Rockpi4/backup - Revision history

Hipboi: Redirected page to Rock4/backup

2022-08-26T13:25:02Z

Redirected page to Rock4/backup

Setq at 09:51, 31 July 2020

2020-07-31T09:51:41Z

Setq: /* Using Rockpi4 */

2019-08-07T05:37:17Z

‎Using Rockpi4

Setq at 03:50, 25 July 2019

2019-07-25T03:50:00Z

Hipboi at 02:53, 8 April 2019

2019-04-08T02:53:24Z

Hipboi: Created page with " It's always a good ideas to backup your ROCK Pi 4's image on PC. Below tutorial we assume you use uSD card or eMMC module with eMMC-to-uSD adapter. We don't distinguish them..."

2019-04-08T02:52:06Z

Created page with " It's always a good ideas to backup your ROCK Pi 4's image on PC. Below tutorial we assume you use uSD card or eMMC module with eMMC-to-uSD adapter. We don't distinguish them..."

New page

It's always a good ideas to backup your ROCK Pi 4's image on PC. Below tutorial we assume you use uSD card or eMMC module with eMMC-to-uSD adapter. We don't distinguish them since for PC, it's both `SD card`.

== Using Windows ==

One of the best tools to backup and restore SD cards is '''Win32 Disk Imager'''. Download it from [http://sourceforge.net/projects/win32diskimager/files/latest/download SourceForge] and install it. BEFORE starting the software, insert your SD card into the SD card reader on your PC. Often this will open the file explorer showing you the contents of part of your SD card, which should look something like this:

[[File:Sdbackup1.png]]

This is not the whole of the contents of your SD card - only part of the card contents is readable by Windows. The rest is not readable by your PC.

Once you open Win32 Disk Imager, use the blue folder icon to choose the location and the name of the backup you want to take, and then choose the drive letter for your SD card.

[[File:Sdbackup2.png]]

Click on the Read button. The card will then be backed up to your PC.

If you have a problem with your SD card and it becomes unreadable for any reason (e.g. it becomes corrupted), just follow the above instructions, choosing the image you created as the image file, and click on Write to write it back to the SD card. In fact, you can write it back to another SD card of the same size, giving you an exact duplicate.

== Using OSX ==

Insert the SD Card into a card reader on your Mac. Open Terminal and enter the following command to locate your SD Card:

diskutil list

All your disks will be listed, and will look something like below:

[[File:Sdbackup3.png]]

Look for your SD card by looking for a disk of the right size and name. In the above example, the SD Card is /dev/disk1.

Next, in Terminal, enter the following command to create a disc image (.dmg) of your SD Card in your home directory.

sudo dd if=/dev/disk1 of=~/SDCardBackup.dmg

Wait until the SD card has been completely read; the command does not show any feedback, so wait for the command prompt to reappear in the terminal window once it is complete.

Again, if you corrupt your SD card or need to make a copy at any time, you can restore it by following the same approach as above to locate your SD card. Before you can write to the card you have to 'unmount' it so that the operating system does not try to write to it at the same time. Use the following in the Terminal:

diskutil unmountDisk /dev/disk1

Then use the this to write the image back to the SD card:

sudo dd if=~/SDCardBackup.dmg of=/dev/disk1

Once it has finished writing the image to the SD card, you can remove it from your Mac using:

sudo diskutil eject /dev/rdisk3

== Using Linux ==
Before inserting the SD card into the reader on your Linux PC, run the following command to find out which devices are currently available:

df -h

Which will return something like this:
<pre>
Filesystem 1K-blocks Used Available Use% Mounted on
rootfs 29834204 15679020 12892692 55% /
/dev/root 29834204 15679020 12892692 55% /
devtmpfs 437856 0 437856 0% /dev
tmpfs 88432 284 88148 1% /run
tmpfs 5120 0 5120 0% /run/lock
tmpfs 176860 0 176860 0% /run/shm
/dev/mmcblk0p1 57288 14752 42536 26% /boot
Insert the SD card into a card reader and use the same df -h command to find out what is now available:

