Radxa Wiki - User contributions [en]

Rock5/install/spi

2022-08-15T02:26:26Z

Nasca: Blanked the page

Rock5/install/usb-install-rock-5b

2022-08-15T02:26:21Z

Nasca: Created page with "{{rock5_header}} {{Languages|rock5/dev/usb-install}} ROCK 5 > Installation > [[rock5/dev/usb-install | Install the Image to eMMC from USB port]..."

{{rock5_header}}
{{Languages|rock5/dev/usb-install}}
[[rock5 | ROCK 5]] > [[rock5/dev | Installation]] > [[rock5/dev/usb-install | Install the Image to eMMC from USB port]]

== Install the image to SPI Nor Flash from USB port ==
Rock 5 supports Maskrom mode, which is a special operation mode for CPU to wait for USB OTG port command.
The PC tools we use to communicate with rock 5 in Maskrom mode are the '''rkdeveloptool''' and '''RKDevTool'''.
We use '''the rkdeveloptool in Linux/macOS ''' and '''the RKDevTool under Windows'''.

=== Requirement ===

* Rock 5B
* type-c cable
* emmc module
* Windows/linux/macOS PC

=== Install Tools&Drivers ===

Please check this guide, [[rock5/install/rockchip-flash-tools | Install rockchip flash tools under Windows/Linux/MacOS PC]].

=== Boot the board to maskrom mode ===

insert the type-c cable into the power interface(or the usb type-c OTG port),and the other side to PC

[[File:boot5b.png|400px]]

=== Write U-Boot images to SPI Nor Flash or erase SPI Nor Flash ===

==== Linux/MacOS ====

On your PC, run the rkdeveloptool

sudo rkdeveloptool ld
DevNo=1 Vid=0x2207,Pid=0x350b,LocationID=106 Maskrom

Download the loader (flash helper) to init the ram and prepare the flashing environment etc. If you don't have it, you can download it from [https://dl.radxa.com/rock5/sw/images/loader/rk3588_spl_loader_v1.07.111.bin here]

sudo rkdeveloptool db /path/to/rk3588_spl_loader_v1.07.111.bin # will output:
Downloading bootloader succeeded.

Write bootloader. The idbloader.img and the u-boot.itb ,mentioned bellow, can be generated by [Rockchip Debian SDK](https://wiki.radxa.com/Rock5/dev/Debian), and if you don't generate them by yourself , just use what we provide .
[https://dl.radxa.com/rockpi5/images/ idbloader.img] [https://dl.radxa.com/rockpi5/images/ u-boot.itb]

sudo rkdeveloptool wl 64 idbloader.img
Write LBA from file (100%)

sudo rkdeveloptool wl 64 idbloader.img
Write LBA from file (100%)

Reboot the device
rkdeveloptool rd

now , the device should boot on SPI Nor Flash

==== Windows ====
Double click the RKDevTool.exe and you will see the following interface:
Double click the '''RKDevTool.exe''' and you will see the following interface:

===== Step 1: comfirm that rock pi 5b is in maskrom mode =====

If your ROCK Pi 4 is in maskrom mode and connects to PC, you can see that the program detect it, as the red arrow below

===== Step 2: Select Loader =====

Next, click the right last columns in the "Loader" row to select rk3588_spl_loader_v1.07.111.bin

===== Step 3: Select idbloader =====

Next, click the right last columns in the "idbloader" row to select idbloader.img

===== Step 4: Select U-boot =====

Then, click the right last columns in the "u-boot.itb" row to select u-boot.itb

[[File: select.png |700px]]

===== Step 5: Excute =====

Finally, click the "Excute" button, and you will see the content in the red box on the right. When the progress reaches 100%, the download is completed.

[[File: complete.png |700px]]

== Erase SPI Nor Flash ==

=== Linux/MacOS ===

Please notice that when you want to erase SPI Nor Flash, fire these commands. If you don't have zero.img, just use what we provide. [https://dl.radxa.com/rockpi5/images/ zero.img]

rkdeveloptool db rk356x_spl_loader_ddr1056_v1.10.111.bin
rkdeveloptool wl 0 zero.img
rkdeveloptool rd

=== Windows ===

Before Erasing, please comfirm that rock pi 5b is in MASKROM mode

==== Step 1: Download ====
Choose the "Advanced features" button, then select rk3588_spl_loader_v1.07.111.bin, next click the "Download" button

==== Step 2: Erase all ====
Click the "erase all" button

==== Step 3: Reboot device ====

[[File: erase.png |700px]]

=== Troubleshooting ===

* If you have issue with flashing via USB OTG, start a new post on the forum, https://forum.radxa.com/c/rock5.

Rock5/install/spi

2022-08-15T02:10:38Z

Nasca:

{{rock5_header}}
{{Languages|rock5/dev/usb-install}}
[[rock5 | ROCK 5]] > [[rock5/dev | Installation]] > [[rock5/dev/usb-install | Install the Image to SPI Nor Flash]]

== Install the image to SPI Nor Flash from USB port ==
Rock 5 supports Maskrom mode, which is a special operation mode for CPU to wait for USB OTG port command.
The PC tools we use to communicate with rock 5 in Maskrom mode are the '''rkdeveloptool''' and '''RKDevTool'''.
We use '''the rkdeveloptool in Linux/macOS ''' and '''the RKDevTool under Windows'''.

=== Requirement ===

* Rock 5B
* type-c cable
* emmc module
* Windows/linux/macOS PC

=== Install Tools&Drivers ===

Please check this guide, [[rock5/install/rockchip-flash-tools | Install rockchip flash tools under Windows/Linux/MacOS PC]].

=== Boot the board to maskrom mode ===

insert the type-c cable into the power interface(or the usb type-c OTG port),and the other side to PC

[[File:boot5b.png|400px]]

=== Write U-Boot images to SPI Nor Flash or erase SPI Nor Flash ===

==== Linux/MacOS ====

On your PC, run the rkdeveloptool

sudo rkdeveloptool ld
DevNo=1 Vid=0x2207,Pid=0x350b,LocationID=106 Maskrom

Download the loader (flash helper) to init the ram and prepare the flashing environment etc. If you don't have it, you can download it from [https://dl.radxa.com/rock5/sw/images/loader/rk3588_spl_loader_v1.07.111.bin here]

sudo rkdeveloptool db /path/to/rk3588_spl_loader_v1.07.111.bin # will output:
Downloading bootloader succeeded.

