View source for RockpiS/getting started/troubleshooting

{{rockpiS_header}}
{{Languages|rockpiS/getting_started/troubleshooting}}

    [[rockpiS | ROCK Pi S]] > [[rockpiS/getting_started | Getting Started]] > [[rockpiS/getting_started/troubleshooting | Troubleshooting]]

=== Check the serial console ===

1. By default, the ROCK Pi S uses the colorful 26PIN GPIO header PIN8 and PIN10.

2. The USB to TTL chip must support 1.5Mbps baud rate, some cheap USB to TTL chip can not support such high baud rate.

=== Default non-root user  ===

  user: rock
  password: rock

=== Using SSH ===

Package ssh  is pre-installed on ROCK Pi S  system image. 

To access ROCK Pi S by SSH, try 

  ping ip-of-device
  ssh rock@ip-of-device

or

  ping rockpis.local
  ssh rock@rockpis.local