Rockpi4/Core/Fuhai - Revision history

Jack-ma: /* Hardware Resource */

2021-11-16T13:31:09Z

‎Hardware Resource

2021-11-16T13:29:56Z

‎2. Get System Image

2021-10-26T13:13:42Z

‎3.1.1 Boot Fuhai to Maskrom mode

2021-10-26T13:06:32Z

‎1. Essential Things

2021-10-26T13:06:14Z

‎1. Essential Things

2021-10-26T10:27:40Z

2021-10-26T10:03:14Z

‎3.1.2. Use rkdeveloptool to flash image

2021-10-26T10:02:20Z

‎2. Get System Image

2021-10-26T09:56:58Z

2021-08-17T09:39:13Z

‎Features

@@ Line 51: / Line 51: @@
 == Hardware Resource ==
-* Fuhai carrier board schematic
+* [https://dl.radxa.com/rockpi4/core/hw/rockpi4_core_evb_fuhaii_v1.1_20210603_sch.pdf Fuhai carrier board schematic]
-* Fuhai components position reference
+* [https://dl.radxa.com/rockpi4/core/hw/rockpi4_core_evb_fuhai_v1.1_20210603_ref.pdf Fuhai components position reference]
 * Fuhai Datasheet
 * Fuhai 2D dimension

@@ Line 73: / Line 73: @@
 === 2. Get System Image ===
-* See [https://github.com/radxa/rock-pi-4-images-released/releases Fuhai Ubuntu/Debian]
+* See [https://github.com/radxa/rock-pi-4-images-released/releases Fuhai Ubuntu/Debian Image release]
-* See [https://github.com/radxa/manifests/releases Fuhai Android]
+* See [https://github.com/radxa/manifests/releases Fuhai Android Image release]
 === 3. Flash System Image ===

@@ Line 85: / Line 85: @@
 * Plug DC 12V Adapter to turn on the Green Power Led.
-* Keep pressing Maskrom Key.
+* Press and hold the Maskrom Key.
-* Plug one USB Male A to Male C cable, which also connect to PC, to Type-C port. You would see Red LED becomes red.
+* Plug one USB Male A to Male C cable, which also connect to PC, to Type-C port. You would see Red LED is on, now the system boots
 * Release Maskrom Key

@@ Line 63: / Line 63: @@
 * Power supply
-** DC 12V/2A or higher Adapter: the inside diameter of the plug is 2.5mm，the outer diameter of the plug is 5.5mm.The positive electrode of the DC plug is in the inside, and the negative pole is outside.
+** DC 12V/2A or higher adapter: the inside diameter of the plug is 2.5mm，the outer diameter of the plug is 5.5mm.The positive electrode of the DC plug is in the inside, and the negative pole is outside.
 * USB to TTL serial cable

@@ Line 63: / Line 63: @@
 * Power supply
-** DC 12V Adapter
+** DC 12V/2A or higher Adapter: the inside diameter of the plug is 2.5mm，the outer diameter of the plug is 5.5mm.The positive electrode of the DC plug is in the inside, and the negative pole is outside.
 * USB to TTL serial cable

@@ Line 1: / Line 1: @@
 {{rockpi4_header}}
 {{Languages|rockpi4/Core}}
      [[rockpi4 | ROCK Pi 4]] > [[rockpi4/Core | ROCK Pi 4 Core SoM]] > [[rockpi4/Core/Fuhai | Fuhai EVB]]
@@ Line 52: / Line 50: @@
 |}
-== Fuhai Hardware Revisions ==
+== Hardware Resource ==
-=== V1.1 ===
+* Fuhai carrier board schematic
 ==Getting Started==

@@ Line 90: / Line 90: @@
 ===== 3.1.2. Use rkdeveloptool to flash image =====
-Please refer to  [[rockpi4/dev/usb-install | Install from USB OTG port]].
+Please refer to  [[rockpi4/dev/usb-install | USB OTG port]].
 === 4. Power on Fuhai ===

← Older revision		Revision as of 10:02, 26 October 2021
Line 73:		Line 73:

	* See [https://github.com/radxa/rock-pi-4-images-released/releases Fuhai Ubuntu/Debian]		* See [https://github.com/radxa/rock-pi-4-images-released/releases Fuhai Ubuntu/Debian]
		+	* See [https://github.com/radxa/manifests/releases Fuhai Android]

	=== 3. Flash System Image ===		=== 3. Flash System Image ===

@@ Line 6: / Line 6: @@
      [[rockpi4 | ROCK Pi 4]] > [[rockpi4/Core | ROCK Pi 4 Core SoM]] > [[rockpi4/Core/Fuhai | Fuhai EVB]]
-== Fuhai EVB ==
+= Fuhai EVB =
 [[File:PI_4_CORE_BASE_01-V1.1.jpg]]
@@ Line 51: / Line 51: @@
 | PCB Layer || 6 layers
 |}

← Older revision		Revision as of 09:39, 17 August 2021
Line 10:		Line 10:

	== Features ==		== Features ==
		+
		+	{\| class="wikitable"
		+	\|-
		+	\| SoC \|\| Rockchip RK3399
		+	\|-
		+	\| CPU \|\| Dual Cortex-A72@1.8GHz, Quad Cortext-A35@1.4GHz
		+	\|-
		+	\| GPU \|\| Mali T860MP4
		+	\|-
		+	\| RAM \|\| 4GB LPDDR4
		+	\|-
		+	\| Storage \|\| - 32GB eMMC<br> - 1x SD card slot <br> - 1x M.2 M Key for NVMe SSD
		+	\|-
		+	\| Dispaly \|\| - 1x HDMI up to 4K x 2K@60HZ<br>- 1x eDP four lanes, up to 4Kx2K@60<br>- 1x MIPI four lanes up to 1920x1080@60<br>- 1x USB C, support DP Alt mode up to 4K x 2K@60HZ
		+	\|-
		+	\| Touch \|\| 6P connector for I2C touch panel
		+	\|-
		+	\| Audio \|\| - 3.5mm headphone jack with mic in<br> - 1x 4P speaker connector
		+	\|-
		+	\| Wireless \|\| - 1x M.2 E Key for sdio+uart WiFi module <br> - 1x Mini PCIe for 4G LET module
		+	\|-
		+	\| Ethernet \|\| 1000M Ethernet with optional PoE support
		+	\|-
		+	\| USB \|\| - 1x full function USB C<br>- 1x USB HOST 3.0<br>- 1x USB HOST 2.0
		+	\|-
		+	\| Camera \|\| 2x MIPI CSI, dual ISP, 1x max 13Mpx sensor or 2x 8M sensor
		+	\|-
		+	\| Battery \|\| Support 3.7V lion battery
		+	\|-
		+	\| Power \|\| 12V/2A
		+	\|-
		+	\| Operation Temperature \|\| 0~80 degree, optional wider temperature range RK3399K
		+	\|-
		+	\| '''Dimension''' \|\|
		+	\|-
		+	\| Form Factor \|\| 3.5 inch slim SBC
		+	\|-
		+	\| Size \|\| 150 * 100
		+	\|-
		+	\| PCB Layer \|\| 6 layers
		+	\|}