Rock5/hardware/camera/ - Revision history

Stephen: /* Software configuration */

2022-09-29T09:50:53Z

‎Software configuration

Stephen at 06:22, 8 September 2022

2022-09-08T06:22:08Z

Curry: /* Radxa Camera 4K */

2022-09-08T06:14:15Z

‎Radxa Camera 4K

Stephen at 06:28, 21 July 2022

2022-07-21T06:28:42Z

Stephen: Created page with "{{rock5_header}} {{Languages|rock5/hardware/camera}} ROCK 5 > Hardware > Camera module === MIPI Camera ===..."

2022-06-19T09:47:06Z

Created page with "{{rock5_header}} {{Languages|rock5/hardware/camera}} ROCK 5 > Hardware > Camera module === MIPI Camera ===..."

New page

{{rock5_header}}
{{Languages|rock5/hardware/camera}}

[[rock5 | ROCK 5]] > [[rock5/hardware | Hardware]] > [[rock5/hardware/camera/ | Camera module]]

=== MIPI Camera ===

=== USB Camera ===

=== Troubleshooting ===

* Post your issue on the forum: https://forum.radxa.com/c/rock5

@@ Line 14: / Line 14: @@
 ==== Software configuration ====
-Add one line to file /boot/config.txt. Like  this.
+* Add one line to file /boot/config.txt. Like  this.
   dtoverlay=rock-5ab-camera-imx415
-And then execute command.
+* And then execute command.
-  update_extlinux.sh
+  # update_extlinux.sh
-Reboot the device, you would see devices /dev/video0 to /dev/video19 are created.
+* Reboot the device, you would see devices /dev/video0 to /dev/video19 are created.
-Test command.
+* Start rkaiq camera preview.
- gst-launch-1.0 v4l2src device=/dev/video0 io-mode=4 ! videoconvert ! video/x-raw,format=NV12,width=1920,height=1080 ! jpegenc ! multifilesink location=%d.jpg
+Execute the following command with root user in terminal on desktop.
-You would see generated pictures.
+ $ sudo su
 == USB Camera ==

@@ Line 11: / Line 11: @@
 [[File:Rock-5b-radxa-camera-4k.jpeg | 400px]]
 ==== Software configuration ====
-Find rock-5ab-camera-imx415.dtbo according to the following path
+Add one line to file /boot/config.txt. Like  this.
-        root@rock-5b:/boot/dtbs/5.10.66-20-rockchip-g0cdf37b755fe/rockchip/overlay#
-Edit extlinux.conf in root mode
+ dtoverlay=rock-5ab-camera-imx415
-        root@rock-5b:/boot/extlinux# vi extlinux.conf
-Mount rock-5ab-camera-imx415.dtbo to fdtoverlays
+And then execute command.
-        fdtoverlays  /dtbs/5.10.66-20-rockchip-g0cdf37b755fe/rockchip/overlay/rock-5ab-camera-imx415.dtbo
-==== Verify command（Reference） ====
+Reboot the device, you would see devices /dev/video0 to /dev/video19 are created.
-Camera capture command
-        gst-launch-1.0 v4l2src device=/dev/video0 io-mode=4 ! videoconvert ! video/x-raw,format=NV12,width=1920,height=1080 ! jpegenc ! multifilesink location=%d.jpg
-== USB Camera ==
+Test command.

← Older revision		Revision as of 06:14, 8 September 2022
Line 12:		Line 12:
	[[File:Rock-5b-radxa-camera-4k.jpeg \| 400px]]		[[File:Rock-5b-radxa-camera-4k.jpeg \| 400px]]

		+
		+	==== Software configuration ====
		+
		+	Find rock-5ab-camera-imx415.dtbo according to the following path
		+	root@rock-5b:/boot/dtbs/5.10.66-20-rockchip-g0cdf37b755fe/rockchip/overlay#
		+
		+	Edit extlinux.conf in root mode
		+	root@rock-5b:/boot/extlinux# vi extlinux.conf
		+
		+	Mount rock-5ab-camera-imx415.dtbo to fdtoverlays
		+	fdtoverlays /dtbs/5.10.66-20-rockchip-g0cdf37b755fe/rockchip/overlay/rock-5ab-camera-imx415.dtbo
		+
		+
		+	==== Verify command（Reference） ====
		+	Camera capture command
		+	gst-launch-1.0 v4l2src device=/dev/video0 io-mode=4 ! videoconvert ! video/x-raw,format=NV12,width=1920,height=1080 ! jpegenc ! multifilesink location=%d.jpg

	== USB Camera ==		== USB Camera ==

@@ Line 4: / Line 4: @@
      [[rock5 | ROCK 5]] > [[rock5/hardware | Hardware]] > [[rock5/hardware/camera/ | Camera module]]
-=== MIPI Camera ===
+== MIPI Camera ==
-=== USB Camera ===
+[[File:Rock-5b-radxa-camera-4k.jpeg | 400px]]
-=== Troubleshooting ===
 * Post your issue on the forum: https://forum.radxa.com/c/rock5