Write bootloader. The idbloader.img and the u-boot.itb ,mentioned bellow, can be generated by [Rockchip Debian SDK](https://wiki.radxa.com/Rock5/dev/Debian), and if you don't generate them by yourself , just use what we provide .
[https://dl.radxa.com/rockpi5/images/ idbloader.img] [https://dl.radxa.com/rockpi5/images/ u-boot.itb]

sudo rkdeveloptool wl 64 idbloader.img
Write LBA from file (100%)

sudo rkdeveloptool wl 64 idbloader.img
Write LBA from file (100%)

Reboot the device
rkdeveloptool rd

now , the device should boot on SPI Nor Flash

==== Windows ====
Double click the RKDevTool.exe and you will see the following interface:
Double click the '''RKDevTool.exe''' and you will see the following interface:

===== Step 1: comfirm that rock pi 5b is in maskrom mode =====

If your ROCK Pi 4 is in maskrom mode and connects to PC, you can see that the program detect it, as the red arrow below

===== Step 2: Select Loader =====

Next, click the right last columns in the "Loader" row to select rk3588_spl_loader_v1.07.111.bin

===== Step 3: Select idbloader =====

Next, click the right last columns in the "idbloader" row to select idbloader.img

===== Step 4: Select U-boot =====

Then, click the right last columns in the "u-boot.itb" row to select u-boot.itb

[[File: select.png |700px]]

===== Step 5: Excute =====

Finally, click the "Excute" button, and you will see the content in the red box on the right. When the progress reaches 100%, the download is completed.

[[File: complete.png |700px]]

== Erase SPI Nor Flash ==

=== Linux/MacOS ===

Please notice that when you want to erase SPI Nor Flash, fire these commands. If you don't have zero.img, just use what we provide. [https://dl.radxa.com/rockpi5/images/ zero.img]

rkdeveloptool db rk356x_spl_loader_ddr1056_v1.10.111.bin
rkdeveloptool wl 0 zero.img
rkdeveloptool rd

=== Windows ===

Before Erasing, please comfirm that rock pi 5b is in MASKROM mode

==== Step 1: Download ====
Choose the "Advanced features" button, then select rk3588_spl_loader_v1.07.111.bin, next click the "Download" button

==== Step 2: Erase all ====
Click the "erase all" button

==== Step 3: Reboot device ====

[[File: erase.png |700px]]

=== Troubleshooting ===

* If you have issue with flashing via USB OTG, start a new post on the forum, https://forum.radxa.com/c/rock5.

Rock5/guide/radxa-ubuntu

2022-08-09T08:15:49Z

Nasca:

{{rock5_header}}

{{Languages|rock5/guide/radxa-ubuntu}}

[[rock5 | ROCK 5]] > [[rock5/guide | Guide]] > [[rock5/guide/radxa-ubuntu | How to use Radxa Official Ubuntu]]

__TOC__

=== Introduction to ROCK 5 Ubuntu ===

This guide is available for official ROCK 5 (ROCK 5B, etc) Ubuntu images.

ROCK 5 Ubuntu server is an easy to use system. While working with ROCK 5 Ubuntu Server, you will find it do well on playing music, Internet, Bluetooth, AI and so on.

ROCK 5 Ubuntu server uses '''systemd''' to manage system.

Command prepended by $ means the command may be executed by an unprivileged user. And command prepended by # means the command may be executed by an privileged user. But the symbol, $ or #, is not part of the command.

=== List of boards supported ===

* ROCK 5B

=== Access from the Host PC/Laptop ===

==== Option 1: HDMI monitor and Mouse ====

You would see Desktop on HDMI monitor.

==== Option 2: Serial console ====

See [[rock5/dev/serial-console | Serial Console]]

==== Option 3: SSH ====

SSH server is enabled on port 22 of ROCK 5 default image.

Please use [https://angryip.org/ angryip] to find your board IP address.

$ ping ip-of-device
$ ssh rock@ip-of-device

=== Default User Account ===

Non-root User:

User Name : rock
Password : rock

=== Root mode ===

rock is sudo user and switch to root can be done with the following command as user rock:

sudo su

For example:

rock@rock-5b:~$
rock@rock-5b:~$ sudo su
[sudo] password for rock:
root@rock-5b:/home/rock#

There is no password for root user by default. You can set the password via 'passwd root'.

root@rock-5b:/home/rock# passwd root
New password:
Retype new password:
passwd: password updated successfully
root@rock-5b:/home/rock#

=== Partition table ===

{| class="wikitable"
! Part Number || Offset || Name || Description
|-
|(raw) || 32KB || loader1 || First stage loader
|-
|(raw) || 8MB || loader2 || U-boot image
|-
| 1 || 16MB || boot ||Kernel partition, bootable
|-
| 2 || 528MB ||rootfs || Rootfs
|}

Offset when writing using '''dd'''

dd if=idbloader.img of=/dev/sdx seek=64
dd if=u-boot.itb of=/dev/sdx seek=16384
dd if=boot.img of=/dev/sdx seek=32768
dd if=rootfs.img of=/dev/sdx seek=1081344

=== Radxa APT ===

Radxa APT source includes stable one and testing one. Stable source includes stable packages while testing source includes latest but maybe unstable packages.

Radxa APT stable source is added by default while testing source is not added.

You can uncomment line like "deb http://apt.radxa.com/focal-testing/ buster main" in file /etc/apt/sources.list.d/apt-radxa-com.list to add testing source.

See file /etc/apt/sources.list.d/apt-radxa-com.list

deb http://apt.radxa.com/focal-stable/ focal main
deb http://apt.radxa.com/focal-testing/ focal main

After adding testing source, you need to update APT and install your needed packages.

$ sudo apt-get update

For more detail about Radxa APT, please see [[rock5/linux/radxa-apt | Radxa APT]].

=== Upgrade necessary packages ===

Here is the example of upgrading rockchip-overlay and kernel packages.

$ sudo apt-get update
$ sudo apt-get install -y rockchip-overlay

=== Test RTC Device ===
ROCK 5B is equipped with one RTC IC hym8563.

Firstly, plug in RTC battery to give power to RTC IC. Please note that we should keep the RTC battery in the RTC connector.

Plug in power adaper to power on ROCK 5B.

And confirm that the rtc hym8563 device is created.

root@rock-5b:/home/rock# dmesg | grep rtc
[ 6.407133] rtc-hym8563 6-0051: rtc information is valid
[ 6.412731] rtc-hym8563 6-0051: registered as rtc0
[ 6.413779] rtc-hym8563 6-0051: setting system clock to 2022-06-22T01:22:26 UTC (1655860946)
Secondly, use the following commands to set the system time and synchronize it to rtc0.
root@rock-5b:/home/rock# hwclock -r
2021-06-12 08:10:02.613381+08:00
root@rock-5b:/home/rock# date
Wed Jun 22 10:06:10 CST 2022
root@rock-5b:/home/rock# hwclock -w
root@rock-5b:/home/rock# hwclock -r
root@rock-5b:/home/rock# poweroff
take the RTC battery off，after 10minute or longer，insert the rtc battery and power on rock5b，check whether the RTC is synchronized with the system clock
root@rock-5b:/home/rock# hwclock -r
2022-06-22 10:09:59.214788+08:00
root@rock-5b:/home/rock# date
Wed Jun 22 10:17:01 CST 2022