Filesystem 1K-blocks Used Available Use% Mounted on
rootfs 29834204 15679020 12892692 55% /
/dev/root 29834204 15679020 12892692 55% /
devtmpfs 437856 0 437856 0% /dev
tmpfs 88432 284 88148 1% /run
tmpfs 5120 0 5120 0% /run/lock
tmpfs 176860 0 176860 0% /run/shm
/dev/mmcblk0p1 57288 14752 42536 26% /boot
/dev/sda5 57288 9920 47368 18% /media/boot
/dev/sda6 6420000 2549088 3526652 42% /media/41cd5baa-7a62-4706-b8e8-02c43ccee8d9
</pre>

The new device that wasn't there last time is your SD card.

The left column gives the device name of your SD card, and will look like '/dev/mmcblk0p1' or '/dev/sdb1'. The last part ('p1' or '1') is the partition number, but you want to use the whole SD card, so you need to remove that part from the name leaving '/dev/mmcblk0' or '/dev/sdb' as the disk you want to read from.

Open a terminal window and use the following to backup your SD card:

sudo dd if=/dev/sdb of=~/SDCardBackup.img status=progress

The dd command will show the progress, you just need to wait until the command prompt re-appears.

To restore the image, do exactly the same again to discover which device is your SD card. As with the Mac, you need to unmount it first, but this time you need to use the partition number as well (the 'p1' or '1' after the device name). If there is more than one partition on the device, you will need to repeat the umount command for all partition numbers. For example, if the df -h shows that there are two partitions on the SD card, you will need to unmount both of them:

sudo umount /dev/sdb1
sudo umount /dev/sdb2

Now you are able to write the original image to the SD drive:

sudo dd bs=4M if=~/SDCardBackup.img of=/dev/sdb status=progress

The bs=4M option sets the 'block size' on the SD card to 4Meg. If you get any warnings, then change this to 1M instead, but that will take a little longer to write.

Again, wait while it completes. Before ejecting the SD card, make sure that your Linux PC has completed writing to it using the command:

sudo sync

@@ Line 5: / Line 5: @@
      [[rockpi4 | ROCK Pi 4]] > [[rockpi4/backup | Backup and Restore uSD card or eMMC module]]
-It's always a good ideas to backup your ROCK Pi 4's image on PC. Below tutorial we assume you use uSD card or eMMC module with eMMC-to-uSD adapter. We don't distinguish them since for PC, it's both `SD card`.
+It's always a good idea to backup your ROCK Pi 4's image on PC. Below the tutorial, we assume you use uSD card or eMMC module with an eMMC-to-uSD adapter. We don't distinguish them since for PC, it's both `SD card`.
 == Using Rockpi4 ==
@@ Line 34: / Line 34: @@
 == Using OSX ==
-Insert the SD Card into a card reader on your Mac.  Open Terminal and enter the following command to locate your SD Card:
+Insert the SD card into a card reader on your Mac.  Open Terminal and enter the following command to locate your SD Card:
      diskutil list

@@ Line 9: / Line 9: @@
 == Using Rockpi4 ==
-Now we have a [https://rock.sh/rockpi-toolkit rockpi-backup.sh] that runs directly on Rockpi4, which backs up your system, and the backup file size is the actual space used. For more information, please refer to https://rock.sh/rockpi-toolkit/
+Now we have a [https://rock.sh/rockpi-toolkit rockpi-backup.sh] that '''runs directly on Rockpi4''', which backs up your system, and the backup file size is the '''actual space used'''.
 [[File:Rockpi-backup.png | 600px ]]
 == Using Windows ==

← Older revision		Revision as of 03:50, 25 July 2019
Line 6:		Line 6:

