Rock5/guide/build-u-boot-on-5b - Revision history

Hipboi at 10:30, 18 July 2023

2023-07-18T10:30:21Z

Milas at 15:41, 20 February 2023

2023-02-20T15:41:34Z

Milas: /* Write u-boot images */ fix emmc/sd card paths & add warning

2023-02-20T15:14:12Z

‎Write u-boot images: fix emmc/sd card paths & add warning

Stephen at 03:28, 28 October 2022

2022-10-28T03:28:03Z

Feng: /* Write u-boot */

2022-10-26T02:47:42Z

‎Write u-boot

Feng at 10:38, 24 October 2022

2022-10-24T10:38:06Z

Stephen: Created page with "{{rock5_header}} {{Languages|rock5/guide/build-u-boot-on-5b}} ROCK 5 > Guide > Build U-Boot on ROCK 5B..."

2022-10-21T02:13:49Z

Created page with "{{rock5_header}} {{Languages|rock5/guide/build-u-boot-on-5b}} ROCK 5 > Guide > Build U-Boot on ROCK 5B..."

New page

{{rock5_header}}
{{Languages|rock5/guide/build-u-boot-on-5b}}

[[rock5 | ROCK 5]] > [[rock5/guide | Guide]] > [[rock5/guide/build-u-boot-on-5b | Build U-Boot on ROCK 5B]]

== Build U-Boot on ROCK 5B ==

@@ Line 4: / Line 4: @@
      [[rock5 | ROCK 5]] > [[rock5/guide | Guide]] > [[rock5/guide/build-u-boot-on-5b | Build U-Boot on ROCK 5B]]
-== Build U-Boot on Rock 5B ==
+== Build Vendor U-Boot on Rock 5B ==
-U-Boot can be compiled and flashed on the Rock 5B device from the Linux distribution of your choice.
+Vendor U-Boot can be compiled and flashed on the Rock 5B device from the Linux distribution. For mainline U-boot, please check [https://gitlab.collabora.com/hardware-enablement/rockchip-3588/notes-for-rockchip-3588/-/blob/main/upstream_uboot.md collabora's upstream uboot note]
 === Preparation ===

@@ Line 4: / Line 4: @@
      [[rock5 | ROCK 5]] > [[rock5/guide | Guide]] > [[rock5/guide/build-u-boot-on-5b | Build U-Boot on ROCK 5B]]
-== Build U-Boot on ROCK 5B ==
+== Build U-Boot on Rock 5B ==
-Below is the instructions of how to build u-boot image for ROCK 5 on rock5b board.
+=== Preparation ===
-Available boards:
+. Install the necessary build dependencies:
-−
-* ROCK 5B
-−
-=== Install essential pacakges ===
   sudo apt-get update
   sudo apt-get install -y git  device-tree-compiler libncurses5 libncurses5-dev build-essential libssl-dev mtools bc python dosfstools flex bison
-=== Get the source code ===
+If you're not using Debian or Ubuntu, you'll need to install the equivalent packages for your distribution.
-Clone the source code
+. Set up your workspace and get the source code from the Radxa Git repositories:
   mkdir ~/rk3588-sdk && cd ~/rk3588-sdk
@@ Line 28: / Line 25: @@
 And you will get
-  build   rkbin u-boot
+  /~/rk3588-sdk/
-Directories usage introductions:
+* <code>~/rk3588-sdk/build/</code>: Radxa helper script files and configuration files for building U-Boot, Linux kernel and rootfs.
-* build:
+=== Build U-Boot ===
-** Some script files and configuration files for building u-boot, kernel and rootfs.
-* rkbin:
-** Prebuilt Rockchip binaries, include first stage loader and ATF(Arm Trustzone Firmware).
-* u-boot:
-** u-boot as the second stage bootloader
-−
-=== Build u-boot ===
-−
-Need to checkout branch to '''stable-5.10-rock5'''.
-−
-Build u-boot with default '''rock-5b-rk3588_defconfig'''.
   cd ~/rk3588-sdk
   ./build/mk-uboot.sh rk3588-rock-5b     #For ROCK 5B
-The generated images will be copied to out/u-boot folder
+After a successful build, the <code>~/rk3588-sdk/out/u-boot</code> directory will be populated
-−
- ls out/u-boot/
- idbloader.img  rk3588_spl_loader_v1.07.111.bin  spi  u-boot.itb
-−
-=== Write u-boot images ===
-−
-. After a successful build, the <code>~/rk3588-sdk/out/u-boot</code> directory will be populated
   ~/rk3588-sdk/out/u-boot
   ├── idbloader.img
@@ Line 63: / Line 48: @@
   └── u-boot.itb
-. Flash U-Boot to your desired storage device
+=== Flash U-Boot ===
-⚠️ Some versions of the Rock 5B kernel have the eMMC and SD Card devices swapped
+Note that [[Rock5/downloads | flashable OS images]] already include U-Boot, so manually flashing U-Boot is not necessary for eMMC or SD Card installs.
-ℹ️ Booting from an NVMe device requires flashing U-Boot to SPI - see [[rock5/guide/spi-nvme-boot | SPI NVMe Boot Guide]]
+The following commands assume they are run from the <code>~/rk3588-sdk</code> directory.
-The following commands should be run from the <code>~/rk3588-sdk</code> directory.
+===== eMMC =====
   sudo dd if=./out/u-boot/idbloader.img of=/dev/mmcblk0 bs=512 seek=64
   sudo dd if=./out/u-boot/u-boot.itb of=/dev/mmcblk0 bs=512 seek=16384
-* sdcard
+===== SD Card =====
   sudo dd if=./out/u-boot/idbloader.img of=/dev/mmcblk1 bs=512 seek=64
   sudo dd if=./out/u-boot/u-boot.itb of=/dev/mmcblk1 bs=512 seek=16384
-* spi nor
+===== SPI NOR =====
   sudo dd if=./out/u-boot/idbloader.img of=/dev/mtdblock0 bs=512 seek=64
   sudo dd if=./out/u-boot/u-boot.itb of=/dev/mtdblock0 bs=512 seek=16384
-=== FAQs ===
+====== Alternative Method ======
 === Troubleshooting ===
 Check [[rock5/FAQs |ROCK 5 FAQs]] first, if it doesn't help, start a new post on the forum https://forum.radxa.com/c/rock5.

