't have it.

sudo apt-get update
sudo apt-get install git

Clone the source code

git clone --recursive https://github.com/radxa/rockchip-bsp.git

You will get

build kernel README.md rkbin rootfs u-boot

Directories usage introductions:

* build:
** Some script files and configuration files for building u-boot, kernel and rootfs.
* kernel:
** kernel source code, current version is 4.4
* rkbin:
** Prebuilt Rockchip binaries, include first stage loader and ATF(Arm Trustzone Firmware).
* rootfs:
** Bootstrap a Debian based rootfs, support architechture armhf and arm64, support Debian Jessie and Stretch.
* u-boot:
** u-boot as the second stage bootloader

==Step 2 Install tool-chain and other tools==

sudo apt-get install gcc-aarch64-linux-gnu device-tree-compiler libncurses5 libncurses5-dev build-essential libssl-dev mtools
sudo apt-get install bc python dosfstools

To build rkdeveloptool on a debain based Linux distribution, follow the instruction below:

Install build dependecy:
sudo apt-get install libudev-dev libusb-1.0-0-dev dh-autoreconf

Clone the source code and build:
git clone https://github.com/rockchip-linux/rkdeveloptool
cd rkdeveloptool
autoreconf -i
./configure
make

If you encounter compile error like below
./configure: line 4269: syntax error near unexpected token `LIBUSB1,libusb-1.0'
./configure: line 4269: `PKG_CHECK_MODULES(LIBUSB1,libusb-1.0)'

You should install pkg-config libusb-1.0
sudo apt-get install pkg-config libusb-1.0

Then re-run
autoreconf -i
./configure
make

Now you have rkdeveloptool executable at the current directory.
sudo cp rkdeveloptool /usr/local/bin/

==Step 3 Build U-boot==

*If you use the ROCK Pi4 A

./build/mk-uboot.sh rockpi4a

*If you use the ROCK Pi4B

./build/mk-uboot.sh rockpi4b

And then you can get the directory 'out'.

==Flash and run U-boot on ROCK Pi4==

Insert a empty EMMC module or microSD card on your ROCK Pi4

Use the USB Male A to Male A cable to connected your PC and ROCK Pi4 and then type

rkdeveloptool ld

You can see the output just like this

DevNo=1 Vid=0x2207,Pid=0x330c,LocationID=302 Maskrom

You can useing this command to flash U-boot

cd ./out/u-boot
sudo rkdeveloptool db ../../rkbin/bin/rk33/rk3399_loader_v1.12.112.bin
sudo rkdeveloptool wl 0x40 idbloader.img
sudo rkdeveloptool wl 0x4000 uboot.img
sudo rkdeveloptool wl 0x6000 trust.img
sudo rkdeveloptool rd

The U-boot were run on your ROCK Pi4 try to type 'help' or '?' to getting started!

@@ Line 51: / Line 51: @@
      sudo apt-get install bc python dosfstools
-To build rkdeveloptool on a debain based Linux distribution, follow the instruction below:
+Compilar rkdeveloptool en una distribución Linux Debian, siguiendo las instrucciones siguientes:
-Install build dependecy:
+Instalar las siguientes dependencias de construcción:
    sudo apt-get install libudev-dev libusb-1.0-0-dev dh-autoreconf
-Clone the source code and build:
+Clonar el código fuente y compilar:
    git clone https://github.com/rockchip-linux/rkdeveloptool
    cd rkdeveloptool
@@ Line 63: / Line 63: @@
    make
-If you encounter compile error like below
+Si encuentras un error de compilación como el siguiente
      ./configure: line 4269: syntax error near unexpected token `LIBUSB1,libusb-1.0'
      ./configure: line 4269: `PKG_CHECK_MODULES(LIBUSB1,libusb-1.0)'
-You should install pkg-config libusb-1.0
+Debes instalar pkg-config libusb-1.0 con el comando:
      sudo apt-get install pkg-config libusb-1.0
-Then re-run
+Entonces re-ejecuta
      autoreconf -i
      ./configure
      make
-Now you have rkdeveloptool executable at the current directory.
+Ahora tendrás el ejecutable rkdeveloptool en el directorio actual.
    sudo cp rkdeveloptool /usr/local/bin/
-==Step 3 Build U-boot==
+==Paso 3 Compilar U-boot==
-*If you use the ROCK Pi4 A
+*Si usas el ROCK Pi4 A
      ./build/mk-uboot.sh rockpi4a
-*If you use the ROCK Pi4B
+*Si usas el ROCK Pi4 B
      ./build/mk-uboot.sh rockpi4b
-And then you can get the directory 'out'.
+Y entonces puedes tener el directorio 'out'.
-==Flash and run U-boot on ROCK Pi4==
+==Grabar y ejecutar U-boot en ROCK Pi4==
-Insert a empty EMMC module or microSD card on your ROCK Pi4
+Inserta una memoria EMMC vacía o una tarjeta microSD en tu ROCK Pi4
-Use the USB Male A to Male A cable to connected your PC and ROCK Pi4 and then type
+Usa el cable USB Macho A a Macho A para conectar tu PC y el ROCK Pi4, entonces teclea
      rkdeveloptool ld
-You can see the output just like this
+Puedes ver que la salida es así
      DevNo=1	Vid=0x2207,Pid=0x330c,LocationID=302	Maskrom
-You can useing this command to flash U-boot
+Puedes usar este comando para grabar el U-boot
      cd ./out/u-boot
@@ Line 112: / Line 112: @@
      sudo rkdeveloptool rd
-The U-boot were run on your ROCK Pi4 try to type 'help' or '?' to getting started!
+El U-boot fue ejecutado en tu ROCK Pi4 intenta teclear 'help' o '?' para empezar.
 </div>