=== FAN test ===
check the weather the directory /sys/devices/platform/fd8b0010.pwm is existed

root@rock-5b:/home/rock# ls /sys/devices/platform/fd8b0010.pwm
driver driver_override modalias of_node power pwm subsystem supplier:platform:pinctrl uevent

use the bash script to Set PWM period, duty_cycle, polarity and enable with root permission
#! /bin/bash
echo 0 > /sys/class/pwm/pwmchip1/export
sleep 0.2
echo 40000 > /sys/class/pwm/pwmchip1/pwm0/period
sleep 0.2
echo 40000 > /sys/class/pwm/pwmchip1/pwm0/duty_cycle
sleep 0.2
echo normal > /sys/class/pwm/pwmchip1/pwm0/polarity
sleep 0.2
echo 1 > /sys/class/pwm/pwmchip1/pwm0/enable
sleep 0.2
turn off the fan
root@rock-5b:/home/rock# echo 0 > /sys/class/pwm/pwmchip1/pwm0/enable

=== Ethernet ===

<div class="bs-example bs-example-tabs">
<ul id="tabeth" class="nav nav-tabs nav-justified nav-tabs" style="margin:0;">
<li class="active" data-toggle="tab">[http://wiki.radxa.com/Nav_Tabs#5b-ethernet ROCK 5B]</li>
</ul>
</div>
<div id="tabeth" class="tab-content">

<div class="tab-pane active" id="5b-ethernet">
=== 5B Ethernet ===

ROCK 5B is equipped with one 2.5G Ethernet port.
You can use a network cable (one end connected to the external network port or route) to connect your ROCK 5B to the network.
The ROCK 5B will automatically configure the network for your surfing on the Internet.

Ethernet throughput test result table.

{| class="wikitable" border="1"
|-
! Direction
! Bitrate
|-
| Upstream
| 2.34 Gbits/sec
|-
| Downstream
| 2.35 Gbits/sec
|}

===== To test the Ethernet, we need to follow the steps: =====

* Switch to super user mode by command
$ sudo su

* Check whether the Ethernet is normal by command, ifconfig, which would show us a network card, eth0 or enP4p65s0 , and the Ethernet IP address. Also, use tool, ping, to connect to a normal domain.

$ ifconfig
$ ping www.baidu.com

* If failed to connect to a normal domain. , try

$ sudo dhclient eth0
or
$ sudo dhclient enP4p65s0

</div> 
</div>

=== Storage device ===

* uSD Card: /dev/mmcblk0
* eMMC: /dev/mmcblk1
* NVME M.2 SDD: /dev/nvme0n1

=== Changelog ===

Rock5/guide/radxa-debian

2022-08-09T08:10:55Z

Nasca:

{{rock5_header}}

{{Languages|rock5/guide/debian}}

[[rock5 | ROCK 5]] > [[rock5/guide | Guide]] > [[rock5/guide/radxa-debian | How to use Debian]]

__TOC__

=== Introduction to ROCK 5 Debian ===

This guide is available for official ROCK 5 Debian images.

ROCK 5 Debian is an easy to use desktop system. While working with ROCK 5 Debian, you will find it do well on playing music, Internet, Bluetooth, AI and so on.

ROCK 5 Debian uses '''systemd''' to manage system.

Command prepended by $ means the command may be executed by an unprivileged user. And command prepended by # means the command may be executed by an privileged user. But the symbol, $ or #, is not part of the command.

=== List of boards supported ===

* ROCK 5B

=== Access from the Host PC/Laptop ===

==== Option 1: HDMI monitor and Mouse ====

You would see Desktop on HDMI monitor.

==== Option 2: Serial console ====

See [[rock5/dev/serial-console | Serial Console]]

==== Option 3: SSH ====

SSH server is enabled on port 22 of ROCK 5 default image.

Please use [https://angryip.org/ angryip] to find your board IP address.

$ ping ip-of-device
$ ssh rock@ip-of-device

=== Default User Account ===

Non-root User:

User Name : rock
Password : rock

=== Root mode ===

rock is sudo user and switch to root can be done with the following command as user rock:

sudo su

For example:

rock@rock-5b:~$
rock@rock-5b:~$ sudo su
[sudo] password for rock:
root@rock-5b:/home/rock#

There is no password for root user by default. You can set the password via 'passwd root'.

root@rock-5b:/home/rock# passwd root
New password:
Retype new password:
passwd: password updated successfully
root@rock-5b:/home/rock#

=== Build ===

{| class="wikitable"
|-
! XFCE4 Desktop
|-
| * ROCK 5B
|}

=== Partition table ===

{| class="wikitable"
! Part Number || Offset || Name || Description
|-
|(raw) || 32KB || loader1 || First stage loader
|-
|(raw) || 8MB || loader2 || U-boot image
|-
| 1 || 16MB || boot ||Kernel partition, bootable
|-
| 2 || 528MB ||rootfs || Rootfs
|}

Offset when writing using '''dd'''

dd if=idbloader.img of=/dev/sdx seek=64
dd if=u-boot.itb of=/dev/sdx seek=16384
dd if=boot.img of=/dev/sdx seek=32768
dd if=rootfs.img of=/dev/sdx seek=1081344

=== Radxa APT ===

Radxa APT source includes stable one and testing one. Stable source includes stable packages while testing source includes latest but maybe unstable packages.

Radxa APT stable source is added by default while testing source is not added.

You can uncomment line like "deb http://apt.radxa.com/bullseye-testing/ bullseye main" in file /etc/apt/sources.list.d/apt-radxa-com.list to add testing source.

See file /etc/apt/sources.list.d/apt-radxa-com.list

deb http://apt.radxa.com/bullseye-stable/ bullseye main
deb http://apt.radxa.com/bullseye-testing/ bullseye main

After adding testing source, you need to update APT and install your needed packages.

$ sudo apt-get update

For more detail about Radxa APT, please see [[rock5/linux/radxa-apt | Radxa APT]].

=== Upgrade necessary packages ===

Here is the example of upgrading rockchip-overlay and kernel packages.

$ sudo apt-get update -y && sudo apt-get install -y rockchip-overlay

=== Test RTC Device ===
ROCK 5B is equipped with one RTC IC hym8563.

Firstly, plug in RTC battery to give power to RTC IC. Please note that we should keep the RTC battery in the RTC connector.

Plug in power adaper to power on ROCK 5B.