@@ Line 55: / Line 55: @@
 === Write u-boot images ===
-. you should check file in out/u-boot should be like this:
+. After a successful build, the <code>~/rk3588-sdk/out/u-boot</code> directory will be populated
- ls out/u-boot/
+. Flash U-Boot to your desired storage device
- idbloader.img  rk3588_spl_loader_v1.07.111.bin  spi  u-boot.itb
 * emmc
-  sudo dd if=./idbloader.img of=/dev/mmcblk1 bs=512 seek=64
+  sudo dd if=./out/u-boot/idbloader.img of=/dev/mmcblk0 bs=512 seek=64
-  sudo dd if=./u-boot.itb of=/dev/mmcblk1 bs=512 seek=16384
+  sudo dd if=./out/u-boot/u-boot.itb of=/dev/mmcblk0 bs=512 seek=16384
 * sdcard
-  sudo dd if=./idbloader.img of=/dev/mmcblk0 bs=512 seek=64
+  sudo dd if=./out/u-boot/idbloader.img of=/dev/mmcblk1 bs=512 seek=64
-  sudo dd if=./u-boot.itb of=/dev/mmcblk0 bs=512 seek=16384
+  sudo dd if=./out/u-boot/u-boot.itb of=/dev/mmcblk1 bs=512 seek=16384
 * spi nor
-  sudo dd if=./idbloader.img of=/dev/mtdblock0 bs=512 seek=64
+  sudo dd if=./out/u-boot/idbloader.img of=/dev/mtdblock0 bs=512 seek=64
-  sudo dd if=./u-boot.itb of=/dev/mtdblock0 bs=512 seek=16384
+  sudo dd if=./out/u-boot/u-boot.itb of=/dev/mtdblock0 bs=512 seek=16384
 === FAQs ===

