Rock3/CM3/raspcm4io - Revision history

Stephen at 13:10, 12 February 2022

2022-02-12T13:10:56Z

Show changes

Stephen at 02:36, 27 November 2021

2021-11-27T02:36:08Z

Show changes

Stephen: /* Linux/macOS */

2021-11-19T02:19:00Z

‎Linux/macOS

Jack-ma: /* What you need */

2021-10-26T12:31:34Z

‎What you need

Hong at 12:28, 13 October 2021

2021-10-13T12:28:38Z

Hong at 12:27, 13 October 2021

2021-10-13T12:27:22Z

Hong: /* Boot the board to maskrom mode */

2021-10-13T12:22:53Z

‎Boot the board to maskrom mode

Hong: /* Boot the board to maskrom mode */

2021-10-13T12:20:38Z

‎Boot the board to maskrom mode

Hong at 12:01, 13 October 2021

2021-10-13T12:01:07Z

Show changes

Hong at 09:31, 13 October 2021

2021-10-13T09:31:47Z

@@ Line 143: / Line 143: @@
      rkdeveloptool ld        # List the device
      DevNo=1	Vid=0x2207,Pid=0x330c,LocationID=305	Maskrom
-Download the loader (flash helper) to init the ram and prepare the flashing environment etc. If you don't have it, you can download it from [https://dl.radxa.com/rockpi/images/loader/ here]
+Download the loader (flash helper) to init the ram and prepare the flashing environment etc. If you don't have it, you can download it from [https://dl.radxa.com/rock3/images/loader/ here]
      rkdeveloptool db rk356x_loader_vxxxx.bin
 Write the GPT image to eMMC, start to write from offset '''0'''. you can get image from [https://github.com/radxa/rock-3-images-released/releases here].

@@ Line 7: / Line 7: @@
 ===What you need ===
 ===== Necessary =====
-* CM4 IO  main board
+* Radxa CM3
-* CM4 IO  top board
+* Raspberry Pi CM4 IO board
 * One of the Storage media below:
 ** microSD, larger than 8GB.
@@ Line 33: / Line 33: @@
 ** Audio can be played through speaker or headphones using a standard 3.5mm jack.
 * [[rock3/hardware/wifi | WiFi/BT Cards]]
 === Install on eMMC from USB port ===

@@ Line 4: / Line 4: @@
      [[rock3 | ROCK 3]] > [[rock3/CM3 | Compute Module 3]] > [[Rock3/CM3/raspcm4io | Raspberry Pi CM4 IO Board]]
-== Getting Started ==
+= Getting Started =
 ===What you need ===
 ===== Necessary =====
@@ Line 183: / Line 183: @@
-== Status ==
+= Status =
-== Resource ==
+= Resource =
 ====<span id="gpio">General purpose input-output (GPIO) connector</span> ====

