Stephen: Created page with "{{rock5_header}} {{Languages|rock5/hardware/usb5_eMMC_reader}} ROCK 5 > Hardware > USB3 eMMC Reader..."

2022-06-19T09:37:50Z

Created page with "{{rock5_header}} {{Languages|rock5/hardware/usb5_eMMC_reader}} ROCK 5 > Hardware > USB3 eMMC Reader..."

New page

{{rock5_header}}
{{Languages|rock5/hardware/usb5_eMMC_reader}}

[[rock5 | ROCK 5]] > [[rock5/hardware | Hardware]] > [[rock5/hardware/usb3_eMMC_reader | USB3 eMMC Reader]]

== Introduction ==

https://i.ibb.co/W2rK0jh/usb3-emmc-reader.jpg

The eMMC reader is another accessory we designed for ourselves and the developers who need to write images on eMMC module frequently. It's just fast and reduces the image writing time a lot, much more handy than the eMMC to uSD adapter.

* High speed USB3.1 Gen2 GL3227E controller
* Support eMMC HS400 mode
* Dual mount for eMMC module
* Support ROCK Pi eMMC modules up to 128GB
* Compatible with Odroid/PINE64 eMMC module
* Support Linux/Windows/MacOS
* Support GPT partition table and firmware

Real life usage example:

<pre>
time sh -c 'sudo dd if=rockpi4b-ubuntu-bionic-minimal-20190104_2101-gpt.img of=/dev/sdd bs=4M status=progress && sync'

2155872256 bytes (2.2 GB, 2.0 GiB) copied, 6.0156 s, 358 MB/s
544+1 records in
544+1 records out
2282749952 bytes (2.3 GB, 2.1 GiB) copied, 11.966 s, 191 MB/s

real 0m11.989s
user 0m0.008s
sys 0m2.484s
</pre>

== See also ==
* [[rock5/hardware/emmc |eMMC module]]

Rock5/hardware/usb3 eMMC reader - Revision history

Stephen: Created page with "{{rock5_header}} {{Languages|rock5/hardware/usb5_eMMC_reader}} ROCK 5 > Hardware > USB3 eMMC Reader..."