And confirm that the rtc hym8563 device is created.

root@rock-5b:/home/rock# dmesg | grep rtc
[ 6.407133] rtc-hym8563 6-0051: rtc information is valid
[ 6.412731] rtc-hym8563 6-0051: registered as rtc0
[ 6.413779] rtc-hym8563 6-0051: setting system clock to 2022-06-22T01:22:26 UTC (1655860946)
Secondly, use the following commands to set the system time and synchronize it to rtc0.
root@rock-5b:/home/rock# hwclock -r
2021-06-12 08:10:02.613381+08:00
root@rock-5b:/home/rock# date
Wed Jun 22 10:06:10 CST 2022
root@rock-5b:/home/rock# hwclock -w
root@rock-5b:/home/rock# hwclock -r
root@rock-5b:/home/rock# poweroff
take the RTC battery off，after 10minute or longer，insert the rtc battery and power on rock5b，check whether the RTC is synchronized with the system clock
root@rock-5b:/home/rock# hwclock -r
2022-06-22 10:09:59.214788+08:00
root@rock-5b:/home/rock# date
Wed Jun 22 10:17:01 CST 2022

=== FAN test ===
check the weather the directory /sys/devices/platform/fd8b0010.pwm is existed

root@rock-5b:/home/rock# ls /sys/devices/platform/fd8b0010.pwm
driver driver_override modalias of_node power pwm subsystem supplier:platform:pinctrl uevent

use the bash script to Set PWM period, duty_cycle, polarity and enable with root permission
#! /bin/bash
echo 0 > /sys/class/pwm/pwmchip1/export
sleep 0.2
echo 40000 > /sys/class/pwm/pwmchip1/pwm0/period
sleep 0.2
echo 40000 > /sys/class/pwm/pwmchip1/pwm0/duty_cycle
sleep 0.2
echo normal > /sys/class/pwm/pwmchip1/pwm0/polarity
sleep 0.2
echo 1 > /sys/class/pwm/pwmchip1/pwm0/enable
sleep 0.2
turn off the fan
root@rock-5b:/home/rock# echo 0 > /sys/class/pwm/pwmchip1/pwm0/enable

=== Ethernet ===

<div class="bs-example bs-example-tabs">
<ul id="tabeth" class="nav nav-tabs nav-justified nav-tabs" style="margin:0;">
<li class="active" data-toggle="tab">[http://wiki.radxa.com/Nav_Tabs#5b-ethernet ROCK 5B]</li>
</ul>
</div>
<div id="tabeth" class="tab-content">

<div class="tab-pane active" id="5b-ethernet">
=== 5B Ethernet ===

ROCK 5B is equipped with one 2.5G Ethernet port.
You can use a network cable (one end connected to the external network port or route) to connect your ROCK 5B to the network.
The ROCK 5B will automatically configure the network for your surfing on the Internet.

Ethernet throughput test result table.

{| class="wikitable" border="1"
|-
! Direction
! Bitrate
|-
| Upstream
| 2.34 Gbits/sec
|-
| Downstream
| 2.35 Gbits/sec
|}

===== To test the Ethernet, we need to follow the steps: =====

* Switch to super user mode by command
$ sudo su

* Check whether the Ethernet is normal by command, ifconfig, which would show us a network card, eth0 or enP4p65s0 , and the Ethernet IP address. Also, use tool, ping, to connect to a normal domain.

$ ifconfig
$ ping www.baidu.com

* If failed to connect to a normal domain. , try

$ sudo dhclient eth0
or
$ sudo dhclient enP4p65s0

</div> 
</div>

=== Storage device ===

* microSD card: /dev/mmcblk0
* eMMC: /dev/mmcblk1
* NVME M.2 SDD: /dev/nvme0n1

==== Test microSD card ====

This is the test result of 128GB Sandisk card on ROCK 5B.

{| class="wikitable" border="1"
|-
! Operation
! Speed
|-
| Read
| 87.9MB/s
|-
| Write
| 66.3MB/s
|}

=== Device Serial Number ===

<pre>
root@rock-5b:~# cat /proc/cpuinfo | grep Serial
Serial : 099b83b055b47b27
</pre>

=== Hardware Configuration ===

=== Display Power Management ===

Add the following lines to file /etc/X11/xorg.conf.d/10-monitor.conf

<pre>
Section "ServerLayout"
Option "BlankTime" "0" # Disable blank Screen
Option "StandbyTime" "0" # Disable standby
Option "SuspendTime" "0" # Disable syspend
Option "OffTime" "0"
EndSection
</pre>
=== Changelog ===

Rock5/install/spi

2022-08-09T07:28:38Z

Nasca:

{{rock5_header}}
{{Languages|rock5/dev/usb-install}}
[[rock5 | ROCK 5]] > [[rock5/dev | Development]] > [[rock5/dev/usb-install | Install the Image to SPI Nor Flash]]

== Install the image to SPI Nor Flash from USB port ==
Rock 5 supports Maskrom mode, which is a special operation mode for CPU to wait for USB OTG port command.
The PC tools we use to communicate with rock 5 in Maskrom mode are the '''rkdeveloptool''' and '''RKDevTool'''.
We use '''the rkdeveloptool in Linux/macOS ''' and '''the RKDevTool under Windows'''.

=== Requirement ===

* Rock 5B
* type-c cable
* emmc module
* Windows/linux/macOS PC

=== Install Tools&Drivers ===

Please check this guide, [[rock5/install/rockchip-flash-tools | Install rockchip flash tools under Windows/Linux/MacOS PC]].

=== Boot the board to maskrom mode ===

insert the type-c cable into the power interface(or the usb type-c OTG port),and the other side to PC

[[File:boot5b.png|400px]]

=== Write U-Boot images to SPI Nor Flash or erase SPI Nor Flash ===

==== Linux/MacOS ====

On your PC, run the rkdeveloptool

sudo rkdeveloptool ld
DevNo=1 Vid=0x2207,Pid=0x350b,LocationID=106 Maskrom

Download the loader (flash helper) to init the ram and prepare the flashing environment etc. If you don't have it, you can download it from [https://dl.radxa.com/rock5/sw/images/loader/rk3588_spl_loader_v1.07.111.bin here]

sudo rkdeveloptool db /path/to/rk3588_spl_loader_v1.07.111.bin # will output:
Downloading bootloader succeeded.

Write bootloader. The idbloader.img and the u-boot.itb ,mentioned bellow, can be generated by [Rockchip Debian SDK](https://wiki.radxa.com/Rock5/dev/Debian), and if you don't generate them by yourself , just use what we provide .
[https://dl.radxa.com/rockpi5/images/ idbloader.img] [https://dl.radxa.com/rockpi5/images/ u-boot.itb]

sudo rkdeveloptool wl 64 idbloader.img
Write LBA from file (100%)

sudo rkdeveloptool wl 64 idbloader.img
Write LBA from file (100%)

Reboot the device
rkdeveloptool rd

now , the device should boot on SPI Nor Flash

==== Windows ====
Double click the RKDevTool.exe and you will see the following interface:
Double click the '''RKDevTool.exe''' and you will see the following interface:

===== Step 1: comfirm that rock pi 5b is in maskrom mode =====

If your ROCK Pi 4 is in maskrom mode and connects to PC, you can see that the program detect it, as the red arrow below

===== Step 2: Select Loader =====

Next, click the right last columns in the "Loader" row to select rk3588_spl_loader_v1.07.111.bin

===== Step 3: Select idbloader =====

Next, click the right last columns in the "idbloader" row to select idbloader.img

===== Step 4: Select U-boot =====

Then, click the right last columns in the "u-boot.itb" row to select u-boot.itb

[[File: select.png |700px]]

===== Step 5: Excute =====

Finally, click the "Excute" button, and you will see the content in the red box on the right. When the progress reaches 100%, the download is completed.

