Dual Quad SATA HAT - Revision history

Setq: /* Software support */

2024-06-20T08:53:07Z

‎Software support

RadxaYuntian: /* NAS support(optional) */

2022-09-13T04:03:15Z

‎NAS support(optional)

Setq: /* Upgrade firmware */

2020-09-12T12:15:22Z

‎Upgrade firmware

Setq at 10:03, 4 September 2020

2020-09-04T10:03:09Z

Setq: /* NAS support(optional) */

2020-08-24T03:45:44Z

‎NAS support(optional)

Setq at 03:56, 31 July 2020

2020-07-31T03:56:20Z

Setq at 03:37, 31 July 2020

2020-07-31T03:37:34Z

Setq at 06:38, 23 July 2020

2020-07-23T06:38:31Z

Setq at 10:02, 20 July 2020

2020-07-20T10:02:16Z

Hipboi: /* Software configuration */

2020-07-01T02:16:56Z

‎Software configuration

@@ Line 26: / Line 26: @@
 We provide an install script to help you get the SATA software that works in Raspberry Pi 4B.
-[[File:Get-rockpi-sata.png]]
+  sudo apt update
- curl -sL https://rock.sh/get-rockpi-sata | sudo -E bash -
+Just copy the commands above and paste it into the terminal and press enter. If you want more settings, check out section  Software Configuration at the bottom of the page.
-−
-Just copy the command above and paste it into the terminal and press enter. If you want more settings, check out section  Software Configuration at the bottom of the page.
 === Upgrade firmware ===

@@ Line 38: / Line 38: @@
 . [https://forum.radxa.com/t/how-to-upgrade-f-w-with-jms561-under-windows/4437 How to upgrade F/W with jms561 under Windows] (recommend)
-=== NAS support(optional) ===
+=== Common NAS OS issues ===
 ===== OpenMediaVault =====
 Install: [https://github.com/OpenMediaVault-Plugin-Developers/docs/blob/master/Adden-B-Installing_OMV5_on_an%20R-PI.pdf Installing OMV5 on Raspberry PI's]

@@ Line 36: / Line 36: @@
 . [https://forum.radxa.com/t/how-to-upgrade-f-w-with-jms561-under-raspberry-pi/3560 How to upgrade F/W with jms561 under Raspberry Pi]
-. How to upgrade F/W with jms561 under Windows (WIP)
+. [https://forum.radxa.com/t/how-to-upgrade-f-w-with-jms561-under-windows/4437 How to upgrade F/W with jms561 under Windows] (recommend)
 === NAS support(optional) ===

← Older revision		Revision as of 10:03, 4 September 2020
Line 71:		Line 71:

	This will ensure that unique paths are created based on the serial number of the actual drives and not the hat.		This will ensure that unique paths are created based on the serial number of the actual drives and not the hat.
		+
		+	=== RTC support(optional) ===
		+
		+	In version 1.2, we added RTC functionality. If you want to use the RTC, you will need to install a battery (socket next to the fan). For Raspbian, you can do this to enable RTC:
		+
		+	Add '''dtoverlay=i2c-rtc,pcf8563''' to the /boot/config.txt and reboot. Execute '''sudo hwclock -w''' after reboot.
		+
		+	[[File:Rtc-battery.jpeg \| 400px]]

	=== Supplied with this product ===		=== Supplied with this product ===

@@ Line 59: / Line 59: @@
      #!/bin/bash
      /sbin/hdparm -I /dev/$1 | grep 'Serial Number' | awk '{print $3}'
 And you need to add execute permission to the file via the following:
      chmod +x /root/serial.sh
 This will ensure that unique paths are created based on the serial number of the actual drives and not the hat.

← Older revision		Revision as of 03:56, 31 July 2020
Line 25:		Line 25:

	We provide an install script to help you get the SATA software that works in Raspberry Pi 4B.		We provide an install script to help you get the SATA software that works in Raspberry Pi 4B.
		+
		+	[[File:Get-rockpi-sata.png]]

	curl -sL https://rock.sh/get-rockpi-sata \| sudo -E bash -		curl -sL https://rock.sh/get-rockpi-sata \| sudo -E bash -

