Rock/FreeBSD - Revision history

Naobsd at 12:05, 30 May 2014

2014-05-30T12:05:48Z

Naobsd at 12:02, 30 May 2014

2014-05-30T12:02:23Z

Naobsd at 23:57, 28 May 2014

2014-05-28T23:57:36Z

Wheelcomplex: /* How to boot FreeBSD */

2014-01-08T07:54:39Z

‎How to boot FreeBSD

Wheelcomplex: /* How to boot FreeBSD */

2014-01-08T07:21:45Z

‎How to boot FreeBSD

Wheelcomplex: /* How to boot FreeBSD */

2014-01-08T04:08:28Z

‎How to boot FreeBSD

Hipboi at 09:42, 21 November 2013

2013-11-21T09:42:32Z

Hipboi: Created page with " {{Languages|rock/Android_Build}} TOC == Status == Ganbold, a FreeBSD developer, now get FreeBSD booting on rockchip platform. Ganbold told us only basic stuffs, gpio,..."

2013-11-21T09:42:02Z

Created page with " {{Languages|rock/Android_Build}} __TOC__ == Status == Ganbold, a FreeBSD developer, now get FreeBSD booting on rockchip platform. Ganbold told us only basic stuffs, gpio,..."

New page

{{Languages|rock/Android_Build}}

__TOC__

== Status ==

Ganbold, a FreeBSD developer, now get FreeBSD booting on rockchip platform. Ganbold told us only basic stuffs, gpio, dwc usb host mode are working. But this is just a start :) If you are interested, ping ganbold at #radxa irc channel on freenode for more details.

== How to boot FreeBSD ==

The instructions are at FreeBSD ARM wiki

https://wiki.freebsd.org/FreeBSD/arm/Radxa%20Rock

== Boot log ==
Boot log can be found here:

http://radxa.com/2013/10/18/freebsd-11-0-is-booting-on-radxa-rock/

[[Category: Distributions]]
[[Category: Tutorial]]
[[Category: FreeBSD]]

@@ Line 13: / Line 13: @@
 https://wiki.freebsd.org/FreeBSD/arm/Radxa%20Rock
-you can flash FreeBSD kernel.img into kernel partition. but if another kernel is flashed in boot partition, boot partition is loaded. to avoid this, you have to flash dummy image (generated by rkcrc -k) into boot partition. (dummy image will be loaded but it will not be used by FreeBSD)
+you can flash FreeBSD kernel image into kernel partition. but if another kernel is flashed in boot partition (as kernel+ramdisk image made by mkbootimg), kernel will be loaded from boot partition. to avoid this, you have to flash dummy ramdisk image (generated by rkcrc -k) into boot partition. (dummy image will be loaded as ramdisk, but it will not be used by FreeBSD kernel)
 if you tried dual-boot, misc partition may have a command to boot from recovery partition. in this case, you may need to flash dummy image into recovery partition, or you may need to erase misc partition.

@@ Line 1: / Line 1: @@
 {{Languages|rock/FreeBSD}}
@@ Line 15: / Line 13: @@
 https://wiki.freebsd.org/FreeBSD/arm/Radxa%20Rock
-Ubuntu 13.10 amd64 rkflashtool build note:
+if you tried dual-boot, misc partition may have a command to boot from recovery partition. in this case, you may need to flash dummy image into recovery partition, or you may need to erase misc partition.
+if you are using Radxa Rock lite (and Engineering Sample with 1GB RAM), you have to use rk3188-radxa-lite.dts.
-. install libusb.h by sudo apt-get -y install libusb-1.0-0-dev
-−
-. Turn off the board. Then while pushing Recover button plug usb cable(connected to otg port) to PC and release Recover button.
-if rk3188 is no in recover mode you will got "rkflashtool: fatal: cannot open device" when running ./rkflashtool p > param.txt
-−
-. Use follow Makefile:
-<PRE>
-−
-all: rkflashtool
-−
-rkflashtool: rkflashtool.c
-	gcc -o rkflashtool rkflashtool.c -I/usr/include/libusb-1.0/ -lusb-1.0 -O2 -W -Wall
-−
-clean:
-	rm -f rkflashtool
-−
-param:
-	sudo ./rkflashtool r 0x0000 0x2000 > /tmp/parm
-−
-−
-</PRE>
-−
-== Boot log ==
-Boot log can be found here:
-−
-http://radxa.com/2013/10/18/freebsd-11-0-is-booting-on-radxa-rock/
 == dmesg ==
@@ Line 136: / Line 109: @@
 Spurious interrupt detected [0x000003ff]
 </pre>
 [[Category: Distributions]]
 [[Category: Tutorial]]
 [[Category: FreeBSD]]