[[File: complete.png |700px]]

== Erase SPI Nor Flash ==

=== Linux/MacOS ===

Please notice that when you want to erase SPI Nor Flash, fire these commands. If you don't have zero.img, just use what we provide. [https://dl.radxa.com/rockpi5/images/ zero.img]

rkdeveloptool db rk356x_spl_loader_ddr1056_v1.10.111.bin
rkdeveloptool wl 0 zero.img
rkdeveloptool rd

=== Windows ===

Before Erasing, please comfirm that rock pi 5b is in MASKROM mode

==== Step 1: Download ====
Choose the "Advanced features" button, then select rk3588_spl_loader_v1.07.111.bin, next click the "Download" button

==== Step 2: Erase all ====
Click the "erase all" button

==== Step 3: Reboot device ====

[[File: erase.png |700px]]

=== Troubleshooting ===

* If you have issue with flashing via USB OTG, start a new post on the forum, https://forum.radxa.com/c/rock5.

Rock5/install/spi

2022-08-09T07:27:41Z

Nasca:

{{rock5_header}}
{{Languages|rock5/dev/usb-install}}
[[rock5 | ROCK 5]] > [[rock5/dev | Development]] > [[rock5/dev/usb-install | Install the image to SPI Nor Flash from USB port]]

== Install the image to SPI Nor Flash from USB port ==
Rock 5 supports Maskrom mode, which is a special operation mode for CPU to wait for USB OTG port command.
The PC tools we use to communicate with rock 5 in Maskrom mode are the '''rkdeveloptool''' and '''RKDevTool'''.
We use '''the rkdeveloptool in Linux/macOS ''' and '''the RKDevTool under Windows'''.

=== Requirement ===

* Rock 5B
* type-c cable
* emmc module
* Windows/linux/macOS PC

=== Install Tools&Drivers ===

Please check this guide, [[rock5/install/rockchip-flash-tools | Install rockchip flash tools under Windows/Linux/MacOS PC]].

=== Boot the board to maskrom mode ===

insert the type-c cable into the power interface(or the usb type-c OTG port),and the other side to PC

[[File:boot5b.png|400px]]

=== Write U-Boot images to SPI Nor Flash or erase SPI Nor Flash ===

==== Linux/MacOS ====

On your PC, run the rkdeveloptool

sudo rkdeveloptool ld
DevNo=1 Vid=0x2207,Pid=0x350b,LocationID=106 Maskrom

Download the loader (flash helper) to init the ram and prepare the flashing environment etc. If you don't have it, you can download it from [https://dl.radxa.com/rock5/sw/images/loader/rk3588_spl_loader_v1.07.111.bin here]

sudo rkdeveloptool db /path/to/rk3588_spl_loader_v1.07.111.bin # will output:
Downloading bootloader succeeded.

Write bootloader. The idbloader.img and the u-boot.itb ,mentioned bellow, can be generated by [Rockchip Debian SDK](https://wiki.radxa.com/Rock5/dev/Debian), and if you don't generate them by yourself , just use what we provide .
[https://dl.radxa.com/rockpi5/images/ idbloader.img] [https://dl.radxa.com/rockpi5/images/ u-boot.itb]

sudo rkdeveloptool wl 64 idbloader.img
Write LBA from file (100%)

sudo rkdeveloptool wl 64 idbloader.img
Write LBA from file (100%)

Reboot the device
rkdeveloptool rd

now , the device should boot on SPI Nor Flash

==== Windows ====
Double click the RKDevTool.exe and you will see the following interface:
Double click the '''RKDevTool.exe''' and you will see the following interface:

===== Step 1: comfirm that rock pi 5b is in maskrom mode =====

If your ROCK Pi 4 is in maskrom mode and connects to PC, you can see that the program detect it, as the red arrow below

===== Step 2: Select Loader =====

Next, click the right last columns in the "Loader" row to select rk3588_spl_loader_v1.07.111.bin

===== Step 3: Select idbloader =====

Next, click the right last columns in the "idbloader" row to select idbloader.img

===== Step 4: Select U-boot =====

Then, click the right last columns in the "u-boot.itb" row to select u-boot.itb

[[File: select.png |700px]]

===== Step 5: Excute =====

Finally, click the "Excute" button, and you will see the content in the red box on the right. When the progress reaches 100%, the download is completed.

[[File: complete.png |700px]]

== Erase SPI Nor Flash ==

=== Linux/MacOS ===

Please notice that when you want to erase SPI Nor Flash, fire these commands. If you don't have zero.img, just use what we provide. [https://dl.radxa.com/rockpi5/images/ zero.img]

rkdeveloptool db rk356x_spl_loader_ddr1056_v1.10.111.bin
rkdeveloptool wl 0 zero.img
rkdeveloptool rd

=== Windows ===

Before Erasing, please comfirm that rock pi 5b is in MASKROM mode

==== Step 1: Download ====
Choose the "Advanced features" button, then select rk3588_spl_loader_v1.07.111.bin, next click the "Download" button

==== Step 2: Erase all ====
Click the "erase all" button

==== Step 3: Reboot device ====

[[File: erase.png |700px]]

=== Troubleshooting ===

* If you have issue with flashing via USB OTG, start a new post on the forum, https://forum.radxa.com/c/rock5.

Rock5/install/spi

2022-08-09T07:25:55Z

Nasca: Created page with "{{rock5_header}} {{Languages|rock5/dev/usb-install}} ROCK 5 > Development > Install image to eMMC from USB OTG port..."

{{rock5_header}}
{{Languages|rock5/dev/usb-install}}
[[rock5 | ROCK 5]] > [[rock5/dev | Development]] > [[rock5/dev/usb-install | Install image to eMMC from USB OTG port]]

== Install the image to SPI Nor Flash from USB port ==
Rock 5 supports Maskrom mode, which is a special operation mode for CPU to wait for USB OTG port command.
The PC tools we use to communicate with rock 5 in Maskrom mode are the '''rkdeveloptool''' and '''RKDevTool'''.
We use '''the rkdeveloptool in Linux/macOS ''' and '''the RKDevTool under Windows'''.

=== Requirement ===

* Rock 5B
* type-c cable
* emmc module
* Windows/linux/macOS PC

=== Install Tools&Drivers ===

Please check this guide, [[rock5/install/rockchip-flash-tools | Install rockchip flash tools under Windows/Linux/MacOS PC]].

=== Boot the board to maskrom mode ===

insert the type-c cable into the power interface(or the usb type-c OTG port),and the other side to PC

[[File:boot5b.png|400px]]

=== Write U-Boot images to SPI Nor Flash or erase SPI Nor Flash ===

==== Linux/MacOS ====

On your PC, run the rkdeveloptool

sudo rkdeveloptool ld
DevNo=1 Vid=0x2207,Pid=0x350b,LocationID=106 Maskrom

Download the loader (flash helper) to init the ram and prepare the flashing environment etc. If you don't have it, you can download it from [https://dl.radxa.com/rock5/sw/images/loader/rk3588_spl_loader_v1.07.111.bin here]

sudo rkdeveloptool db /path/to/rk3588_spl_loader_v1.07.111.bin # will output:
Downloading bootloader succeeded.

