Rock/flash the image - Revision history

Maycides at 02:37, 16 August 2023

2023-08-16T02:37:41Z

Shine at 03:11, 24 April 2020

2020-04-24T03:11:26Z

Shine at 02:24, 24 April 2020

2020-04-24T02:24:30Z

Hipboi: /* Flash firmware by partation */

2019-03-21T08:58:57Z

‎Flash firmware by partation

Hipboi: /* Flash Image */

2019-03-21T08:58:23Z

‎Flash Image

Hipboi: /* a. Install using RK Driver Assistant tools */

2019-03-21T08:56:54Z

‎a. Install using RK Driver Assistant tools

PeiYao Wang: /* Flashing failed */

2016-01-14T09:56:31Z

‎Flashing failed

PeiYao Wang: /* RKBatchTool can not recognize the board */

2016-01-14T09:49:47Z

‎RKBatchTool can not recognize the board

PeiYao Wang: /* Using RKAndroidTool to flash image by partitions(Advanced) */

2016-01-14T09:47:52Z

‎Using RKAndroidTool to flash image by partitions(Advanced)

PeiYao Wang: /* Flash the whole firmware */

2016-01-14T09:46:40Z

‎Flash the whole firmware

@@ Line 170: / Line 170: @@
 === Upgrade_tool from Rockchip ===
-Download the Rockchip linux upgrade tool [http://dl.radxa.com/rock/tools/linux/Linux_Upgrade_Tool_v1.21.zip here]. Unzip it and you will get a file called '''upgrade_tool''' which is a binary executable file under Linux.
+Download the Rockchip linux upgrade tool [http://dl.radxa.com/rock/tools/linux/Linux_Upgrade_Tool_V2.1.zip here]. Unzip it and you will get a file called '''upgrade_tool''' which is a binary executable file under Linux.
 Note:  there are two ways to flash the android image.

@@ Line 70: / Line 70: @@
 ===Flash Image===
-Download the tool first  [https://github.com/rockchip-linux/tools/raw/master/windows/AndroidTool_Release_v2.61.zip AndroidTool_Release_v2.61.zip]
+Download the tool first  [https://github.com/rockchip-linux/tools/raw/master/windows/AndroidTool_Release_v2.71.zip AndroidTool_Release_v2.71.zip]
 There are two methods to flash an image.

@@ Line 31: / Line 31: @@
 Note:The method just support WinXp,Vista,Win7, NOT SUPPORT Win8
-There’s no need to connect your Rockchip device during this procedure just download and extract [https://github.com/rockchip-linux/tools/raw/master/windows/DriverAssitant_v4.7.zip RKDriverAssistant.zip]
+There’s no need to connect your Rockchip device during this procedure just download and extract [https://github.com/rockchip-linux/tools/raw/master/windows/DriverAssitant_v4.91.zip RKDriverAssistant.zip]
 Then double click on DriverInstall.exe in the RKDriverAssistant directory to start the utility.
 If you've previously tried to install the Rockchip USB  drivers for any Rockchip devices make sure you click “Uninstall Driver” first.

@@ Line 97: / Line 97: @@
 [[File:Flash_whole_firmware_2.png]]
-====Flash firmware by partation====
+====Flash firmware by partitions====
 Power down the Radxa Rock board and connect the Radxa Rock board to the computer then let the board go to [[Rock/Loader mode|loader mode]] after the program should detect the device.<br/>
@@ Line 105: / Line 105: @@
 Or “Found One Loader Device” at the bottom of the tool when you flashed image not first time.
-Then select  the partations you need update, and select the right image which you can find under rockdev or kernel directory.   finally click "Run " to flash
+Then select  the partitions you need update, and select the right image which you can find under rockdev or kernel directory.   finally click "Run " to flash
-Note: if your address of the partation doesn't the same as the pic below, you can modify the address by click the  address item.
+Note: if your address of the partitions doesn't the same as the pic below, you can modify the address by click the  address item.
 [[File:Flash_whole_firmware_3.png]]

@@ Line 70: / Line 70: @@
 ===Flash Image===
-Download the tool first  [http://dl.radxa.com/rock/tools/windows/AndroidTool_Release_v2.3.zip AndroidTool_Release_v2.3.zip]
+Download the tool first  [https://github.com/rockchip-linux/tools/raw/master/windows/AndroidTool_Release_v2.61.zip AndroidTool_Release_v2.61.zip]
 There are two methods to flash an image.