@@ Line 21: / Line 21: @@
 . install libusb.h by sudo apt-get -y install libusb-1.0-0-dev
-.  use dmesg or lsusb to check radxa rock is connect ok:
+. Turn off the board. Then while pushing Recover button plug usb cable(connected to otg port) to PC and release Recover button.
+if rk3188 is no in recover mode you will got "rkflashtool: fatal: cannot open device" when running ./rkflashtool p > param.txt
-dmesg:
-<PRE>
-[187435.036508] usb 2-1.1.3: new high-speed USB device number 49 using ehci-pci
-[187435.141573] usb 2-1.1.3: New USB device found, idVendor=2207, idProduct=0006
-[187435.141586] usb 2-1.1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=4
-[187435.141592] usb 2-1.1.3: Product: radxa rock
-[187435.141598] usb 2-1.1.3: Manufacturer: radxa
-[187435.141603] usb 2-1.1.3: SerialNumber: 16EM84955F
-</PRE>
-−
-lsusb:
-−
-<PRE>
-Bus 002 Device 050: ID 2207:0006
-</PRE>
-−
-we got device ID 0x0006, and modify rkflashtool.c line 49 from   #define PID_RK3188          0x310b   to   #define PID_RK3188          0x0006
 . Use follow Makefile:

@@ Line 14: / Line 14: @@
 https://wiki.freebsd.org/FreeBSD/arm/Radxa%20Rock
 Ubuntu 13.10 amd64 rkflashtool build note:
 . install libusb.h by sudo apt-get -y install libusb-1.0-0-dev
 . Use follow Makefile:
 <PRE>
+#

← Older revision		Revision as of 04:08, 8 January 2014
Line 14:		Line 14:

	https://wiki.freebsd.org/FreeBSD/arm/Radxa%20Rock		https://wiki.freebsd.org/FreeBSD/arm/Radxa%20Rock
		+
		+	Ubuntu 13.10 amd64 rkflashtool build note:
		+	1. install libusb.h by sudo apt-get -y install libusb-1.0-0-dev
		+	2. Use follow Makefile:
		+	<PRE>
		+	#
		+	all: rkflashtool
		+
		+	rkflashtool: rkflashtool.c
		+	gcc -o rkflashtool rkflashtool.c -I/usr/include/libusb-1.0/ -lusb-1.0 -O2 -W -Wall
		+
		+	clean:
		+	rm -f rkflashtool
		+
		+	param:
		+	sudo ./rkflashtool r 0x0000 0x2000 > /tmp/parm
		+
		+	#
		+	</PRE>

	== Boot log ==		== Boot log ==

← Older revision		Revision as of 09:42, 21 November 2013
Line 1:		Line 1:


−	{{Languages\|rock/~~Android_Build~~}}	+	{{Languages\|rock/FreeBSD}}

	__TOC__		__TOC__

Rock/FreeBSD - Revision history

Naobsd at 12:05, 30 May 2014

Naobsd at 12:02, 30 May 2014

Naobsd at 23:57, 28 May 2014

Wheelcomplex: /* How to boot FreeBSD */

Wheelcomplex: /* How to boot FreeBSD */

Wheelcomplex: /* How to boot FreeBSD */

Hipboi at 09:42, 21 November 2013

Hipboi: Created page with " {{Languages|rock/Android_Build}} __TOC__ == Status == Ganbold, a FreeBSD developer, now get FreeBSD booting on rockchip platform. Ganbold told us only basic stuffs, gpio,..."

Hipboi: Created page with " {{Languages|rock/Android_Build}} TOC == Status == Ganbold, a FreeBSD developer, now get FreeBSD booting on rockchip platform. Ganbold told us only basic stuffs, gpio,..."