	It's always a good ideas to backup your ROCK Pi 4's image on PC. Below tutorial we assume you use uSD card or eMMC module with eMMC-to-uSD adapter. We don't distinguish them since for PC, it's both `SD card`.		It's always a good ideas to backup your ROCK Pi 4's image on PC. Below tutorial we assume you use uSD card or eMMC module with eMMC-to-uSD adapter. We don't distinguish them since for PC, it's both `SD card`.
		+
		+	== Using Rockpi4 ==
		+
		+	Now we have a [https://rock.sh/rockpi-toolkit rockpi-backup.sh] that runs directly on Rockpi4, which backs up your system, and the backup file size is the actual space used. For more information, please refer to https://rock.sh/rockpi-toolkit/
		+
		+	[[File:Rockpi-backup.png \| 600px ]]
		+

	== Using Windows ==		== Using Windows ==

← Older revision		Revision as of 02:53, 8 April 2019
Line 1:		Line 1:
		+	{{rockpi4_header}}
		+
		+	{{Languages\|rockpi4/backup}}
		+
		+	[[rockpi4 \| ROCK Pi 4]] > [[rockpi4/backup \| Backup and Restore uSD card or eMMC module]]

	It's always a good ideas to backup your ROCK Pi 4's image on PC. Below tutorial we assume you use uSD card or eMMC module with eMMC-to-uSD adapter. We don't distinguish them since for PC, it's both `SD card`.		It's always a good ideas to backup your ROCK Pi 4's image on PC. Below tutorial we assume you use uSD card or eMMC module with eMMC-to-uSD adapter. We don't distinguish them since for PC, it's both `SD card`.

