Rock3/CM3p/e25/getting started - Revision history

Jack-ma: Redirected page to Rock3/CM/CM3I/E25/getting started

2022-05-21T09:52:57Z

Redirected page to Rock3/CM/CM3I/E25/getting started

Hipboi at 04:15, 17 April 2022

2022-04-17T04:15:12Z

Hipboi: /* Flash images */

2022-02-15T12:24:15Z

‎Flash images

Hipboi at 12:23, 15 February 2022

2022-02-15T12:23:33Z

Stephen: Created page with "{{rock3_header}} {{Languages|rock3/cm3p/e25}} ROCK 3 > ROCK 3 Compute Module Plus > Radxa E25 > Rock3/CM3p/e25/getting..."

2022-02-12T08:16:02Z

Created page with "{{rock3_header}} {{Languages|rock3/cm3p/e25}} ROCK 3 > ROCK 3 Compute Module Plus > Radxa E25 > Rock3/CM3p/e25/getting..."

New page

{{rock3_header}}
{{Languages|rock3/cm3p/e25}}

[[rock3 | ROCK 3]] > [[rock3/CM3p | ROCK 3 Compute Module Plus]] > [[Rock3/CM3p/e25 | Radxa E25]] > [[Rock3/CM3p/e25/getting_started | Getting started]]

__TOC__

Radxa E25 is an application board based on the [[rock3/CM3p | ROCK3 Compute Module Plus(CM3+)]] for networking applications.

[[File:Radxa_e25.png | 500px ]]

== What you need ==

=== Necessary ===
* Radxa E25

* One of the Storage media below:
** microSD, larger than 8GB.
** eMMC, larger than 8GB.

* Power supply
** option 1: Radxa E25 is powered by Type-C port. Input voltage is '''5V only'''.
** option 2: DC 5V on the 4-pin header

*USB Male A to Male A cable
**If you want write image on ROCK 3 from USB OTG port or use fastboot/adb commands you need an USB Male A to Male A cable to connect ROCK 3 and PC.

=== Optional ===
* microSD Card Reader
** For flashing the image into microSD Card

* USB to TTL serial cable
** This is needed for serial console.

* Ethernet cable
** Radxa E25 supports Internet access via WIFI or Ethernet.
** An Ethernet cable is used to connect your Radxa E25 to a local network and the Internet.

== Features ==

{| class="wikitable"
! Model
! colspan="1" width=80% | Radxa E25
|-
!SoC CPU GPU NPU
| colspan="2" | '''RK3568''' Quad-core Cortex-A55, freqency 2Ghz 
Mali G52 
0.8TOPS NPU
|-
! Memory
| colspan="2" | 1GB, 2GB, 4GB or 8GB LPDDR4 (depending on SoM variant)
|-
! Storage
| colspan="2" | eMMC (8/16/32/64/128GB) μSD card (μSD slot supports up to 128 GB μSD card) one SPI Nor Flash one EEPROM
|-
! Wireless
| colspan="2" | Optional wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless. Bluetooth 5.0, BLE with external antenna (depending on SoM variant).
|-
! USB
| colspan="2" | USB 3.0 OTG X1
|-
! Ethernet
| colspan="2" | 2.5GbE LAN X2
|-
! IO
| colspan="2" | 10-pin expansion header
|-
! LED
| colspan="2" | RGB LED
|-
! Key
| colspan="2" | Power Key X1 Recovery Key X1/ Maskrom Key X1
|-
! Power
| colspan="2" | USB Type-C DC 5V DC 5V on 4-pin header
|-
! Size
| colspan="2" | 2.5x2.2 inch(70x75mm)
|}

== Resource ==

==== General purpose input-output (GPIO) connector ====

Check [[ rock3/CM3p/e25/GPIO | E25 GPIO]].

== System images and usage ==

Get your favorite system images from [[rock3/downloads | Radxa E25 Downloads]].

And check the features of [[rock3/Ubuntu | Ubuntu]] or [[rock3/Debian | Debian]].

== Flash images ==

Radxa E25 supports two boot methods including booting from eMMC and booting from MicroSD.
Select one of the following methods.

* [[rock3/installusb-install-radxa-e25 | Install to eMMC from USB port (Radxa E25) ]]
* [[rock3/install/microSD | Install on MicroSD]]

== Troubleshooting ==

Check [[rock3/FAQs |ROCK 3 FAQs]] first, if it doesn't help, start a new post on the forum https://forum.radxa.com/c/rock3.