@@ Line 7: / Line 7: @@
 __TOC__
-ROCK Pi Dual/Quad SATA HAT is an addon HAT designed for Raspberry Pi 4. It utilizes the high speed USB3 buses on Raspberry Pi 4 and providing a complete NAS solution based on Raspberry Pi 4. It has the following features:
+ROCK Pi Dual/Quad SATA HAT is an addon HAT designed for Raspberry Pi 4. It utilizes the high-speed USB3 buses on Raspberry Pi 4 and providing a complete NAS solution based on Raspberry Pi 4. It has the following features:
 * Up to 4x HDD/SSD, support 2.5inch or 3.5inch SSD
@@ Line 24: / Line 24: @@
 === Software support  ===
-We provide a install script to help you get the SATA software that works in Raspberry Pi 4B.
+We provide an install script to help you get the SATA software that works in Raspberry Pi 4B.
   curl -sL https://rock.sh/get-rockpi-sata | sudo -E bash -
 Just copy the command above and paste it into the terminal and press enter. If you want more settings, check out section  Software Configuration at the bottom of the page.
 === Upgrade firmware ===
@@ Line 106: / Line 102: @@
 === Model Number ===
-Since the Raspberry Pi 4 changes the form factor(swapping USB and RJ45), we need different USB connection adapter. The ROCK Pi 4 shares form factor with Raspberry Pi 3/3B+.  Below is the different model number:
+Since the Raspberry Pi 4 changes the form factor(swapping USB and RJ45), we need a different USB connection adapter. The ROCK Pi 4 shares form factor with Raspberry Pi 3/3B+.  Below is the different model number:
 {| class="wikitable" border="1"
@@ Line 361: / Line 357: @@
 =====Option 1: Powering from Raspberry Pi/ROCK Pi 40P GPIO header =====
-The Raspberry Pi GPIO [https://pinout.xyz/pinout/pin2_5v_power +5V can provide up to 1.5A power], the typical SSD is [https://www.anandtech.com/show/8747/samsung-ssd-850-evo-review/10 3W power consumption]. So you can drive up to two SSDs directly powering from Raspberry Pi with good 5V/5A USB C power adapter.
+The Raspberry Pi GPIO [https://pinout.xyz/pinout/pin2_5v_power +5V can provide up to 1.5A power], the typical SSD is [https://www.anandtech.com/show/8747/samsung-ssd-850-evo-review/10 3W power consumption]. So you can drive up to two SSDs directly powering from Raspberry Pi with a good 5V/5A USB C power adapter.
 The ROCK Pi 4 GPIO +5V can provide up to 4A current. You can drive four SSD/HDD directly if your power adapter can provide > 35W power.
@@ Line 369: / Line 365: @@
 '''V1.1 SATA HAT'''
-For V1.1 hardware revision, we use USB C for the power input on SATA HAT with PD/QC support. Same as option 1, you can choose USB PD power adapter > 35W to driver up to four 2.5inch HDDs and Raspberry PI at the same time. 3.5inch HDD powering is not supported from the USB C port.
+For V1.1 hardware revision, we use USB C for the power input on SATA HAT with PD/QC support. Same as option 1, you can choose USB PD power adapter > 35W to drive up to four 2.5inch HDDs and Raspberry PI at the same time. 3.5inch HDD powering is not supported by the USB C port.
 '''V1.2 SATA HAT'''
-For V1.2, we changed the power jack on SATA HAT to 12V DC because the 12V power adapter is much cheaper than USB C PD adapter. Also, users want to power 3.5inch HDD with power adapter instead of ATX PSU. The 12V DC jack is 5.5x2.1mm diameter. You need at least 12V/3A to power four 2.5inch HDD and 12V/5A to power four 3.5inch HDD.
+For V1.2, we changed the power jack on SATA HAT to 12V DC because the 12V power adapter is much cheaper than the USB C PD adapter. Also, users want to power 3.5inch HDD with a power adapter instead of ATX PSU. The 12V DC jack is 5.5x2.1mm diameter. You need at least 12V/3A to power four 2.5inch HDD and 12V/5A to power four 3.5inch HDD.
 =====Option 3: Powering from ATX PSU=====
-If you plan to put the SATA HAT in a PC enclosure, then you can use the ATX PSU. Mostly ATX PSU can meet the power requirement. You need a ATX Floppy cable to power the SATA HAT and Raspberry Pi.
+If you plan to put the SATA HAT in a PC enclosure, then you can use the ATX PSU. Mostly ATX PSU can meet the power requirement. You need an ATX Floppy cable to power the SATA HAT and Raspberry Pi.
 === Software configuration ===

← Older revision		Revision as of 06:38, 23 July 2020
Line 29:		Line 29:

	Just copy the command above and paste it into the terminal and press enter. If you want more settings, check out section Software Configuration at the bottom of the page.		Just copy the command above and paste it into the terminal and press enter. If you want more settings, check out section Software Configuration at the bottom of the page.
		+
		+	'''In particular, users of [https://ubuntu.com/download/raspberry-pi Ubuntu]''', please use the installation script below:
		+
		+	curl -sL https://rock.sh/get-sata-ubuntu \| sudo -E bash -

	=== Upgrade firmware ===		=== Upgrade firmware ===

@@ Line 425: / Line 425: @@
 See Forum Discussion -> [https://forum.radxa.com/t/how-to-upgrade-f-w-with-jms561-under-raspberry-pi/3560 How to upgrade F/W with jms561 under Raspberry Pi]
 === Dimensions ===
 === Hardware Revision ===

@@ Line 421: / Line 421: @@
 f-temp = false
 </syntaxhighlight>
 === Dimensions ===
 === Hardware Revision ===