View source for ROCKPI S PoE HAT

{{Languages|ROCKPI_S_PoE_HAT}}
__NOTOC__

    [[home | Home]] > [[PoE_HAT |PoE HAT]] > [[ROCKPI_S_PoE_HAT | ROCK Pi S PoE HAT]]

=== Introduction ===

[[File:S_PoE_HAT.png | 400px |right]]

ROCK Pi S PoE HAT is a HAT accessories designed for ROCK Pi S. The ROCK Pi S PoE HAT allows you to power your ROCK Pi S using Power over Ethernet–enabled networks; for this product to be used, the network it is connected to needs to have power-sourcing equipment installed.

It comes with the following features:

* 802.3af up to 10W(5V/2A)
* Optional 26PIN x2 GPIO pass-through exported
* Works with ROCK Pi S
* Clean design by hiding the the big transformer inside
* EEPROM for HAT identity and driver probe
* headphone jack exported
* Provide 12V power output with 2P connector

=== Supplied with this product ===
* ROCK Pi S PoE HAT
* Mechanical spacers
=== Other hardware needed ===
* ROCK Pi S
* An Ethernet cable
* Power-sourcing equipment for a 802.3af or 802.3at Power over Ethernet network

=== Software support ===

The PoE doesn't require software to power and run. For the head phone jack and PDM Mic Array support, please update to the latest ROCK Pi S firmware.

=== Model ===

{| class="wikitable" border="1"
|-
! Model
! Description
|-
| FS
| For ROCK Pi S
|-
| FSL
| FS with 26PIN x2 GPIO pass-through exported
|}

The difference between F3 and F4 is, F3 and F4 uses different GPIO for fan control. F4 use ADC for temperature detection, while F3 uses DS18B20.

=== PINOUT ===

==== PoE HAT for ROCK Pi S ====

{| class="wikitable"
! Description || Function ||  Pin# || || Pin# || Function || Description
|- 
|    || || 1 ||  || 2 ||    || 
|-
|    ||  || 3 ||  || 4 ||    || 
|- 
|    ||  || 5 ||  || 6 ||    || 
|- 
|    || GPIO2_B3 || 7 ||  || 8 ||   || 
|- 
|    ||  || 9 ||  || 10  ||    || 
|- 
|   ||   || 11 ||  || 12 ||    || 
|-
| control fan speed || PWM1 || 13 ||  || 14  ||    || 
|- 
|   || GPIO4_C5 || 15 ||  || 16  || GPIO4_D2 || enable/disable fan motor driver 
|- 
|    ||  || 17 ||  || 18 ||   || 
|- 
|    ||  || 19 ||  || 20 ||    || 
|-
|    || || 21 ||  || 22 ||    || 
|- 
|    ||  || 23 ||  || 24 ||   || 
|- 
|    ||  || 25 ||  || 26 || ADC_IN0 || Get ADC value to get the temperature value
|-
| connect to EEPROM SDA pin || I2C2_SDA || 27 ||  || 28 || I2C2_SCL || connect to EEPROM SCL pin
|- 
|    ||  || 29 ||  || 30 ||    || 
|- 
|    ||  || 31||  || 32 ||    || 
|- 
|   ||   || 33 ||  || 34 ||    || 
|- 
|    ||  || 35 ||  || 36 ||    || 
|- 
|    ||  || 37 ||  || 38 ||    || 
|- 
|    ||  || 39 ||  || 40 ||    || 
|}

==== FPC pinout ====

{| class="wikitable" 
|-
! Number
! Pin Name
|-
| 1
| VCC5V
|-
| 2
| VCC5V
|-
| 3
| VCC_IO_MIC
|-
| 4
| GND
|-
| 5
| GND
|-
| 6
| VCC_1V8_MIC
|-
| 7
| ADC_IN0
|-
| 8
| ADC_KEY_IN1
|-
| 9
| GND
|-
| 10<br />
| I2S0_MCLK
|-
| 11
| GND
|-
| 12
| GPIO2_A6 / I2S0_8CH_SCLK_RX / PDM_CLK_S_M2
|-
| 13
| GND
|-
| 14
| GPIO2_A5 / I2S0_SCLK_TX
|-
| 15
| GND
|-
| 16
| GPIO2_B0 / I2S0_8CH_LRCK_RX
|-
| 17
| GND
|-
| 18
| GPIO2_A7 / I2S0_8CH_LRCK_TX
|-
| 19
| GPIO2_B1 / I2S0_8CH_SDO0
|-
| 20
| GPIO2_B2 / I2S0_8CH_SDO1
|-
| 21
| GPIO2_B3 / I2S0_8CH_SDO2
|-
| 22
| GPIO2_B4 / I2S0_8CH_SDO3
|-
| 23
| GPIO2_B5 / I2S0_8CH_SDI0 / PDM_SDI0_M2
|-
| 24
| GPIO2_B6 / I2S0_8CH_SDI1 / PDM_SDI1_M2
|-
| 25
| GPIO2_B7 / I2S0_8CH_SDI2 / PDM_SDI2_M2
|-
| 26
| GPIO2_C0 / I2S0_8CH_SDI3 / PDM_SDI3_M2
|-
| 27
| GND
|-
| 28
| GPIO0_C0 / PWM3 / I2C3_SCL_M0 		
|-
| 29
| GPIO0_B3 / I2C1_SDA 	
|-
| 30
| GPIO0_B4 / I2C1_SCL
|-
| 31
| GND
|-
| 32
| GND
|}

=== Dimensions ===
* [https://dl.radxa.com/accessories/poe-hat/rockpi_poe_hat_V1.2_20190521.dwg Download 2D file(.dwg) for ROCK Pi PoE HAT]