@@ Line 9: / Line 9: @@
 =Compilar U-boot y ejecutarlo en ROCK Pi4=
-=== Requirement ===
+=== Requisitos ===
-* ROCK Pi 4 mainboard
+* Placa ROCK Pi 4
-* A EMMC module or a microSD card
+* Una memoria EMMC o una tarjeta microSD
-* Power adapter
+* Un transformador
-* '''USB Male A to Male A cable'''(important) USB-C has been seen as not working, an adaptor for USB-C to USB-A has worked. [https://forum.radxa.com/t/otg-flashing-not-working/717 See discussion].
+* '''Un cable USB Macho A a Macho A'''(importante) el USB-C se ha visto que no funciona, un adaptador de USB-C a USB-A ha funcionado. [https://forum.radxa.com/t/otg-flashing-not-working/717 Ver discusión].
-*A a PC/laptop running Linux
+* Un PC/portátil que ejecute Linux
-==Step 1 Get the source code ==
+==Paso 1 Obtener el código fuente ==
-You need Git to get multiple git repositories to build the image.
+Necesitas Git para obtener mútiples repositorios git para compilar la imagen.
-Install Git if you don't have it.
+Instala Git si no lo tienes.
      sudo apt-get update
      sudo apt-get install git
-Clone the source code
+Clona el código fuente
      git clone --recursive https://github.com/radxa/rockchip-bsp.git
-You will get
+Tendrás entonces
      build  kernel  README.md  rkbin  rootfs  u-boot
-Directories usage introductions:
+Instrucciones sobre el uso de los Directorios:
 * build:
-** Some script files and configuration files for building u-boot, kernel and rootfs.
+** Contiene algunos ficheros de script y algunos ficheros de construccion de u-boot, del kernel y de rootfs.
 * kernel:
-** kernel source code, current version is 4.4
+** Contiene el código fuente del núcleo, la versión actual es 4.4
 * rkbin:
-** Prebuilt Rockchip binaries, include first stage loader and ATF(Arm Trustzone Firmware).
+** Contiene los binarios precompilados de Rockchip, incluido el cargador de primera etapa y el ATF(Arm Trustzone Firmware).
 * rootfs:
-** Bootstrap a Debian based rootfs, support architechture armhf and arm64, support Debian Jessie and Stretch.
+** Contiene un Bootstrap rootfs con base Debian, soporta arquitecturas armhf y arm64, soporta Debian Jessie y Stretch.
 * u-boot:
-** u-boot as the second stage bootloader
+** Contiene u-boot como segunda etapa del cargador de inicio
-==Step 2 Install tool-chain and other tools==
+==Paso 2 Instalar el tool-chain  y otras herramientas==
      sudo apt-get install gcc-aarch64-linux-gnu device-tree-compiler libncurses5 libncurses5-dev build-essential libssl-dev mtools

@@ Line 1: / Line 1: @@
 {{Languages|rockpi4/dev/u-boot}}
-    [[rockpi4 | ROCK Pi 4]] > [[rockpi4/dev | Development]] > [[rockpi4/dev/u-boot | U-boot]]
+{{rockpi4_header_es}}
 =Compilar U-boot y ejecutarlo en ROCK Pi4=
@@ Line 109: / Line 113: @@
 The U-boot were run on your ROCK Pi4 try to type 'help' or '?' to getting started!