@@ Line 1: / Line 1: @@
-{{rock3_header}}
+#redirect [[rock3/CM/CM3I/E25/getting_started]]
-{{Languages|rock3/cm3p/e25}}
-−
-    [[rock3 | ROCK 3]] > [[rock3/CM3p | ROCK 3 Compute Module Industrial]] > [[Rock3/CM3p/e25 | Radxa E25]] > [[Rock3/CM3p/e25/getting_started | Getting started]]
-−
-__TOC__
-−
-Radxa E25 is an application board based on the  [[rock3/CM3p | ROCK3 Compute Module Industrial(CM3i)]] for networking applications.
-−
-== What you need ==
-−
-=== Necessary ===
-* Radxa E25 Carrier Board
-* CM3P any variant
-−
-* One of the Storage media below:
-** microSD, larger than 8GB.
-−
-* Power supply
-** option 1: Radxa E25 is powered by Type-C port. Input voltage is '''5V only'''.
-** option 2: DC 5V on the 4-pin header
-−
-*USB Male A to Male A cable
-**If you want write image on ROCK 3 from USB OTG port or use fastboot/adb commands you need an USB Male A to Male A cable to connect E25 and PC.
-−
-* microSD Card Reader
-** For flashing the image into microSD Card
-−
-*  Ethernet cable
-** Radxa E25 supports Internet access via WIFI or Ethernet.
-** An Ethernet cable is used to connect your Radxa E25 to a local network and  the Internet.
-−
-=== Optional ===
-* mini PCIe WiFi cards
-** example model: DR900VX
-* mini PCIe 4G/5G cellular card
-** example model: Quectel RG200,  Quectel EC25
-* M.2 B Key LTE module 3042
-** example model:  Quectel EM05
-* M.2 SATA SSD 2242
-** example model: Lenovo M.2 2242 SATA SSD
-== Features ==
-−
-{| class="wikitable"
-! Model
-! colspan="1" width=80% | Radxa E25
-|-
-!SoC<br><br>CPU<br>GPU<br>NPU
-| colspan="2" | '''RK3568''' <br><br>Quad-core Cortex-A55, freqency 2Ghz<br>
-Mali G52<br>
-.8TOPS NPU
-|-
-! Memory
-| colspan="2" | 1GB, 2GB, 4GB or 8GB LPDDR4 (depending on SoM variant)
-|-
-! Storage
-| colspan="2" | eMMC (8/16/32/64/128GB)<br>μSD card (μSD slot supports up to 128 GB μSD card)<br>one SPI Nor Flash<br>one EEPROM
-|-
-! Wireless
-| colspan="2" | Optional wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless.<br>Bluetooth 5.0, BLE with external antenna (depending on SoM variant).
-|-
-! USB
-| colspan="2" | USB 3.0 OTG X1
-|-
-! Ethernet
-| colspan="2" | 2.5GbE LAN X2
-|-
-! IO
-| colspan="2" | 10-pin expansion header
-|-
-! LED
-| colspan="2" | RGB LED
-|-
-! Key
-| colspan="2" | Power Key X1<br>Recovery Key X1/<br>Maskrom Key X1
-|-
-! Power
-| colspan="2" | USB Type-C DC 5V<br> DC 5V on 4-pin header
-|-
-! Size
-| colspan="2" | 2.5x2.2 inch(70x75mm)
-|}
-−
-== Resource ==
-−
-==== <span id="gpio">General purpose input-output (GPIO) connector</span> ====
-−
-Check [[ rock3/CM3p/e25/GPIO | E25 GPIO]].
-−
-== System images and usage ==
-−
-Get your favorite system images from [[rock3/downloads | Radxa E25 Downloads]].
-−
-And check the features of [[rock3/Ubuntu | Ubuntu]] or [[rock3/Debian | Debian]].
-−
-== Install images ==
-−
-Radxa E25 supports two boot methods including booting from eMMC and booting from MicroSD.
-Select one of the following methods.
-−
-* [[rock3/installusb-install-radxa-e25 | Install to eMMC from USB port (Radxa E25) ]]
-* [[rock3/install/microSD | Install on MicroSD]]
-−
-== Troubleshooting ==
-−
-Check [[rock3/FAQs |ROCK 3 FAQs]] first, if it doesn't help, start a new post on the forum https://forum.radxa.com/c/rock3.