@@ Line 1: / Line 1: @@
-{{rockpi4_header}}
+#redirect [[Rock4/backup]]
-−
-{{Languages|rockpi4/backup}}
-−
-    [[rockpi4 | ROCK Pi 4]] > [[rockpi4/backup | Backup and Restore uSD card or eMMC module]]
-−
-It's always a good idea to backup your ROCK Pi 4's image on PC. Below the tutorial, we assume you use uSD card or eMMC module with an eMMC-to-uSD adapter. We don't distinguish them since for PC, it's both `SD card`.
-−
-== Using Rockpi4 ==
-−
-Now we have a [https://rock.sh/rockpi-toolkit rockpi-backup.sh] that '''runs directly on Rockpi4''', which backs up your system, and the backup file size is the '''actual space used'''.
-−
-[[File:Rockpi-backup.png | 600px ]]
-−
-For more information, please refer to https://rock.sh/rockpi-toolkit/
-−
-== Using Windows ==
-−
-One of the best tools to backup and restore SD cards is '''Win32 Disk Imager'''.  Download it from [http://sourceforge.net/projects/win32diskimager/files/latest/download SourceForge] and install it.  BEFORE starting the software, insert your SD card into the SD card reader on your PC.  Often this will open the file explorer showing you the contents of part of your SD card, which should look something like this:
-−
-[[File:Sdbackup1.png]]
-−
-This is not the whole of the contents of your SD card - only part of the card contents is readable by Windows.  The rest is not readable by your PC.
-−
-Once you open Win32 Disk Imager, use the blue folder icon to choose the location and the name of the backup you want to take, and then choose the drive letter for your SD card.
-−
-−
-[[File:Sdbackup2.png]]
-−
-Click on the Read button.  The card will then be backed up to your PC.
-−
-If you have a problem with your SD card and it becomes unreadable for any reason (e.g. it becomes corrupted), just follow the above instructions, choosing the image you created as the image file, and click on Write to write it back to the SD card.  In fact, you can write it back to another SD card of the same size, giving you an exact duplicate.
-−
-== Using OSX ==
-−
-Insert the SD card into a card reader on your Mac.  Open Terminal and enter the following command to locate your SD Card:
-−
-    diskutil list
-−
-All your disks will be listed, and will look something like below:
-−
-[[File:Sdbackup3.png]]
-−
-Look for your SD card by looking for a disk of the right size and name. In the above example, the SD Card is /dev/disk1.
-−
-Next, in Terminal, enter the following command to create a disc image (.dmg) of your SD Card in your home directory.
-−
-    sudo dd if=/dev/disk1 of=~/SDCardBackup.dmg
-−
-Wait until the SD card has been completely read; the command does not show any feedback, so wait for the command prompt to reappear in the terminal window once it is complete.
-−
-Again, if you corrupt your SD card or need to make a copy at any time, you can restore it by following the same approach as above to locate your SD card.  Before you can write to the card you have to 'unmount' it so that the operating system does not try to write to it at the same time.  Use the following in the Terminal:
-−
-    diskutil unmountDisk /dev/disk1
-−
-Then use the this to write the image back to the SD card:
-−
-    sudo dd if=~/SDCardBackup.dmg of=/dev/disk1
-−
-Once it has finished writing the image to the SD card, you can remove it from your Mac using:
-−
-    sudo diskutil eject /dev/rdisk3
-−
-== Using Linux ==
-Before inserting the SD card into the reader on your Linux PC, run the following command to find out which devices are currently available:
-−
-    df -h
-−
-Which will return something like this:
-<pre>
-Filesystem 1K-blocks Used Available Use% Mounted on
-rootfs 29834204 15679020 12892692 55% /
-/dev/root 29834204 15679020 12892692 55% /
-devtmpfs 437856 0 437856 0% /dev
-tmpfs 88432 284 88148 1% /run
-tmpfs 5120 0 5120 0% /run/lock
-tmpfs 176860 0 176860 0% /run/shm
-/dev/mmcblk0p1 57288 14752 42536 26% /boot
-Insert the SD card into a card reader and use the same df -h command to find out what is now available:
-−
-Filesystem 1K-blocks Used Available Use% Mounted on
-rootfs 29834204 15679020 12892692 55% /
-/dev/root 29834204 15679020 12892692 55% /
-devtmpfs 437856 0 437856 0% /dev
-tmpfs 88432 284 88148 1% /run
-tmpfs 5120 0 5120 0% /run/lock
-tmpfs 176860 0 176860 0% /run/shm
-/dev/mmcblk0p1 57288 14752 42536 26% /boot
-/dev/sda5 57288 9920 47368 18% /media/boot
-/dev/sda6 6420000 2549088 3526652 42% /media/41cd5baa-7a62-4706-b8e8-02c43ccee8d9
-</pre>
-−
-The new device that wasn't there last time is your SD card.
-−
-The left column gives the device name of your SD card, and will look like '/dev/mmcblk0p1' or '/dev/sdb1'. The last part ('p1' or '1') is the partition number, but you want to use the whole SD card, so you need to remove that part from the name leaving '/dev/mmcblk0' or '/dev/sdb' as the disk you want to read from.
-−
-Open a terminal window and use the following to backup your SD card:
-−
-    sudo dd if=/dev/sdb of=~/SDCardBackup.img status=progress
-−
-The dd command will show the progress, you just need to wait until the command prompt re-appears.
-−
-To restore the image, do exactly the same again to discover which device is your SD card.  As with the Mac, you need to unmount it first, but this time you need to use the partition number as well (the 'p1' or '1' after the device name).  If there is more than one partition on the device, you will need to repeat the umount command for all partition numbers.  For example, if the df -h shows that there are two partitions on the SD card, you will need to unmount both of them:
-−
-    sudo umount /dev/sdb1
-    sudo umount /dev/sdb2
-−
-Now you are able to write the original image to the SD drive:
-−
-    sudo dd bs=4M if=~/SDCardBackup.img of=/dev/sdb status=progress
-−
-The bs=4M option sets the 'block size' on the SD card to 4Meg.  If you get any warnings, then change this to 1M instead, but that will take a little longer to write.
-−
-Again, wait while it completes.  Before ejecting the SD card, make sure that your Linux PC has completed writing to it using the command:
-−
-    sudo sync