Write bootloader. The idbloader.img and the u-boot.itb ,mentioned bellow, can be generated by [Rockchip Debian SDK](https://wiki.radxa.com/Rock5/dev/Debian), and if you don't generate them by yourself , just use what we provide .
[https://dl.radxa.com/rockpi5/images/ idbloader.img] [https://dl.radxa.com/rockpi5/images/ u-boot.itb]

sudo rkdeveloptool wl 64 idbloader.img
Write LBA from file (100%)

sudo rkdeveloptool wl 64 idbloader.img
Write LBA from file (100%)

Reboot the device
rkdeveloptool rd

now , the device should boot on SPI Nor Flash

==== Windows ====
Double click the RKDevTool.exe and you will see the following interface:
Double click the '''RKDevTool.exe''' and you will see the following interface:

===== Step 1: comfirm that rock pi 5b is in maskrom mode =====

If your ROCK Pi 4 is in maskrom mode and connects to PC, you can see that the program detect it, as the red arrow below

===== Step 2: Select Loader =====

Next, click the right last columns in the "Loader" row to select rk3588_spl_loader_v1.07.111.bin

===== Step 3: Select idbloader =====

Next, click the right last columns in the "idbloader" row to select idbloader.img

===== Step 4: Select U-boot =====

Then, click the right last columns in the "u-boot.itb" row to select u-boot.itb

[[File: select.png |700px]]

===== Step 5: Excute =====

Finally, click the "Excute" button, and you will see the content in the red box on the right. When the progress reaches 100%, the download is completed.

[[File: complete.png |700px]]

== Erase SPI Nor Flash ==

=== Linux/MacOS ===

Please notice that when you want to erase SPI Nor Flash, fire these commands. If you don't have zero.img, just use what we provide. [https://dl.radxa.com/rockpi5/images/ zero.img]

rkdeveloptool db rk356x_spl_loader_ddr1056_v1.10.111.bin
rkdeveloptool wl 0 zero.img
rkdeveloptool rd

=== Windows ===

Before Erasing, please comfirm that rock pi 5b is in MASKROM mode

==== Step 1: Download ====
Choose the "Advanced features" button, then select rk3588_spl_loader_v1.07.111.bin, next click the "Download" button

==== Step 2: Erase all ====
Click the "erase all" button

==== Step 3: Reboot device ====

[[File: erase.png |700px]]

=== Troubleshooting ===

* If you have issue with flashing via USB OTG, start a new post on the forum, https://forum.radxa.com/c/rock5.

File:Erase.png

2022-08-09T07:19:31Z

Nasca: Nasca uploaded a new version of "File:Erase.png"

File:Select.png

2022-08-09T06:45:30Z

Nasca:

File:Boot5b.png

2022-08-09T06:16:14Z

Nasca:

File:Spi boot.png

2022-08-09T06:14:31Z

Nasca: Nasca uploaded a new version of "File:Spi boot.png"

File:Complete.png

2022-08-09T02:00:03Z

Nasca:

File:Erase.png

2022-08-08T11:44:39Z

Nasca:

File:Maskroom mode.png

2022-08-08T11:44:10Z

Nasca:

File:Spi boot.png

2022-08-08T11:39:02Z

Nasca:

Rock3/hardware

2022-06-23T01:22:56Z

Nasca:

{{rock3_header}}
{{Languages|rock3/hardware}}

__NOTOC__

<div class="col-md-12">
<h3 class="brand-name text-center" style="margin-top:0px;"><span class="label flame">Hardware</span></h3>
<hr class="tagline-divider" />
<h5 class="text-center" style="margin-bottom:20px;">Technical information about ROCK 3 Series hardware</h5>
</div>

<div class="col-md-12 ">
<div class="col-md-12">
<div class="panel panel-meadow-white">
<div class="panel-heading"> <h3 class="panel-title"> SBC </h3> </div>
</div>
</div>

<div class="col-md-4">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">ROCK 3A</h3> </div>
<div class="panel-body">

*[[rock3/hardware/3a | ROCK 3 Model A]]
** [https://dl.radxa.com/rock3/docs/hw/3a/rock3a_v1.3_sch.pdf v1.3 schematic pdf] - Download Schematic of ROCK 3 Model A
** [https://dl.radxa.com/rock3/docs/hw/3a/rock3a_v1.3_2d_dxf.zip v1.3 2D Top&Bottom dxf] - Download 2D CAD of ROCK 3 Model A
** [https://dl.radxa.com/rock3/docs/hw/3a/rock3a_v1.3_3d_emn_emp.zip v1.3 3D] - Download 3D(.emn/.emp format) of ROCK 3 Model A
** [https://dl.radxa.com/rock3/docs/hw/3a/rock3a_v1.3_reference.pdf v1.3 CAM pdf] - Download components Position Reference of ROCK 3 Model A

* [[rock3/hardware/rock3a-gpio | ROCK 3 A GPIO]]

* Compliance
** [https://dl.radxa.com/rock3/compliance/3a/BCTC2112981353C_Rock_3A_RS117-D8U_EMC_Test_Verification_of_Conformity.pdf CE RED] - EU
</div>
</div>
</div>

<div class="col-md-4">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">ROCK 3B </h3> </div>
<div class="panel-body">

*[[rock3/hardware/3b | ROCK 3 model B]]
** [https://dl.radxa.com/rock3 v1.2 schematic] - Download Schematic of ROCK 3 Model B
** [https://dl.radxa.com/rock3 v1.2 CAM pdf] - Download components Position Reference of ROCK 3 Model B
** [https://dl.radxa.com/rock3 2D Top&Bottom dxf] - Download 2D CAD of ROCK 3 Model B

* [[rock3/hardware/3b/gpio | ROCK 3 B GPIO]]

* [[rock3/hardware/revision | Hardware Revision]] - Difference between each hardware revisions
* [[Rock3/hardware/models | Models and SKUs]] - Different variant of each models

</div>
</div>
</div>

</div>

<div class="col-md-12 ">

<div class="col-md-4">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">Radxa CM3 IO Board</h3> </div>
<div class="panel-body">

*[[rock3/CM3/IO | Radxa CM3 IO Board]]
** [https://dl.radxa.com/rock3/docs/hw/ v1.2 schematic pdf] - Download Schematic of CM3 IO board
** [https://dl.radxa.com/rock3/docs/hw/ v1.2 2D Top&Bottom dxf] - Download 2D CAD of CM3 IO board
** [https://dl.radxa.com/rock3/docs/hw/ v1.2 CAM pdf] - Download components Position Reference of CM3 IO board
* [https://github.com/radxa/radxa-cm3-projects/tree/main/radxa-cm3-io Design files of CM3 IO Board]
* [[rock3/CM3/IO/pinout/revision | Hardware Revision]] - Difference between each hardware revisions
* [[rock3/CM3/IO/pinout | Connector and Header pinout]]
* [[rock3/CM3/IO/GPIO | CM3 IO GPIO]]

</div>
</div>
</div>

<div class="col-md-4">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">Radxa E23 </h3> </div>
<div class="panel-body">