@@ Line 5: / Line 5: @@
 == Build U-Boot on ROCK 5B ==
 Below is the instructions of how to build u-boot image for ROCK 5 on rock5b board.
@@ Line 13: / Line 12: @@
 * ROCK 5B
-==== Get the source code ====
+=== Install essential pacakges ===
-You need Git to get multiple git repositories to build the image.
+ sudo apt-get update
-Install Git if you don't have it.
+=== Get the source code ===
-−
- sudo apt-get update
- sudo apt-get install git
 Clone the source code
@@ Line 42: / Line 39: @@
 ** u-boot as the second stage bootloader
 === Build u-boot ===
-==== Install other build tools ====
-−
- sudo apt-get install device-tree-compiler libncurses5 libncurses5-dev build-essential libssl-dev mtools bc python dosfstools flex bison
-−
-==== Build u-boot ====
 Need to checkout branch to '''stable-5.10-rock5'''.
@@ Line 61: / Line 53: @@
   idbloader.img  rk3588_spl_loader_v1.07.111.bin  spi  u-boot.itb
-==== Write u-boot ====
+=== Write u-boot images ===
 . you should check file in out/u-boot should be like this:
@@ Line 81: / Line 73: @@
   sudo dd if=./u-boot.itb of=/dev/mtdblock0 bs=512 seek=16384
-==== FAQs ====
+=== FAQs ===
-==== Troubleshooting ====
+=== Troubleshooting ===
 Check [[rock5/FAQs |ROCK 5 FAQs]] first, if it doesn't help, start a new post on the forum https://forum.radxa.com/c/rock5.

@@ Line 69: / Line 69: @@
 . flash u-boot to you storage
-  sudo dd if=./idbloader.img of=/path/to/storage/device bs=512 seek=64
+* sdcard
-  sudo dd if=./u-boot.itb of=/path/to/storage/device bs=512 seek=16384
+  sudo dd if=./idbloader.img of=/dev/mmcblk0 bs=512 seek=64
 ==== FAQs ====

← Older revision		Revision as of 10:38, 24 October 2022
Line 5:		Line 5:

	== Build U-Boot on ROCK 5B ==		== Build U-Boot on ROCK 5B ==
		+	=== Rockchip Debian SDK ===
		+
		+	Below is the instructions of how to build u-boot image for ROCK 5 on rock5b board.
		+
		+	Available boards:
		+
		+	* ROCK 5B
		+
		+	==== Get the source code ====
		+
		+	You need Git to get multiple git repositories to build the image.
		+
		+	Install Git if you don't have it.
		+
		+	sudo apt-get update
		+	sudo apt-get install git
		+
		+	Clone the source code
		+
		+	mkdir ~/rk3588-sdk && cd ~/rk3588-sdk
		+	git clone -b stable-5.10-rock5 https://github.com/radxa/u-boot.git
		+	git clone -b master https://github.com/radxa/rkbin.git
		+	git clone -b debian https://github.com/radxa/build.git
		+
		+	And you will get
		+
		+	build rkbin u-boot
		+
		+	Directories usage introductions:
		+
		+	* build:
		+	** Some script files and configuration files for building u-boot, kernel and rootfs.
		+	* rkbin:
		+	** Prebuilt Rockchip binaries, include first stage loader and ATF(Arm Trustzone Firmware).
		+	* u-boot:
		+	** u-boot as the second stage bootloader
		+
		+
		+	==== Install other build tools ====
		+
		+	sudo apt-get install device-tree-compiler libncurses5 libncurses5-dev build-essential libssl-dev mtools bc python dosfstools flex bison
		+
		+	==== Build u-boot ====
		+
		+	Need to checkout branch to '''stable-5.10-rock5'''.
		+
		+	Build u-boot with default '''rock-5b-rk3588_defconfig'''.
		+
		+	cd ~/rk3588-sdk
		+	./build/mk-uboot.sh rk3588-rock-5b #For ROCK 5B
		+
		+	The generated images will be copied to out/u-boot folder
		+
		+	ls out/u-boot/
		+	idbloader.img rk3588_spl_loader_v1.07.111.bin spi u-boot.itb
		+
		+	==== Write u-boot ====
		+
		+	1. you should check file in out/u-boot should be like this:
		+
		+	ls out/u-boot/
		+	idbloader.img rk3588_spl_loader_v1.07.111.bin spi u-boot.itb
		+
		+	2. flash u-boot to you storage
		+
		+	sudo dd if=./idbloader.img of=/path/to/storage/device bs=512 seek=64
		+	sudo dd if=./u-boot.itb of=/path/to/storage/device bs=512 seek=16384
		+
		+
		+	==== FAQs ====
		+
		+	==== Troubleshooting ====
		+
		+	Check [[rock5/FAQs \|ROCK 5 FAQs]] first, if it doesn't help, start a new post on the forum https://forum.radxa.com/c/rock5.