RockPro-px30 - Revision history

Stephen: /* Serial console */

2020-06-24T09:23:38Z

‎Serial console

2020-06-16T15:30:54Z

‎Install build tools

2020-06-16T15:28:42Z

2020-06-16T15:25:18Z

‎Get the source code

2020-06-16T15:07:51Z

‎Default user account

2020-06-16T15:07:35Z

‎Serial console

2020-06-16T15:07:02Z

‎Default user account

2020-06-16T15:05:22Z

‎Pack U-Boot

2020-06-16T15:04:22Z

‎Get the source code

2020-06-16T09:21:53Z

← Older revision		Revision as of 09:23, 24 June 2020
Line 159:		Line 159:
	parity : none		parity : none
	flow control: none		flow control: none
		+
		+	Q1: While using debug serial console, there is system startup information on the screen, but the keyboard cannot be used to input text?
		+
		+	A1: One of the reason would be the wrong setting of the serial tool, such as the Hardware Flow Control, etc. Here we should disable the Hardware Flow Control.

@@ Line 36: / Line 36: @@
    sudo tar xvf gcc-linaro-7.3.1-2018.05-x86_64_aarch64-linux-gnu.tar.xz  -C /usr/local/
    sudo apt-get install gcc-aarch64-linux-gnu device-tree-compiler libncurses5 libncurses5-dev build-essential libssl-dev mtools
-   sudo apt-get install bc python dosfstools ruby-dev build-essential
+   sudo apt-get install bc python dosfstools ruby-dev
    sudo gem install fpm

@@ Line 31: / Line 31: @@
    git clone -b debian https://github.com/radxa/build.git
-=== Install toolchain from Linaro ===
+=== Install build tools ===
    wget https://releases.linaro.org/components/toolchain/binaries/7.3-2018.05/aarch64-linux-gnu/gcc-linaro-7.3.1-2018.05-x86_64_aarch64-linux-gnu.tar.xz
    sudo tar xvf gcc-linaro-7.3.1-2018.05-x86_64_aarch64-linux-gnu.tar.xz  -C /usr/local/
    export CROSS_COMPILE=/usr/local/gcc-linaro-7.3.1-2018.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
    export PATH=/usr/local/gcc-linaro-7.3.1-2018.05-x86_64_aarch64-linux-gnu/bin:$PATH
-Check if Linaro toolchain is the default choice:
+Execute the following command.
-   which aarch64-linux-gnu-gcc
+   source ~/.bashrc
-  /usr/local/gcc-linaro-7.3.1-2018.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-gcc
-=== Install other build tools ===
+Check if Linaro toolchain is the default choice.
-   sudo apt-get install gcc-aarch64-linux-gnu device-tree-compiler libncurses5 libncurses5-dev build-essential libssl-dev mtools
+   which aarch64-linux-gnu-gcc
-  sudo apt-get install bc python dosfstools
+  /usr/local/gcc-linaro-7.3.1-2018.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-gcc
 === Build U-Boot ===

@@ Line 12: / Line 12: @@
 Create top directory, rockchip-bsp.
-   mkdir rockchip-bsp
+   mkdir ~/rockchip-bsp
 u-boot. The second stage bootloader.

@@ Line 136: / Line 136: @@
 Non-root User:
    User Name : rock
    Password  : rock

@@ Line 147: / Line 147: @@
 The default serial setting of serial tool on Host PC:
-    baudrate: 1500000
+  baudrate: 1500000
-    data bit: 8
+  data bit: 8
-    stop bit: 1
+  stop bit: 1
-    parity  : none
+  parity  : none
-    flow control: none
+  flow control: none

@@ Line 58: / Line 58: @@
 === Pack U-Boot ===
-   ./build/pack-uboot.sh rockpropx30
+   ./build/pack-uboot.sh -b rockpropx30
 The generated packages will be copied to out/packages directory.

@@ Line 24: / Line 24: @@
 rkbin. Prebuilt Rockchip binaries, include first stage loader and ATF(Arm Trustzone Firmware).
-   git clone -b stable-4.4-px30 debian https://github.com/radxa/rkbin.git
+   git clone -b stable-4.4-px30 https://github.com/radxa/rkbin.git
 build. Some script files and configuration files for building u-boot, kernel and rootfs.

← Older revision		Revision as of 09:21, 16 June 2020
Line 130:		Line 130:

	Now the device should boot from eMMC now. The first boot would take several minutes.		Now the device should boot from eMMC now. The first boot would take several minutes.
		+
		+	== Linux system ==
		+
		+	=== Default user account ===
		+
		+	Non-root User:
		+	User Name : rock
		+	Password : rock
		+
		+	=== Serial console ===
		+
		+	The u-boot console is ttyS2 with baud rate 1500000bps, date bit 8, stop bit 1, parity none.
		+
		+	The kernel console is ttyS1 with baud rate 1500000bps, date bit 8, stop bit 1, parity none.
		+
		+	The default serial setting of serial tool on Host PC:
		+
		+	baudrate: 1500000
		+	data bit: 8
		+	stop bit: 1
		+	parity : none
		+	flow control: none