*[[rock3/CM3/e23 | Radxa E23]]
** [https://dl.radxa.com/cm3/e23/RADXA_E23_V11_SCH_20211127.pdf v1.1 schematic pdf] - Download Schematic of E23
** [ v1.1 2D Top&Bottom dxf] - Download 2D CAD of E23
** [https://dl.radxa.com/cm3/e23/RADXA_E23_V11_SMD_20211127.pdf v1.1 SMD pdf] - Download components position reference of E23

* [[rock3/CM3/e23/GPIO | E23 GPIO]]

* Compliance
** [https://dl.radxa.com/rock3/compliance/3a/BCTC2112981353C_Rock_3A_RS117-D8U_EMC_Test_Verification_of_Conformity.pdf CE RED] - EU

</div>
</div>
</div>

</div>

<div class="col-md-12">

<div class="col-md-4">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">Radxa E25 </h3> </div>
<div class="panel-body">

*[[Rock3/hardware/e25 | Radxa E25]]
** [https://dl.radxa.com/cm3p/e25/Radxa_CM3p_v1.1_E25_V1.3_SCH_20211201.pdf v1.3 schematic pdf] - Download Schematic of E25 with CM3+
** [https://dl.radxa.com/cm3p/e25/Radxa_E25_SMD_V1.3_20211201.pdf v1.3 SMD pdf] - Download components Position Reference of E25

* [[rock3/CM3p/e25/GPIO | E25 GPIO]]

* Compliance
** [https://dl.radxa.com/rock3 CE RED] - EU

</div>
</div>
</div>

<div class="col-md-12">
<div class="panel panel-meadow-white">
<div class="panel-heading"> <h3 class="panel-title">Datasheets </h3> </div>
<div class="panel-body">

* Datasheet
** [https://dl.radxa.com/rock3/docs/hw/datasheet/Rockchip-RK3568-Datasheet-V1.0-20201210.pdf RK3568 datasheet] - The SoC of ROCK 3
** [https://dl.radxa.com/cm3p/docs/datasheets/Rockchip%c2%a0RK3568J%c2%a0Datasheet%c2%a0V1.0-20220304.pdf RK3568J datasheet] - The SoC of CM3 Plus
** RK3568 TRM(Technical Reference Manual) [https://dl.radxa.com/rock3/docs/hw/datasheet/Rockchip%20RK3568%20TRM%20Part1%20V1.1-20210301.pdf Part 1](17MB, 852 pages), [https://dl.radxa.com/rock3/docs/hw/datasheet/Rockchip%20RK3568%20TRM%20Part2%20V1.1-20210301.pdf Part 2](43MB, 2583 pages)- The detail about RK3568
** [https://dl.radxa.com/rock3/docs/hw/datasheet/RK809-datasheet-v1.01.pdf RK809] - The PMIC
** [https://dl.radxa.com/rock3/docs/hw/datasheets/RTL8211F-CG-Datasheet.pdf RTL8211F] - The ethernet phy
** [https://dl.radxa.com/rock3/docs/hw/datasheets/IP2315-datasheet-cn-V1.0.pdf IP2315] - Charging IC with integrated input fast charge protocol

</div>
</div>
</div>

<div class="col-md-12">
<div class="panel panel-meadow-white">
<div class="panel-heading"> <h3 class="panel-title">Accessories </h3> </div>
<div class="panel-body">

* [[rock3/hardware/wifi | WiFi/BT Cards]]
* [[rock3/hardware/emmc | eMMC module]]
* [[Rock3/hardware/usb3_eMMC_reader | USB3 eMMC Reader]]
* [[rock3/hardware/rtc | RTC battery]]

* Official heatsink
** [https://dl.radxa.com/rockpi4/docs/hw/heatsink-1225-al-1.stp 3D drawing] - 3D model of official heatsink
* [[rock3/hardware/display | Display]]
* [[rock3/hardware/camera/ | Camera module]]

* [[rock3/hardware/HATs | HATs]]
** [[rock3/hardware/PoE | PoE HAT]]
** [[Dual_Quad_SATA_HAT | Dual/Quad SATA HAT]]
** [[Penta_SATA_HAT | Penta SATA HAT]]

* [[rock3/hardware/M2_extend | M.2 extend board]]
** 2D file for M.2 extend board - [https://dl.radxa.com/rockpi4/docs/hw/m2_extend/PCIE_to_FPC_V1.4.dxf Connector to FPC board], [https://dl.radxa.com/rockpi4/docs/hw/m2_extend/FPC_to_M2_V1.4.dxf SSD mount board]
** Schematic of M.2 extend board - [https://dl.radxa.com/rockpi4/docs/hw/m2_extend/rockpi4-m2-extend-sch_pcie_to_fpc_V1.4.pdf Connector to FPC board], [https://dl.radxa.com/rockpi4/docs/hw/m2_extend/rockpi4-m2-extend-sch_fpc_to_m2_V1.4.pdf SSD mount board]
* [[rock3/hardware/spi_flash | SPI Flash]]

* [[Device-tree-overlays | Device Tree Overlays]]

</div>
</div>
</div>

</div>

Rock3/hardware

2022-06-23T01:22:39Z

Nasca:

{{rock3_header}}
{{Languages|rock3/hardware}}

__NOTOC__

<div class="col-md-12">
<h3 class="brand-name text-center" style="margin-top:0px;"><span class="label flame">Hardware</span></h3>
<hr class="tagline-divider" />
<h5 class="text-center" style="margin-bottom:20px;">Technical information about ROCK 3 Series hardware</h5>
</div>

<div class="col-md-12 ">
<div class="col-md-12">
<div class="panel panel-meadow-white">
<div class="panel-heading"> <hs class="panel-title"> SBC </h3> </div>
</div>
</div>

<div class="col-md-4">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">ROCK 3A</h3> </div>
<div class="panel-body">

*[[rock3/hardware/3a | ROCK 3 Model A]]
** [https://dl.radxa.com/rock3/docs/hw/3a/rock3a_v1.3_sch.pdf v1.3 schematic pdf] - Download Schematic of ROCK 3 Model A
** [https://dl.radxa.com/rock3/docs/hw/3a/rock3a_v1.3_2d_dxf.zip v1.3 2D Top&Bottom dxf] - Download 2D CAD of ROCK 3 Model A
** [https://dl.radxa.com/rock3/docs/hw/3a/rock3a_v1.3_3d_emn_emp.zip v1.3 3D] - Download 3D(.emn/.emp format) of ROCK 3 Model A
** [https://dl.radxa.com/rock3/docs/hw/3a/rock3a_v1.3_reference.pdf v1.3 CAM pdf] - Download components Position Reference of ROCK 3 Model A

* [[rock3/hardware/rock3a-gpio | ROCK 3 A GPIO]]

* Compliance
** [https://dl.radxa.com/rock3/compliance/3a/BCTC2112981353C_Rock_3A_RS117-D8U_EMC_Test_Verification_of_Conformity.pdf CE RED] - EU
</div>
</div>
</div>

<div class="col-md-4">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">ROCK 3B </h3> </div>
<div class="panel-body">