@@ Line 135: / Line 135: @@
 ==== Flashing failed ====
 After flashing, the uart print
@@ Line 143: / Line 144: @@
 If flashing failed, try to format the nand flash before flashing it.
-* RKAndroid tool - click "Erease IDB" button to format the nand flash
+* AndroidTool V2.3  -> Upgrade firmware  - click "Erease Flash" button to format the nand flash
-* RK Batch tool - click "Restore" to format and then flash the image
+* AndroidTool V2.3  -> Download Image      - click  "LowerFormat" to format the nand flash
 ==== Preparing IDB failed ====

@@ Line 116: / Line 116: @@
 === Troubleshooting ===
-==== RKBatchTool can not recognize the board ====
+==== FlashTool  can not recognize the board ====
 This often happened by the follow reasons:
@@ Line 131: / Line 131: @@
 ) bad quality usb cable, you can change a short and good quality one to try again
 If the problem still exists, you can refer to the topics in [http://talk.radxa.com talk.radxa.com], create a new topic on it or send email to support@radxa.com

← Older revision		Revision as of 09:47, 14 January 2016
Line 114:		Line 114:

	http://v.youku.com/v_show/id_XNjkzNDk3MjEy.html		http://v.youku.com/v_show/id_XNjkzNDk3MjEy.html
−
−	~~====Using RKAndroidTool to flash image by partitions(Advanced) ====~~
−	~~Download RKAndroidTools from [http://dl.radxa.com/rock/tools/windows/RKDevelopTool_v1.37.zip here]. Unzip it the file and double click RKAndroidTool.exe, you will then see the interface as follows:~~
−
−	~~[[File:rkandroidtool_flash_image_1.png]]~~
−
−	~~Power down the Radxa Rock board and connect the Radxa Rock board to the computer and let the board go to [[Rock/Loader mode\|loader mode]] then the program will detect it.~~
−
−	~~[[File:rkandroidtool_flash_image_2.png]]~~
−
−	There are eight selections to choose from so select the correct row and then select the checkbox to the left of the row to select it. After you must click the column on the right side for the path of the file you want to flash. You can then select one or more files and flash them at once. Finally Click "Run" to flash images to the device (the right most selection shows the log of the progress).
−
−	~~[[File:rkandroidtool_flash_image_3.png]]~~
−
−	~~[[File:rkandroidtool_flash_image_4.png]]~~
−
−	~~If successful the board will disconnect from the tool and boot into the system.~~
−
−	~~Please Note:~~
−
−	~~# The kernel is contained within the boot.img when you package the image by "./mkimage.sh ota" please see [[Rock/Android_Build]] for more information.~~
−	~~# you can flash one of more image at one time as needed~~

	=== Troubleshooting ===		=== Troubleshooting ===

@@ Line 82: / Line 82: @@
 ====Flash the whole firmware ====
-[[File:flash_image_7.jpg]]
+Or “Found One Loader Device” at the bottom of the tool when you flashed image not first time
-Select an image (rockdev/update.img). For information on how to make nand image see [[Rock/update.img | update.img]]<br/>
+Then Select an image (rockdev/update.img). For information on how to make nand image see [[Rock/update.img | update.img]]<br/>
-[[File:flash_image_8.jpg]]
 Power down the Radxa Rock board and connect the Radxa Rock board to the computer then let the board go to [[Rock/Loader mode|loader mode]] after the program should detect the device.<br/>
-Click the "Upgrade" button to begin flashing and when the flashing process finishes successfully you will see the following interface.<br/>
+you can see “Found One MASKROM device “ at the bottom of the tool  when you first flash the board or just unbrick the board
-[[File:flash_image_10.jpg]]
-If the flashing has aborted ,it could possibly be an error with the update.img, you can either try to redo the operations above or make the update.img again!
+[[File:Flash_whole_firmware_3.png]]
-Here is the video
+Here is the video you can refer
 http://v.youku.com/v_show/id_XNjkzNDk3MjEy.html