@@ Line 39: / Line 39: @@
 The PC tools we use to communicate with CM4 IO  in Maskrom mode are the '''rkdevelopment tool''' and '''AndroidTool tool'''.
 We use '''the rkdevelopment tool in Linux/macOS ''' and '''the AndroidTool tool under Windows'''.
 ==== Requirement ====
 * CM4 IO  board
 * Power adapter
 * '''USB Male A to Micro USB .
 ==== Install Tools&Drivers ====
 <div class="toccolours mw-collapsible" style="width:800px; overflow:auto;">
 ==== Windows ====
 <div class="mw-collapsible-content">
 =====Step 1：Install Android tool=====
 The tool is provided in a compressed package. First, download the compressed package of this tool, and click the download link [https://dl.radxa.com/tools/windows/RKDevTool_Release_v2.81.zip (RKDevTool_Release_v2.81.zip)]. After downloading, unzip it. Installation is complete.
 =====Step 2：Install driver=====
 Using the RK driver assistant tool to install the driver.
@@ Line 121: / Line 123: @@
 * 2. Plug the USB Male A to Micro USB cable to CM4 IO  port(the upper USB3 port), the other side to PC
 * 3.Press the key and hold, short the follow pins,  and then disconnect the pins,release the key.
 [[File:Cm4-io-maskrom.jpg |400px]]
 * 4. For Linux/macOS
 Now on your Linux PC, '''lsusb''' command show show the following usb devices
      Bus 003 Device 005: ID 2207:330c
 * 5. For Windows
 Open device manager in your Windows PC, check the Device Manager:
@@ Line 137: / Line 133: @@
 It means the device is in '''maskrom mode''' now.
 * 6. Now plug the eMMC module and proceed the next step to flash.
 === Begin Installation USB -> eMMC ===
@@ Line 147: / Line 142: @@
 <div class="mw-collapsible-content">
 On your PC, run the rkdeveloptool
      rkdeveloptool ld        # List the device
      DevNo=1	Vid=0x2207,Pid=0x330c,LocationID=305	Maskrom
 Download the loader (flash helper) to init the ram and prepare the flashing environment etc. If you don't have it, you can download it from [https://dl.radxa.com/rockpi/images/loader/ here]
      rkdeveloptool db rk356x_loader_vxxxx.bin
 Write the GPT image to eMMC, start to write from offset '''0'''. you can get image from [https://github.com/radxa/rock-3-images-released/releases here].
      rkdeveloptool wl 0 /path/to/xxx-gpt.img
 Reboot the device
      rkdeveloptool rd
 Now the device should boot the new image on eMMC
 Please notice that when you want to erase eMMC on board, you can use this command. Get zero.img from [https://dl.radxa.com/rockpi4/images/others/zero.img.gz here].
      rkdeveloptool db rk356x_loader_vxxxx.bin
      rkdeveloptool wl 0 zero.img
 </div>
 </div>
 <div class="toccolours mw-collapsible" style="width:800px; overflow:auto;">
 ==== Windows ====
 <div class="mw-collapsible-content">
 Double click the '''RKDevTool.exe''' and you will see the following interface:
 Double click this red box and modify it to '''image''' in the second row.
 [[File:Modify-options.jpeg | 600px]]
 ===== Step 1: Select Loader =====
 If your CM4 IO  is in maskrom mode and connects to PC, you can see that the program detect it '''Found one MASKROM Device''' in the red box
 Next, click the button in the first row on the right last columns select the loader "rk356x_xxx_ loader_ xxxxx.bin ",
 [[File:select-loader-bin.jpeg | 600px]]
 ''Note:'' the loader (flash helper) is used to init the ram and prepare the flashing environment etc.
 If you don't have it, you can download it from [https://dl.radxa.com/rock3/images/loader/rk356x_spl_loader_ddr1056_v1.06.110.bin here]
 ===== Step 2: Select Image =====
 Then click the right last columns to in the Image row and choose the image you want to flash.You can download the image from [https://github.com/radxa/rock-3-images-released/releases here]
 ''Note'': Normally the image name should ends with xxx-gpt.img. If the image name ends with xxx-rkupdate.img, you can not flash with this method.
 ===== Step 3: Run =====
 Finally, click the "run" button, and you will see the content on the right. When the progress reaches 100% or show '''Download image OK''' in the red box, the download is completed.
 [[File:3a-run-image.jpeg | 600px]]
 </div>

@@ Line 122: / Line 122: @@
 * 3.Press the key and hold, short the follow pins,  and then disconnect the pins,release the key.
-[[File:3a-maskrom.png | 400px]]
+[[File:Cm4-io-maskrom.jpg |400px]]
 * 4. For Linux/macOS

← Older revision		Revision as of 09:31, 13 October 2021
Line 5:		Line 5:

	== Getting Started ==		== Getting Started ==
		+	=== What you need ===
		+
		+	==== Necessary ====
		+	* CM4 IO main board
		+	* CM4 IO top board
		+
		+	* One of the Storage media below:
		+	** microSD, larger than 8GB.
		+
		+	* Power supply
		+	** The CM4 is powered by DC port and has a wide range of input voltage, 12V.
		+
		+	* USB Keyboard and Mouse
		+	** With four USB-A connectors, CM4 IO can be equipped with a full sized keyboard and mouse.
		+
		+	* Monitor and HDMI Cable
		+	** CM4 IO is equipped with a full sized HDMI connector. HDMI capable monitor is recommended.
		+	** HDMI EDID display data is used to determine the best display resolution. On monitors and TVs that support 1080p (or 4K) this resolution will be selected. If 1080p is not supported the next available resolution reported by EDID will be used. This selected mode will work with MOST but not all monitors/TVs.
		+
		+	*Micro USB
		+	**If you want write image on CM4 IO from USB port , commands you need an USB Male A to Micro USB cable to connect CM4 IO and PC.
		+
		+	=== Optional ===
		+	* microSD Card Reader
		+	** For flashing the image into microSD Card
		+
		+	* USB type A to type Micro USB
		+	** Write image on CM4 IO from USB port
		+
		+	* USB to TTL serial cable
		+	** This is needed for serial console.
		+
		+	* Ethernet cable
		+	** CM4 IO supports Internet access via WIFI or Ethernet.
		+	** An Ethernet cable is used to connect your CM4 IO to a local network and the Interne
		+
		+	* Audio cable
		+	** Audio can be played through speaker or headphones using a standard 3.5mm jack.
		+
		+	* [[rock3/hardware/wifi \| WiFi/BT Cards]]
		+
		+
		+

	== Status ==		== Status ==