*[[rock3/hardware/3b | ROCK 3 model B]]
** [https://dl.radxa.com/rock3 v1.2 schematic] - Download Schematic of ROCK 3 Model B
** [https://dl.radxa.com/rock3 v1.2 CAM pdf] - Download components Position Reference of ROCK 3 Model B
** [https://dl.radxa.com/rock3 2D Top&Bottom dxf] - Download 2D CAD of ROCK 3 Model B

* [[rock3/hardware/3b/gpio | ROCK 3 B GPIO]]

* [[rock3/hardware/revision | Hardware Revision]] - Difference between each hardware revisions
* [[Rock3/hardware/models | Models and SKUs]] - Different variant of each models

</div>
</div>
</div>

</div>

<div class="col-md-12 ">

<div class="col-md-4">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">Radxa CM3 IO Board</h3> </div>
<div class="panel-body">

*[[rock3/CM3/IO | Radxa CM3 IO Board]]
** [https://dl.radxa.com/rock3/docs/hw/ v1.2 schematic pdf] - Download Schematic of CM3 IO board
** [https://dl.radxa.com/rock3/docs/hw/ v1.2 2D Top&Bottom dxf] - Download 2D CAD of CM3 IO board
** [https://dl.radxa.com/rock3/docs/hw/ v1.2 CAM pdf] - Download components Position Reference of CM3 IO board
* [https://github.com/radxa/radxa-cm3-projects/tree/main/radxa-cm3-io Design files of CM3 IO Board]
* [[rock3/CM3/IO/pinout/revision | Hardware Revision]] - Difference between each hardware revisions
* [[rock3/CM3/IO/pinout | Connector and Header pinout]]
* [[rock3/CM3/IO/GPIO | CM3 IO GPIO]]

</div>
</div>
</div>

<div class="col-md-4">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">Radxa E23 </h3> </div>
<div class="panel-body">

*[[rock3/CM3/e23 | Radxa E23]]
** [https://dl.radxa.com/cm3/e23/RADXA_E23_V11_SCH_20211127.pdf v1.1 schematic pdf] - Download Schematic of E23
** [ v1.1 2D Top&Bottom dxf] - Download 2D CAD of E23
** [https://dl.radxa.com/cm3/e23/RADXA_E23_V11_SMD_20211127.pdf v1.1 SMD pdf] - Download components position reference of E23

* [[rock3/CM3/e23/GPIO | E23 GPIO]]

* Compliance
** [https://dl.radxa.com/rock3/compliance/3a/BCTC2112981353C_Rock_3A_RS117-D8U_EMC_Test_Verification_of_Conformity.pdf CE RED] - EU

</div>
</div>
</div>

</div>

<div class="col-md-12">

<div class="col-md-4">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">Radxa E25 </h3> </div>
<div class="panel-body">

*[[Rock3/hardware/e25 | Radxa E25]]
** [https://dl.radxa.com/cm3p/e25/Radxa_CM3p_v1.1_E25_V1.3_SCH_20211201.pdf v1.3 schematic pdf] - Download Schematic of E25 with CM3+
** [https://dl.radxa.com/cm3p/e25/Radxa_E25_SMD_V1.3_20211201.pdf v1.3 SMD pdf] - Download components Position Reference of E25

* [[rock3/CM3p/e25/GPIO | E25 GPIO]]

* Compliance
** [https://dl.radxa.com/rock3 CE RED] - EU

</div>
</div>
</div>

<div class="col-md-12">
<div class="panel panel-meadow-white">
<div class="panel-heading"> <h3 class="panel-title">Datasheets </h3> </div>
<div class="panel-body">

* Datasheet
** [https://dl.radxa.com/rock3/docs/hw/datasheet/Rockchip-RK3568-Datasheet-V1.0-20201210.pdf RK3568 datasheet] - The SoC of ROCK 3
** [https://dl.radxa.com/cm3p/docs/datasheets/Rockchip%c2%a0RK3568J%c2%a0Datasheet%c2%a0V1.0-20220304.pdf RK3568J datasheet] - The SoC of CM3 Plus
** RK3568 TRM(Technical Reference Manual) [https://dl.radxa.com/rock3/docs/hw/datasheet/Rockchip%20RK3568%20TRM%20Part1%20V1.1-20210301.pdf Part 1](17MB, 852 pages), [https://dl.radxa.com/rock3/docs/hw/datasheet/Rockchip%20RK3568%20TRM%20Part2%20V1.1-20210301.pdf Part 2](43MB, 2583 pages)- The detail about RK3568
** [https://dl.radxa.com/rock3/docs/hw/datasheet/RK809-datasheet-v1.01.pdf RK809] - The PMIC
** [https://dl.radxa.com/rock3/docs/hw/datasheets/RTL8211F-CG-Datasheet.pdf RTL8211F] - The ethernet phy
** [https://dl.radxa.com/rock3/docs/hw/datasheets/IP2315-datasheet-cn-V1.0.pdf IP2315] - Charging IC with integrated input fast charge protocol

</div>
</div>
</div>

<div class="col-md-12">
<div class="panel panel-meadow-white">
<div class="panel-heading"> <h3 class="panel-title">Accessories </h3> </div>
<div class="panel-body">

* [[rock3/hardware/wifi | WiFi/BT Cards]]
* [[rock3/hardware/emmc | eMMC module]]
* [[Rock3/hardware/usb3_eMMC_reader | USB3 eMMC Reader]]
* [[rock3/hardware/rtc | RTC battery]]

* Official heatsink
** [https://dl.radxa.com/rockpi4/docs/hw/heatsink-1225-al-1.stp 3D drawing] - 3D model of official heatsink
* [[rock3/hardware/display | Display]]
* [[rock3/hardware/camera/ | Camera module]]

* [[rock3/hardware/HATs | HATs]]
** [[rock3/hardware/PoE | PoE HAT]]
** [[Dual_Quad_SATA_HAT | Dual/Quad SATA HAT]]
** [[Penta_SATA_HAT | Penta SATA HAT]]

* [[rock3/hardware/M2_extend | M.2 extend board]]
** 2D file for M.2 extend board - [https://dl.radxa.com/rockpi4/docs/hw/m2_extend/PCIE_to_FPC_V1.4.dxf Connector to FPC board], [https://dl.radxa.com/rockpi4/docs/hw/m2_extend/FPC_to_M2_V1.4.dxf SSD mount board]
** Schematic of M.2 extend board - [https://dl.radxa.com/rockpi4/docs/hw/m2_extend/rockpi4-m2-extend-sch_pcie_to_fpc_V1.4.pdf Connector to FPC board], [https://dl.radxa.com/rockpi4/docs/hw/m2_extend/rockpi4-m2-extend-sch_fpc_to_m2_V1.4.pdf SSD mount board]
* [[rock3/hardware/spi_flash | SPI Flash]]

* [[Device-tree-overlays | Device Tree Overlays]]

</div>
</div>
</div>

</div>

Rock3/hardware

2022-06-23T01:19:02Z

Nasca: